私は.vimrc最近多くの変更を加えてきました、そしてどこかで私は望ましくない機能を導入しました。検索トークンが1行に複数回表示される置換コマンドを実行すると、最初のトークンのみが変更されます（ただし、置換の結果、残りのトークンが強調表示されます）。ケースバイケースでこの動作を有効にする方法についての投稿をいくつか見ましたが、これがデフォルトの動作になる原因や無効にする方法についてはまだわかりません。誰かアイデアがあれば、よろしくお願いします。
参考までに、私の.vimrc（https://github.com/chpatton013/dotfiles/blob/master/vim/.vimrc）：
"""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""
" Autocommands
"""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""
" Reread configuration of Vim if .vimrc is saved
augroup VimConfig
au!
au BufWritePost ~/.vimrc so ~/.vimrc
au BufWritePost _vimrc so ~/_vimrc
au BufWritePost vimrc so ~/.vimrc
augroup END
" Set colorcolumn to 80 chars, or (if not supported) highlight lines > 80 chars
augroup ColorColumnConfig
au!
if exists('+colorcolumn')
au BufWinEnter * set colorcolumn=80
au BufWinEnter * hi ColorColumn ctermbg=lightgrey guibg=lightgrey
else
au BufWinEnter * let w:m2=matchadd('ErrorMsg', '\%>80v.\+', -1)
endif
augroup END
" Highlight over-length characters and trailing whitespace
augroup ExtraCharacters
au!
au ColorScheme * highlight ExtraWhitespace ctermbg=Red guibg=Red
au ColorScheme * highlight OverLength ctermbg=red ctermfg=white guibg=red guifg=white
au BufWinEnter * let w:whitespace_match_number =
\ matchadd('ExtraWhitespace', '\s\+$')
au BufWinEnter * call matchadd('OverLength',
\ '\(^\(\s\)\{-}\(*\|//\|/\*\)\{1}\(.\)*\(\%81v\)\)\@<=\(.\)\{1,}$')
au InsertEnter * call s:ToggleWhitespaceMatch('i')
au InsertLeave * call s:ToggleWhitespaceMatch('n')
augroup END
" Resize splits on window resize
au VimResized * exe "normal! \<c-w>="
" Restore the cursor when we can.
au BufWinEnter * call RestoreCursor()
" Change the statusline color based on current mode
augroup StatuslineColor
au!
au InsertEnter * call InsertStatuslineColor(v:insertmode)
au InsertLeave * hi statusline ctermfg=cyan ctermbg=black guifg=cyan guibg=black
augroup END
"""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""
"""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""
" Plugins
"""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""
" Pathogen - https://github.com/tpope/vim-pathogen
runtime bundle/vim-pathogen/autoload/pathogen.vim
call pathogen#infect()
call pathogen#helptags()
" Easymotion - https://github.com/Lokaltog/vim-easymotion/
" This is so much more convenient
let g:EasyMotion_leader_key=',m'
" Neocomplcache - https://github.com/Shougo/neocomplcache
" Enable at startup.
let g:neocomplcache_enable_at_startup=1
" Only display 'n' items in the list.
let g:neocomplcache_max_list=5
" Do not auto-select the first candidate.
let g:neocomplcache_enable_auto_select=1
" Do not try to match until 'n' characters have been typed
let g:neocomplcache_auto_completion_start_length=3
" Do not try to match to anything less than 'n' characters
let g:neocomplcache_min_keyword_length=6
let g:neocomplcache_min_syntax_length=6
" Only consider case if an uppercase character has been typed
let g:neocomplcache_enable_smart_case=1
" Syntastic - https://github.com/scrooloose/syntastic/
" Commands:
" :Errors // pop up location list and display errors
" :SyntasticToggleMode // toggles between active and passive mode
" :SyntasticCheck // forces a syntax check in passive mode
" check for syntax errors on file open
let g:syntastic_check_on_open=1
" echo errors to the command window
let g:syntastic_echo_current_error=1
" mark lines with errors and warnings
let g:syntastic_enable_signs=1
" set sign symbols
let g:syntastic_error_symbol='E>'
let g:syntastic_warning_symbol='W>'
let g:syntastic_style_error_symbol='S>'
let g:syntastic_style_warning_symbol='s>'
" open error balloons when moused over erroneous lines
let g:syntastic_enable_balloons=1
" customize Syntastic statusline
let g:syntastic_stl_format = '[%E{E: %fe #%e}%B{, }%W{W: %fw #%w}]'
"""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""
"""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""
" Functions
"""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""
" Strip trailing whitespace
function! <SID>StripTrailingWhitespaces()
let _s=@/
let l = line(".")
let c = col(".")
