-1

DHCP サーバーから PIC 18F4520 デバイスへの IP アドレスを取得したいのですが、mikroc SPI イーサネット ライブラリを使用して PIC をプログラムしました。コードを作成しましたが、機能しません。IPアドレスを取得してLCDに表示したいのですが、どうすればいいですか？

#include  "__EthEnc28j60.h"
#include  "__EthEnc28j60Private.h"


// LCD module connections
sbit LCD_RS at LATB4_bit;
sbit LCD_EN at LATB5_bit;
sbit LCD_D4 at LATB0_bit;
sbit LCD_D5 at LATB1_bit;
sbit LCD_D6 at LATB2_bit;
sbit LCD_D7 at LATB3_bit;

sbit LCD_RS_Direction at TRISB4_bit;
sbit LCD_EN_Direction at TRISB5_bit;
sbit LCD_D4_Direction at TRISB0_bit;
sbit LCD_D5_Direction at TRISB1_bit;
sbit LCD_D6_Direction at TRISB2_bit;
sbit LCD_D7_Direction at TRISB3_bit;
// End LCD module connections

/*// SD module connections
sbit Mmc_Chip_Select           at LATC0_bit;  // for writing to output pin always use latch 

(PIC18 family)
sbit Mmc_Chip_Select_Direction at TRISC0_bit;
// End SD module connections*/

//ENC28j60 connection
sbit SPI_Ethernet_CS at LATC1_bit;
sbit SPI_Ethernet_Rst at LATC0_bit;

sbit SPI_Ethernet_CS_Direction at TRISC1_bit;
sbit SPI_Ethernet_Rst_Direction at TRISC0_bit;
//End ENC28j60 connection

const char httpHeader[] = "HTTP/1.1 200 OK\nContent-type: "; // HTTP header
const char httpMimeTypeHTML[] = "text/html\n\n";             // HTML MIME type
const char httpMimeTypeScript[] = "text/plain\n\n";          // TEXT MIME type

// default html page
char    indexPage[] =
"<html><head><title>mikroElektronika</title></head><body>\
<h3 align=center>MikroElektronika Home Automatization System</h3>\
<form name=\"input\" action=\"/\" method=\"get\">\
<table align=center width=200 bgcolor=#4974E2 border=2><tr>\
<td align=center colspan=2><font size=4 color=white><b>Heat Control</b></font>\
</td></tr><tr><td align=center bgcolor=#4974E2><input name=\"tst1\" width=60 \
type=\"submit\" value=\"ON\"></td><td align=center bgcolor=#FFFF00>\
<input name=\"tst2\" type=\"submit\" value=\"OFF\"></td></tr></table>\
</form></body></html>";

// network parameters
char   myMacAddr[6] = {0x00, 0x14, 0xA5, 0x76, 0x19, 0x3f}; // my MAC address
char   myIpAddr[4]  = {0, 0, 0, 0};                         // my IP address


unsigned char   getRequest[20];                                    // HTTP request buffer

unsigned int  SPI_Ethernet_UserTCP(unsigned char *remoteHost, unsigned int remotePort, 

unsigned int localPort, unsigned int reqLength, TEthPktFlags *flags)
{
  unsigned int    len;                            // my reply length
  if(localPort != 80) return(0);             // I listen only to web request on port 80

  // get 10 first bytes only of the request, the rest does not matter here
  for(len = 0 ; len < 15 ; len++) getRequest[len] = SPI_Ethernet_getByte();
  getRequest[len] = 0;

  if(memcmp(getRequest, "GET /", 5)) return(0);  // only GET method

  if(!memcmp(getRequest+11, "ON", 2))        // do we have ON command
    PORTB.F0 = 1;                // set PORTB bit0
  else
    if(!memcmp(getRequest+11, "OFF", 3))        // do we have OFF command
      PORTB.F0 = 0;        // clear PORTB bit0

  if (PORTB.F0)
    {
     memcpy(indexPage+340, "#FFFF00", 6);        // highlight (yellow) ON
     memcpy(indexPage+431, "#4974E2", 6);        // clear OFF
    }
  else
    {
     memcpy(indexPage+340, "#4974E2", 6);        // clear ON
     memcpy(indexPage+431, "#FFFF00", 6);        // highlight (yellow) OFF
    }

  len =  SPI_Ethernet_putConstString(httpHeader);               // HTTP header
  len += SPI_Ethernet_putConstString(httpMimeTypeHTML);  // with HTML MIME type
  len += SPI_Ethernet_putString(indexPage);                           // HTML page first part
  return len; // return to the library with the number of bytes to transmit
}
unsigned int  SPI_Ethernet_UserUDP(unsigned char *remoteHost, unsigned int remotePort, 

unsigned int destPort, unsigned int reqLength, TEthPktFlags *flags)

{
  return 0; // back to the library with the length of the UDP reply
}


unsigned long  i, size, j, k;
char           filename[14] = "ASHAN.TXT";          // File names
int txt2,*pi;
unsigned short character[20];
unsigned short *contentBuffer;



void main(){

ADCON1 |= 0x0D;             // Configure AN0 and AN1 pins as analog
CMCON  |= 7;                // coparators off

TRISA = 0xff ;
PORTA = 0 ;

PORTB = 0 ;  //PORTB output
TRISB = 0 ;

PORTC = 0 ;
TRISC = 0b11011100 ;    // set PORTC as input except for bits 0 (RESET) and 1 (CS)

Delay_ms(100);

//Initialize LCD
Lcd_Init();
Lcd_Cmd(_LCD_CLEAR);
Lcd_Cmd(_LCD_CURSOR_OFF );
Lcd_Out(1, 1, "Status:");
Lcd_Cmd(_LCD_SECOND_ROW);

SPI1_Init();
SPI_Ethernet_Init(myMacAddr, myIpAddr,1);

SPI_Ethernet_initDHCP(5); // get network configuration from DHCP server, wait 5 sec   for the response
memcpy(myIpAddr, Spi_Ethernet_getIpAddress(),4) ; // get assigned IP address
Lcd_Out_Cp(myIpAddr);



}
4

1 に答える 1

0

まず、Wireshark を実行して、DHCP ディスカバリがネットワークにヒットするかどうかを確認します。その時点から、トラブルシューティングをどこに集中させる必要があるかを決定します...

于 2012-08-30T15:59:53.247 に答える