私の C++ プログラミング クラスでは、5 人の従業員用の給与計算レコーダーを作成する任務を負っています。要件の 1 つはグローバル変数ではないため、個々の関数内でローカルに変数を宣言して渡す必要があると思います。
エラーの意味はわかりますが、解決策を実装する方法がわかりません。参照渡し/値渡しがパラメーターで意味があるかどうかさえわかりません.doCalculations（）、displayPayrollSummaryResults（）、およびdisplayEmployeeResults（）に関する3つのエラーが原因でコンパイルできませんメインに0の引数があります(). これが私が持っている doCalculations() です。
この前に getInput と呼ばれる別の関数があり、empID、payrollType などのユーザー入力を取得して、payrollArray に入れます。配列の残りの部分は、この関数から計算されたデータを格納するために使用されます。その後、結果を表示するための関数がいくつか追加されます (最後に完全なコードを参照してください)。
void doCalculations(
double payrollArray[12][5],
int &empID,
char &payrollType,
double &hoursWorked,
double &payRate,
int &unionCode
)
{
// Defeind Variables - Calculations
int totalEmployee;
double totalGrossPay;
double totalNetPay;
double highestGrossPay;
double lowestGrossPay;
double idHighestGrossPay;
double idLowestGrossPay;
double averageGrossPay;
double averageNetPay;
// - Pay Calucations
double regularPay;
double overtimePay;
double grossPay;
// - Tax Calculations
double stateTax;
double federalTax;
double totalTax;
// - Union Dues
double unionDues;
// - Net Pay
double netPay;
//Pay Calucations - Work more than 40 hours
if( hoursWorked > 40 ){
regularPay = payRate * 40;
overtimePay = ( 1.5 * payRate ) * ( hoursWorked - 40 );
grossPay = regularPay + overtimePay;
}
//Pay Calucations - Work less than 40 hours
else{
regularPay = payRate * hoursWorked;
overtimePay = 0;
grossPay = regularPay;
}
//Put pay calcuations into array
payrollArray[4][totalEmployee] = regularPay;
payrollArray[5][totalEmployee] = overtimePay;
payrollArray[6][totalEmployee] = grossPay;
//Taxes Calculations
// State Tax Calculations
if( grossPay < 500)
stateTax = 0;
else if ( grossPay >= 500 && grossPay <= 1000 )
stateTax = grossPay * 0.03;
else if ( grossPay > 1000)
stateTax = grossPay * 0.05;
// Federal Tax Calculations
if( grossPay < 500)
federalTax = 0;
else if ( grossPay >= 500 && grossPay <= 1000 )
federalTax = grossPay * 0.05;
else if ( grossPay > 1000)
federalTax = grossPay * 0.07;
totalTax = stateTax + federalTax;
// Put Taxes into array
payrollArray[7][totalEmployee] = stateTax;
payrollArray[8][totalEmployee] = federalTax;
payrollArray[9][totalEmployee] = totalTax;
// Define Variables - Union dues
if (unionCode = 1)
unionDues = 15.00;
else if (unionCode = 2)
unionDues = 25.00;
else if (unionCode = 3)
unionDues = 35.00;
// Net Pay Calculation
netPay = grossPay - totalTax - unionDues;
// Put unionDues & netPay into array
payrollArray[10][totalEmployee] = unionDues;
payrollArray[11][totalEmployee] = netPay;
// Add 1 to totalEmployee per calculation
totalEmployee += 1;
// Perpetual Summary Data Calculation
// Total Gross Pay (Category 6)
for ( int i = 0; i < totalEmployee; ++i)
totalGrossPay += payrollArray[6][i];
// Total Net Pay (Category 11)
for ( int i = 0; i < totalEmployee; ++i)
totalNetPay += payrollArray[11][i];
// Find Employee ID number of highest gross pay
// Compare and Find higest gross pay
highestGrossPay = 0; // assume highest gross pay is 0 for now
for (int grossPay = 0; grossPay < totalEmployee; ++grossPay)
{
if ( payrollArray[6][grossPay] > highestGrossPay )
highestGrossPay = payrollArray[6][grossPay]; // new highestGrossPay, gross pay field is at 6.