%s/\s\+$//e
let @/=_s
call cursor(l, c)
endfunction
" Toggle match of trailing whitespace
function! s:ToggleWhitespaceMatch(mode)
let pattern = (a:mode == 'i') ? '\s\+\%#\@<!$' : '\s\+$'
if exists('w:whitespace_match_number')
call matchdelete(w:whitespace_match_number)
call matchadd('ExtraWhitespace', pattern, 10, w:whitespace_match_number)
else
" Something went wrong, try to be graceful.
let w:whitespace_match_number = matchadd('ExtraWhitespace', pattern)
endif
endfunction
" Restore the cursor when we can
function! RestoreCursor()
if line("'\"") <= line("$")
normal! g`"
normal! zz
endif
endfunction
" Change the statusline color based on current mode
function! InsertStatuslineColor(mode)
if a:mode == 'i'
hi statusline ctermfg=darkmagenta ctermbg=black guifg=darkmagenta guibg=black
elseif a:mode == 'r'
hi statusline ctermfg=darkgreen ctermbg=black guifg=darkgreen guibg=black
else
hi statusline ctermfg=darkred ctermbg=black guifg=darkred guibg=black
endif
endfunction
"""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""
"""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""
" Configuration customization
"""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""
" gui configuration (do not move from top of configurations)
set guioptions=am
set guifont=Consolas:h9
set encoding=utf-8
set fileencoding=utf-8
set nocompatible " No compatibility with vi.
filetype on " Recognize syntax by file extension.
filetype indent on " Check for indent file.
filetype plugin on " Allow plugins to be loaded by file type.
behave xterm " Maintain keybindings across enviornments
set autowrite " Write before executing the 'make' command.
set background=dark " Background light, so foreground not bold.
set backspace=indent,eol,start " Allow <BS> to go over indents, eol, and start of insert
set expandtab " Expand tabs with spaces.
set nofoldenable " Disable folds; toggle with zi.
set gdefault " Assume :s uses /g.
set hidden " Use hidden buffers so unsaved buffers can go to the background
set history=500 " Set number of lines for vim to remember
set hlsearch " Highlight all search matches
set ignorecase " Ignore case in regular expressions
set incsearch " Immediately highlight search matches.
set laststatus=2 " Show status line even where there is only one window
set lazyredraw " Redraw faster
set linespace=-1 " Bring lines closer together vertically
set modeline " Check for a modeline.
set noerrorbells " No beeps on errors.
set nohls " Don't highlight all regex matches.
set nowrap " Don't soft wrap.
set number " Display line numbers.
set path=~/Code/** " Set default path
set scrolloff=5 " Keep min of 'n' lines above/below cursor.
set shellslash " Use forward slashes regardless of OS
set shiftwidth=3 " >> and << shift 3 spaces.
set showcmd " Show partial commands in the status line.
set showmatch " Show matching () {} etc..
set showmode " Show current mode.
set sidescrolloff=10 " Keep min of 'n' columns right/left cursor.
set smartcase " Searches are case-sensitive if caps used.
set smarttab " Tabs and backspaces at the start of a line indent the line one level
set smartindent " Maintains most indentation and adds extra level when nesting
set softtabstop=3 " See spaces as tabs.
set splitright splitbelow " Open splits below and to the right
set synmaxcol=160 " Only matches syntax on first 'n' columns of each line ( faster)
set tabstop=3 " <Tab> move three characters
set textwidth=79 " Hard wrap at 79 characters
set title " Set the console title
set viminfo='20,\"500,% " Adjust viminfo contents
set virtualedit=block " Allow the cursor to go where it should not
set wildmenu " Tab completion opens a Tab- and arrow-navigable menu
set wildmode=longest,full " Tab completion works like bash.
set wrapscan " Searching wraps to start of file when end is reached
" Define statusline
set statusline=%f " Relative file path
set statusline+=%(\ [%M%R%H%W]%) " File flags (mod, RO, help, preview)
set statusline+=%(\ %<%) " Start truncation
set statusline+=%(\ %{fugitive#statusline()}%) " Git branch name (if applicable)
set statusline+=%= " Begin right justification
set statusline+=%#warningmsg# " Start warning highlighting
set statusline+=%(\ %{SyntasticStatuslineFlag()}%) " Show Syntastic errors and warnings
set statusline+=%* " End warning highlighting
set statusline+=\ [line\ %l\/%L,\ col\ %c%V,\ %p%%] " Line and column numbers and percentage through file
" Text formatting settings
" t: Auto-wrap text using textwidth. (default)
" c: Auto-wrap comments; insert comment leader. (default)
" q: Allow formatting of comments with "gq". (default)
" r: Insert comment leader after hitting <Enter>.
