ERE（拡張正規表現）は、POSIXの（サプライズ）正規表現またはMacOSXのので説明されていman re_formatます。\dEREは、数字を意味するためにPCREスタイルの表記を使用しません。
[0-9]どちらかを使用するか、[[:digit:]]数字を意味する必要があります。
$ echo "foo bar 2011-03-17 17:31:47 foo bar" |
> sed -E 's/[0-9]{4}-[0-9]{2}-[0-9]{2} [0-9]{2}:[0-9]{2}:[0-9]{2}/FOUND/g'
foo bar FOUND foo bar
$ echo "foo bar 2011-03-17 17:31:47 foo bar" |
> sed -E 's/[[:digit:]]{4}-[[:digit:]]{2}-[[:digit:]]{2} [[:digit:]]{2}:[[:digit:]]{2}:[[:digit:]]{2}/FOUND/g'
foo bar FOUND foo bar
$
\ dはどうですか？
私のMacOSX（10.7.4）では、数字の一致man re_formatについては何も言われていません。\d
RE_FORMAT(7) BSD Miscellaneous Information Manual RE_FORMAT(7)
NAME
re_format -- POSIX 1003.2 regular expressions
DESCRIPTION
Regular expressions (``REs''), as defined in IEEE Std 1003.2
(``POSIX.2''), come in two forms: modern REs (roughly those of egrep(1);
1003.2 calls these ``extended'' REs) and obsolete REs (roughly those of
ed(1); 1003.2 ``basic'' REs). Obsolete REs mostly exist for backward
compatibility in some old programs; they will be discussed at the end.
IEEE Std 1003.2 (``POSIX.2'') leaves some aspects of RE syntax and seman-
tics open; `=' marks decisions on these aspects that may not be fully
portable to other IEEE Std 1003.2 (``POSIX.2'') implementations.
A (modern) RE is one= or more non-empty= branches, separated by `|'. It
matches anything that matches one of the branches.
A branch is one= or more pieces, concatenated. It matches a match for
the first, followed by a match for the second, etc.
A piece is an atom possibly followed by a single= `*', `+', `?', or
bound. An atom followed by `*' matches a sequence of 0 or more matches
of the atom. An atom followed by `+' matches a sequence of 1 or more
matches of the atom. An atom followed by `?' matches a sequence of 0 or
1 matches of the atom.
A bound is `{' followed by an unsigned decimal integer, possibly followed
by `,' possibly followed by another unsigned decimal integer, always fol-
lowed by `}'. The integers must lie between 0 and RE_DUP_MAX (255=)
inclusive, and if there are two of them, the first may not exceed the
second. An atom followed by a bound containing one integer i and no
comma matches a sequence of exactly i matches of the atom. An atom fol-
lowed by a bound containing one integer i and a comma matches a sequence
of i or more matches of the atom. An atom followed by a bound containing
two integers i and j matches a sequence of i through j (inclusive)
matches of the atom.
An atom is a regular expression enclosed in `()' (matching a match for
the regular expression), an empty set of `()' (matching the null
string)=, a bracket expression (see below), `.' (matching any single
character), `^' (matching the null string at the beginning of a line),
`$' (matching the null string at the end of a line), a `\' followed by
one of the characters `^.[$()|*+?{\' (matching that character taken as an
ordinary character), a `\' followed by any other character= (matching
that character taken as an ordinary character, as if the `\' had not been
present=), or a single character with no other significance (matching
that character). A `{' followed by a character other than a digit is an
ordinary character, not the beginning of a bound=. It is illegal to end
an RE with `\'.
A bracket expression is a list of characters enclosed in `[]'. It nor-
mally matches any single character from the list (but see below). If the
list begins with `^', it matches any single character (but see below) not
from the rest of the list. If two characters in the list are separated
by `-', this is shorthand for the full range of characters between those
two (inclusive) in the collating sequence, e.g. `[0-9]' in ASCII matches
any decimal digit. It is illegal= for two ranges to share an endpoint,
e.g. `a-c-e'. Ranges are very collating-sequence-dependent, and portable
programs should avoid relying on them.
To include a literal `]' in the list, make it the first character (fol-
lowing a possible `^'). To include a literal `-', make it the first or
last character, or the second endpoint of a range. To use a literal `-'
as the first endpoint of a range, enclose it in `[.' and `.]' to make it
a collating element (see below). With the exception of these and some
combinations using `[' (see next paragraphs), all other special charac-
ters, including `\', lose their special significance within a bracket
expression.
Within a bracket expression, a collating element (a character, a multi-
character sequence that collates as if it were a single character, or a
collating-sequence name for either) enclosed in `[.' and `.]' stands for
the sequence of characters of that collating element. The sequence is a
single element of the bracket expression's list. A bracket expression
containing a multi-character collating element can thus match more than
one character, e.g. if the collating sequence includes a `ch' collating
element, then the RE `[[.ch.]]*c' matches the first five characters of
`chchcc'.