}
// Using highest gross pay to find corresponding employee ID
for (int id = 0; id < totalEmployee; ++ id)
{
if ( payrollArray[6][id] == highestGrossPay)
idHighestGrossPay = payrollArray[0][id]; // the empID field is at 0,
}
// Find Employee ID number of lowest gross pay
// Compare and Find lowest gross pay
lowestGrossPay = 3150; // assume lowest gross pay is maximum of 3150 for now
for (int grossPay = 0; grossPay < totalEmployee; ++grossPay)
{
if ( payrollArray[6][grossPay] < lowestGrossPay )
lowestGrossPay = payrollArray[6][grossPay]; // new lowestGrossPay, gross pay field is at 6.
}
// Using highest gross pay to find corresponding employee ID
for (int id = 0; id < totalEmployee; ++ id)
{
if ( payrollArray[6][id] == lowestGrossPay)
idLowestGrossPay = payrollArray[0][id]; // the empID field is at 0,
}
// Average Gross Pay
averageGrossPay = totalGrossPay / totalEmployee;
// Average Net Pay
averageNetPay = totalNetPay / totalEmployee;
}
main() で newPayroll.doCalculations("what to put here?") をどうするか、(double payrollArray[12][5], int &empID....) を入れて試行錯誤するだけで、 C++ レッスンのコンストラクターまたは関数プロトタイプをかなり保持していますが、コードのブロックが不足している可能性がありますか?
int main()
{
// Introduction Message
cout << "WELCOME - EMPLOYEE PAYROLL RECORDER" << endl;
cout << endl;
Payroll newPayroll;
int employeeLimit = 0; // Employee limit counter
char addEmployee = 'y';// Initial Yes on Add Employee
do{
newPayroll.getInput();
newPayroll.doCalculations();
cout << "Would you want to continue adding employees? Enter [Y] or [y] for Yes." << endl;
cout << "Otherwise Press Any Other Character to Stop adding more Records" << endl;
cin >> addEmployee;
++employeeLimit;
}while((addEmployee == 'y' || addEmployee == 'Y') && employeeLimit < 5);
cout << endl; // blank line separator
newPayroll.displayEmployeeResults();
cout << endl; // blank line separator
newPayroll.displayPayrollSummaryResults();
cout << endl; // blank line separator
system("PAUSE");
return 0;
}
プログラムの完全なコードは次のとおりです。
#include "stdafx.h"
#include <iostream>
#include <iomanip>
using namespace std;
// Payroll class definition
class Payroll
{
public:
/* getInput(), Function to accept and validates data, stores valid input data in arrays */
void getInput()
{
int empID;
char payrollType;
double hoursWorked;
double payRate;
int unionCode;
int totalEmployee;
double payrollArray[12][5]; // Initialize a 12 rows 5 coloums array for storing payroll data.
char payrollTypeArray[1][5]; // Initialize a separate array for storing payrollType char data.