" o: Insert comment leader after hitting 'o' or 'O' in command mode.
" n: Auto-format lists, wrapping to text *after* the list bullet char.
" l: Don't auto-wrap if a line is already longer than textwidth.
set formatoptions+=ronl
" Enable mouse scrolling in selected modes
" a: All
" c: Command
" i: Insert
" n: Normal
" v: Visual
set mouse=a
" Set scrolling to be single-line
"map <MouseDown> <C-Y>
"map <S-MouseDown> <C-U>
"map <MouseUp> <C-E>
"map <S-MouseUp> <C-D>
" Highlighting
syntax enable
set t_Co=16
colorscheme solarized
" Configuration variables
let loaded_matchparen=0 " do automatic bracket highlighting.
let mapleader="," " Use , instead of \ for the map leader.
"""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""
"""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""
" Command mode customization
"""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""
" Make y behave like all other capitals
map Y y$
" Make Q reformat text.
noremap Q gq
" Toggle paste mode.
noremap <Leader>p :set paste!<CR>
" Open the file under the cursor in a new tab.
noremap <Leader>ot <C-W>gf
" Toggle highlighting of the last search.
noremap <Leader>h :set hlsearch! hlsearch?<CR>
" Open a scratch buffer.
noremap <Leader>s :Scratch<CR>
" Improve movement on wrapped lines
nnoremap j gj
nnoremap k gk
" Keep search pattern at the center of the screen
nnoremap <silent> n nzz
nnoremap <silent> N Nzz
nnoremap <silent> * *zz
nnoremap <silent> # #zz
nnoremap <silent> g* g*zz
nnoremap <silent> g# g#zz
" Use C-hjkl in to change windows
nnoremap <C-h> <C-w><Left>
nnoremap <C-j> <C-w><Down>
nnoremap <C-k> <C-w><Up>
nnoremap <C-l> <C-w><Right>
" Strip trailing whitespace
nnoremap <silent> <leader>W :call <SID>StripTrailingWhitespaces()<CR>
" Allow easy toggling of spaces / tabs mode
nnoremap <C-t><C-t> :set invexpandtab<CR>
" Create simple toggles for line numbers, paste mode, and word wrap.
nnoremap <C-N><C-N> :set invnumber<CR>
nnoremap <C-p><C-p> :set invpaste<CR>
nnoremap <C-w><C-w> :set invwrap<CR>
" Folding stuff
nnoremap <C-o> zo
nnoremap <C-c> zc
nnoremap <C-O> zO
nnoremap <C-O><C-O> zR
set foldmethod=indent
" Open file for class name under cursor
nnoremap <C-i> yiw:find <C-R>".php<CR>
"""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""
"""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""
" Insert mode customization
"""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""
" Set up dictionary completion.
set dictionary+=~/.vim/dictionary/english-freq
set complete+=k
" Smash Esc
inoremap jk <Esc>
inoremap kj <Esc>
" Use hjkl in insert mode
imap <C-h> <Left>
imap <C-j> <Down>
imap <C-k> <Up>
imap <C-l> <Right>
" Make C-s write the buffer and return to insert mode when applicable
inoremap <C-s> <C-O>:w<CR>
nnoremap <C-s> :w<CR>
" auto-insert second braces and parynthesis
inoremap {<CR> {<CR>}<Esc>O
inoremap ({<CR> ({<CR>});<Esc>O
inoremap <<<<CR> <<<EOT<CR>EOT;<Esc>O<C-TAB><C-TAB><C-TAB>
set cpoptions+=$ "show dollar sign at end of text to be changed
"""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""
"""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""
" Visual mode customization
"""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""
" reselect visual block after indent/outdent
xnoremap < <gv
xnoremap > >gvo
"""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""
そして、次のプラグインが私のbundleディレクトリ（https://github.com/chpatton013/dotfiles/tree/master/vim/.vim/bundle）のコンテンツを構成しています。
neocomplcache/
syntastic/
vim-abolish/
vim-colors-solarized/
vim-commentary/
vim-easymotion/
vim-fugitive/
vim-pathogen/
vim-repeat/
vim-surround/
最後に、すべてのプラグインを無効にしましたが、問題は解決しませんでした。私は自分を削除.vimrcし、問題は解決しました（したがって、それは私の制御の及ばないグローバル設定ではありません）。でいくつかの個別の設定を無効に.vimrcしましたが、問題を解決できなかったようです。結局、私はモグラたたきをするのに飽きて、コミュニティに目を向けることに決めました。何か案は？
編集：例として、
コマンドを使用します:%s/foo/foobar/g
テキストfoo bar fooはに変換されますfoobar bar foo
編集：pb2qによって解決されました。set gdefaultの動作を反転します/g。