Within a bracket expression, a collating element enclosed in `[=' and
`=]' is an equivalence class, standing for the sequences of characters of
all collating elements equivalent to that one, including itself. (If
there are no other equivalent collating elements, the treatment is as if
the enclosing delimiters were `[.' and `.]'.) For example, if `x' and
`y' are the members of an equivalence class, then `[[=x=]]', `[[=y=]]',
and `[xy]' are all synonymous. An equivalence class may not= be an end-
point of a range.
Within a bracket expression, the name of a character class enclosed in
`[:' and `:]' stands for the list of all characters belonging to that
class. Standard character class names are:
alnum digit punct
alpha graph space
blank lower upper
cntrl print xdigit
These stand for the character classes defined in ctype(3). A locale may
provide others. A character class may not be used as an endpoint of a
range.
A bracketed expression like `[[:class:]]' can be used to match a single
character that belongs to a character class. The reverse, matching any
character that does not belong to a specific class, the negation operator
of bracket expressions may be used: `[^[:class:]]'.
There are two special cases= of bracket expressions: the bracket expres-
sions `[[:<:]]' and `[[:>:]]' match the null string at the beginning and
end of a word respectively. A word is defined as a sequence of word
characters which is neither preceded nor followed by word characters. A
word character is an alnum character (as defined by ctype(3)) or an
underscore. This is an extension, compatible with but not specified by
IEEE Std 1003.2 (``POSIX.2''), and should be used with caution in soft-
ware intended to be portable to other systems.
In the event that an RE could match more than one substring of a given
string, the RE matches the one starting earliest in the string. If the
RE could match more than one substring starting at that point, it matches
the longest. Subexpressions also match the longest possible substrings,
subject to the constraint that the whole match be as long as possible,
with subexpressions starting earlier in the RE taking priority over ones
starting later. Note that higher-level subexpressions thus take priority
over their lower-level component subexpressions.
Match lengths are measured in characters, not collating elements. A null
string is considered longer than no match at all. For example, `bb*'
matches the three middle characters of `abbbc',
`(wee|week)(knights|nights)' matches all ten characters of `weeknights',
when `(.*).*' is matched against `abc' the parenthesized subexpression
matches all three characters, and when `(a*)*' is matched against `bc'
both the whole RE and the parenthesized subexpression match the null
string.
If case-independent matching is specified, the effect is much as if all
case distinctions had vanished from the alphabet. When an alphabetic
that exists in multiple cases appears as an ordinary character outside a
bracket expression, it is effectively transformed into a bracket expres-
sion containing both cases, e.g. `x' becomes `[xX]'. When it appears
inside a bracket expression, all case counterparts of it are added to the
bracket expression, so that (e.g.) `[x]' becomes `[xX]' and `[^x]'
becomes `[^xX]'.
No particular limit is imposed on the length of REs=. Programs intended
to be portable should not employ REs longer than 256 bytes, as an imple-
mentation can refuse to accept such REs and remain POSIX-compliant.
Obsolete (``basic'') regular expressions differ in several respects. `|'
is an ordinary character and there is no equivalent for its functional-
ity. `+' and `?' are ordinary characters, and their functionality can be
expressed using bounds (`{1,}' or `{0,1}' respectively). Also note that
`x+' in modern REs is equivalent to `xx*'. The delimiters for bounds are
`\{' and `\}', with `{' and `}' by themselves ordinary characters. The
parentheses for nested subexpressions are `\(' and `\)', with `(' and `)'
by themselves ordinary characters. `^' is an ordinary character except
at the beginning of the RE or= the beginning of a parenthesized subex-
pression, `$' is an ordinary character except at the end of the RE or=
the end of a parenthesized subexpression, and `*' is an ordinary charac-
ter if it appears at the beginning of the RE or the beginning of a paren-
thesized subexpression (after a possible leading `^'). Finally, there is
one new type of atom, a back reference: `\' followed by a non-zero deci-
mal digit d matches the same sequence of characters matched by the dth
parenthesized subexpression (numbering subexpressions by the positions of
their opening parentheses, left to right), so that (e.g.) `\([bc]\)\1'
matches `bb' or `cc' but not `bc'.
SEE ALSO
regex(3)
Regular Expression Notation, IEEE Std, 1003.2, section 2.8.
BUGS
Having two kinds of REs is a botch.
The current IEEE Std 1003.2 (``POSIX.2'') spec says that `)' is an ordi-
nary character in the absence of an unmatched `('; this was an uninten-
tional result of a wording error, and change is likely. Avoid relying on
it.
Back references are a dreadful botch, posing major problems for efficient
implementations. They are also somewhat vaguely defined (does
`a\(\(b\)*\2\)*d' match `abbbd'?). Avoid using them.
IEEE Std 1003.2 (``POSIX.2'') specification of case-independent matching
is vague. The ``one case implies all cases'' definition given above is
current consensus among implementors as to the right interpretation.
The syntax for word boundaries is incredibly ugly.
BSD March 20, 1994 BSD