cout << "Please Enter Employee ID: " << endl;
cin >> empID;
while( empID < 100 || empID > 800 ){
cout << "The Employee ID Entered is Invalid, Please Enter Employee ID (100 - 800): " << endl;
cin >> empID;
}
//put employee id into array
payrollArray[0][totalEmployee] = empID;
cout << "Please Enter payroll type: " << endl;
cin >> payrollType;
while( payrollType != 'H' && payrollType != 'h' ){
cout << "The Payroll Type Entered is Invalid, Please Enter Payroll Type (H or h): " << endl;
cin >> payrollType;
}
//put payrollType into array
payrollTypeArray[1][totalEmployee] = payrollType;
cout << "Please Enter Hours Worked: " << endl;
cin >> hoursWorked;
while( hoursWorked < 0 || hoursWorked > 60.0 ){
cout << "The Hours Worked Entered is Invalid, Please Enter Hours Worked (0 - 60): " << endl;
cin >> hoursWorked;
}
//put hoursWorked into array
payrollArray[2][totalEmployee] = hoursWorked;
cout << "Please Enter Pay Rate: " << endl;
cin >> payRate;
while( payRate < 8.50 || payRate > 45.00 ){
cout << "The Hourly Pay Rate Entered is Invalid, Please Enter Pay Rate (8.50 - 45.00): " << endl;
cin >> payRate;
}
//put payRate into array
payrollArray[3][totalEmployee] = payRate;
cout << "Please Enter Union Code: " << endl;
cin >> unionCode;
while( unionCode !=1 && unionCode !=2 && unionCode !=3 ){
cout << "The Union Code Entered is Invalid, Please Enter Union Code (1, 2 or 3): " << endl;
cin >> unionCode;
}
}
/* doCalculations(), performs calculations using data sotred in input arrays, store
calculation results in arrays, and accumulates totals */
void doCalculations(
double payrollArray[12][5],
int &empID,
char &payrollType,
double &hoursWorked,
double &payRate,
int &unionCode
)
{
// Defeind Variables - Calculations
int totalEmployee;
double totalGrossPay;
double totalNetPay;
double highestGrossPay;
double lowestGrossPay;
double idHighestGrossPay;
double idLowestGrossPay;
double averageGrossPay;
double averageNetPay;
// - Pay Calucations
double regularPay;
double overtimePay;
double grossPay;
// - Tax Calculations
double stateTax;
double federalTax;
double totalTax;
// - Union Dues
double unionDues;
// - Net Pay
double netPay;
//Pay Calucations - Work more than 40 hours
if( hoursWorked > 40 ){
regularPay = payRate * 40;
overtimePay = ( 1.5 * payRate ) * ( hoursWorked - 40 );
grossPay = regularPay + overtimePay;
}
//Pay Calucations - Work less than 40 hours
else{
regularPay = payRate * hoursWorked;
overtimePay = 0;
grossPay = regularPay;
}
//Put pay calcuations into array
payrollArray[4][totalEmployee] = regularPay;
payrollArray[5][totalEmployee] = overtimePay;
payrollArray[6][totalEmployee] = grossPay;
//Taxes Calculations
// State Tax Calculations
if( grossPay < 500)
stateTax = 0;
else if ( grossPay >= 500 && grossPay <= 1000 )
stateTax = grossPay * 0.03;
else if ( grossPay > 1000)
stateTax = grossPay * 0.05;
// Federal Tax Calculations
if( grossPay < 500)
federalTax = 0;
else if ( grossPay >= 500 && grossPay <= 1000 )
federalTax = grossPay * 0.05;
else if ( grossPay > 1000)
federalTax = grossPay * 0.07;
totalTax = stateTax + federalTax;
// Put Taxes into array
payrollArray[7][totalEmployee] = stateTax;
payrollArray[8][totalEmployee] = federalTax;
payrollArray[9][totalEmployee] = totalTax;
// Define Variables - Union dues
if (unionCode = 1)
unionDues = 15.00;
else if (unionCode = 2)
unionDues = 25.00;
else if (unionCode = 3)
unionDues = 35.00;
// Net Pay Calculation
netPay = grossPay - totalTax - unionDues;
// Put unionDues & netPay into array
payrollArray[10][totalEmployee] = unionDues;
payrollArray[11][totalEmployee] = netPay;
// Add 1 to totalEmployee per calculation
totalEmployee += 1;
// Perpetual Summary Data Calculation
// Total Gross Pay (Category 6)
for ( int i = 0; i < totalEmployee; ++i)
totalGrossPay += payrollArray[6][i];
// Total Net Pay (Category 11)
for ( int i = 0; i < totalEmployee; ++i)
totalNetPay += payrollArray[11][i];
// Find Employee ID number of highest gross pay
// Compare and Find higest gross pay
highestGrossPay = 0; // assume highest gross pay is 0 for now
for (int grossPay = 0; grossPay < totalEmployee; ++grossPay)
{
if ( payrollArray[6][grossPay] > highestGrossPay )
highestGrossPay = payrollArray[6][grossPay]; // new highestGrossPay, gross pay field is at 6.
}
// Using highest gross pay to find corresponding employee ID
for (int id = 0; id < totalEmployee; ++ id)
{
if ( payrollArray[6][id] == highestGrossPay)
idHighestGrossPay = payrollArray[0][id]; // the empID field is at 0,
}
// Find Employee ID number of lowest gross pay
// Compare and Find lowest gross pay
lowestGrossPay = 3150; // assume lowest gross pay is maximum of 3150 for now
for (int grossPay = 0; grossPay < totalEmployee; ++grossPay)
{
if ( payrollArray[6][grossPay] < lowestGrossPay )
lowestGrossPay = payrollArray[6][grossPay]; // new lowestGrossPay, gross pay field is at 6.
}
// Using highest gross pay to find corresponding employee ID
for (int id = 0; id < totalEmployee; ++ id)
{
if ( payrollArray[6][id] == lowestGrossPay)
idLowestGrossPay = payrollArray[0][id]; // the empID field is at 0,
}
// Average Gross Pay
averageGrossPay = totalGrossPay / totalEmployee;
// Average Net Pay
averageNetPay = totalNetPay / totalEmployee;
}
/* displayEmployeeResults(), displays employee IDs and calculations results that are stored in arrays.*/
void displayEmployeeResults(
double payrollArray[12][5],
char payrollTypeArray[1][5],
int &totalEmployee
)
{
int employeeCount;
int arrayDataSetw = 5;
int arrayTitleSetw = 12;
//Display Data Array
cout << setw(50) <<"Individual Employee Payroll Record" << endl;
cout << endl;
// Employee ID title
cout << setw(arrayTitleSetw) << "Employee ID";
for (employeeCount = 0; employeeCount < totalEmployee; ++employeeCount)
cout << setw(arrayDataSetw) << payrollArray[0][employeeCount] << setw(arrayDataSetw);
cout << endl;
// Payroll Type title
cout << setw(arrayTitleSetw) << "Payroll Type";
for (employeeCount = 0; employeeCount < totalEmployee; ++employeeCount)
cout << setw(arrayDataSetw) << payrollTypeArray[1][employeeCount] << setw(arrayDataSetw);
cout << endl;
// Hours Worked title
cout << setw(arrayTitleSetw) << "Hours Worked";
for (employeeCount = 0; employeeCount < totalEmployee; ++employeeCount)
cout << setw(arrayDataSetw) << payrollArray[2][employeeCount] << setw(arrayDataSetw);
cout << endl;
// Pay Rate title
cout << setw(arrayTitleSetw) << "Pay Rate";
for (employeeCount = 0; employeeCount < totalEmployee; ++employeeCount)
cout << setw(arrayDataSetw) << "$" << payrollArray[3][employeeCount] << setw(arrayDataSetw);
cout << endl;
// Regular Pay title
cout << setw(arrayTitleSetw) << "Regular Pay";
for (employeeCount = 0; employeeCount < totalEmployee; ++employeeCount)
cout << setw(arrayDataSetw) << "$" << payrollArray[4][employeeCount] << setw(arrayDataSetw);
cout << endl;
// Overtime Pay title
cout << setw(arrayTitleSetw) << "Overtime Pay";
for (employeeCount = 0; employeeCount < totalEmployee; ++employeeCount)
cout << setw(arrayDataSetw) << "$" << payrollArray[5][employeeCount] << setw(arrayDataSetw);
cout << endl;
// Gross Pay title
cout << setw(arrayTitleSetw) << "Gross Pay";
for (employeeCount = 0; employeeCount < totalEmployee; ++employeeCount)
cout << setw(arrayDataSetw) << "$" << payrollArray[6][employeeCount] << setw(arrayDataSetw);
cout << endl;
// State Tax title
cout << setw(arrayTitleSetw) << "State Tax";
for (employeeCount = 0; employeeCount < totalEmployee; ++employeeCount)
cout << setw(arrayDataSetw) << "$" << payrollArray[7][employeeCount] << setw(arrayDataSetw);
cout << endl;
// Federal Tax title
cout << setw(arrayTitleSetw) << "Federal Tax";
for (employeeCount = 0; employeeCount < totalEmployee; ++employeeCount)
cout << setw(arrayDataSetw) << "$" << payrollArray[8][employeeCount] << setw(arrayDataSetw);
cout << endl;
// Total Tax title
cout << setw(arrayTitleSetw) << "Total Tax";
for (employeeCount = 0; employeeCount < totalEmployee; ++employeeCount)
cout << setw(arrayDataSetw) << "$" << payrollArray[9][employeeCount] << setw(arrayDataSetw);
cout << endl;
// Union Dues title
cout << setw(arrayTitleSetw) << "Union Dues";
for (employeeCount = 0; employeeCount < totalEmployee; ++employeeCount)
cout << setw(arrayDataSetw) << "$" << payrollArray[10][employeeCount] << setw(arrayDataSetw);
cout << endl;
// Net Pay title
cout << setw(arrayTitleSetw) << "Net Pay";
for (employeeCount = 0; employeeCount < totalEmployee; ++employeeCount)
cout << setw(arrayDataSetw) << "$" << payrollArray[11][employeeCount] << setw(arrayDataSetw);
cout << endl;
}
/* displayPayrollSummaryResults(), displays summary totals and averages */
void displayPayrollSummaryResults(
int &totalEmployee,
double &totalGrossPay,
double &totalNetPay,
double &idHighestGrossPay,
double &highestGrossPay,
double &idLowestGrossPay,
double &lowestGrossPay,
double &averageGrossPay,
double &averageNetPay
)
{
int summaryDataSetw = 47;
// Display Summary Data
cout << setw(50) <<"Employee Payroll Summary" << endl;
cout << endl;
cout << setw(summaryDataSetw) << "Total Number of Employees on record is: " << totalEmployee << endl;
cout << setw(summaryDataSetw) << "Total Gross Pay is: $" << totalGrossPay << endl;
cout << setw(summaryDataSetw) << "Total Net Pay is: $" << totalNetPay << endl;
cout << setw(summaryDataSetw) << "Employee with the highest gross pay: Employee #" << idHighestGrossPay << " earned $" << highestGrossPay << endl;
cout << setw(summaryDataSetw) << "Employee with the lowest gross pay: Employee #" << idLowestGrossPay << " earned $" << lowestGrossPay << endl;
cout << setw(summaryDataSetw) << "Average gross pay is: $" << averageGrossPay << endl;
cout << setw(summaryDataSetw) << "Average net pay is: $" << averageNetPay << endl;
}
};
int main()
{
// Introduction Message
cout << "WELCOME - EMPLOYEE PAYROLL RECORDER" << endl;
cout << endl;
Payroll newPayroll;
int employeeLimit = 0; // Employee limit counter
char addEmployee = 'y';// Initial Yes on Add Employee
do{
newPayroll.getInput();
newPayroll.doCalculations();
cout << "Would you want to continue adding employees? Enter [Y] or [y] for Yes." << endl;
cout << "Otherwise Press Any Other Character to Stop adding more Records" << endl;
cin >> addEmployee;
++employeeLimit;
}while((addEmployee == 'y' || addEmployee == 'Y') && employeeLimit < 5);
cout << endl; // blank line separator
newPayroll.displayEmployeeResults();
cout << endl; // blank line separator
newPayroll.displayPayrollSummaryResults();
cout << endl; // blank line separator
system("PAUSE");
return 0;
}