2

組み込み ARM プラットフォームで実行されるソフトウェアに取り組んでいます。プラットフォームを更新する過程で、OpenEmbedded ベースのシステムから Linaro に切り替えています。

私のマシンでは、OpenEmbedded が構築した 32 ビット gcc 4.6.4 を使用して、ARM 用にソフトウェアをクロスコンパイルするのに現在約 9 分かかります。新しいシステムでは、もちろん、Linaro の gcc 4.7 バイナリを試しています。驚くべきことに、コンパイルに約 2 倍の時間がかかりました (18 分)。Linaro gcc 4.6 バイナリにも同じ問題があるため、gcc バージョン固有ではありません。

Linaro の crosstool-ng を使用してコンパイラの調整済みバージョンを作成しても (たとえば、configure オプションをできるだけ近づけようとしても)、速度は向上しませんでした。

古い gcc コンパイラと Linaro の主な違い:

  • 古いものはsoftfpを使用し、Linaroハードはfpuを指定します
  • 古いものは特定の ARM プロセッサ/アーキテクチャ (arm-none-linux-gnueabi) をターゲットにしておらず、Linaro の gcc (arm-linux-gnueabihf) は明示的に設定されwith-target=armv7-aていますwith-tune=cortex-a9

ssp の有効化、thumb/arm モード、multilib の使用、ターゲット CPU (cortex-a8 と a9) など、gcc で設定オプションを変更しても改善されません。

main 関数にvector<int>.

他に何を微調整するかについてのアイデアが不足しています。誰かアイデアがありますか?


EDIT4: Ubuntu 12.04 (gcc バージョン 4.6.3 (Ubuntu/Linaro 4.6.3-1ubuntu5)) のアーム クロス コンパイラも試してみましたが、コンパイル時間は 4.6.4 バージョンと同等です。だから、Linaro のバージョンには何か特別な違いがあるように見えます。


EDIT3: -ftime-reportプロジェクトの実際のソースファイルのLinaro gcc 4.7から:

Execution times (seconds)
 phase setup             :   0.00 ( 0%) usr   0.00 ( 0%) sys   0.02 ( 1%) wall    2076 kB ( 2%) ggc
 phase parsing           :   1.72 (74%) usr   0.34 (85%) sys   2.04 (75%) wall   66732 kB (79%) ggc
 phase lang. deferred    :   0.28 (12%) usr   0.04 (10%) sys   0.33 (12%) wall   10215 kB (12%) ggc
 phase cgraph            :   0.32 (14%) usr   0.02 ( 5%) sys   0.33 (12%) wall    5481 kB ( 6%) ggc
 phase generate          :   0.60 (26%) usr   0.06 (15%) sys   0.66 (24%) wall   15700 kB (19%) ggc
 |name lookup            :   0.28 (12%) usr   0.02 ( 5%) sys   0.24 ( 9%) wall    8058 kB (10%) ggc
 |overload resolution    :   0.32 (14%) usr   0.06 (15%) sys   0.36 (13%) wall   10042 kB (12%) ggc
 callgraph construction  :   0.06 ( 3%) usr   0.00 ( 0%) sys   0.02 ( 1%) wall     551 kB ( 1%) ggc
 callgraph optimization  :   0.02 ( 1%) usr   0.00 ( 0%) sys   0.01 ( 0%) wall     224 kB ( 0%) ggc
 varpool construction    :   0.00 ( 0%) usr   0.00 ( 0%) sys   0.01 ( 0%) wall      94 kB ( 0%) ggc
 df scan insns           :   0.06 ( 3%) usr   0.00 ( 0%) sys   0.02 ( 1%) wall       5 kB ( 0%) ggc
 df reg dead/unused notes:   0.00 ( 0%) usr   0.00 ( 0%) sys   0.01 ( 0%) wall      22 kB ( 0%) ggc
 alias analysis          :   0.00 ( 0%) usr   0.02 ( 5%) sys   0.00 ( 0%) wall      11 kB ( 0%) ggc
 preprocessing           :   0.08 ( 3%) usr   0.10 (25%) sys   0.29 (11%) wall    1069 kB ( 1%) ggc
 parser (global)         :   0.58 (25%) usr   0.08 (20%) sys   0.43 (16%) wall   25145 kB (30%) ggc
 parser struct body      :   0.28 (12%) usr   0.02 ( 5%) sys   0.34 (12%) wall   12400 kB (15%) ggc
 parser enumerator list  :   0.00 ( 0%) usr   0.00 ( 0%) sys   0.01 ( 0%) wall     121 kB ( 0%) ggc
 parser function body    :   0.14 ( 6%) usr   0.00 ( 0%) sys   0.15 ( 6%) wall    2435 kB ( 3%) ggc
 parser inl. func. body  :   0.10 ( 4%) usr   0.02 ( 5%) sys   0.18 ( 7%) wall    3682 kB ( 4%) ggc
 parser inl. meth. body  :   0.24 (10%) usr   0.02 ( 5%) sys   0.20 ( 7%) wall    5298 kB ( 6%) ggc
 template instantiation  :   0.58 (25%) usr   0.14 (35%) sys   0.75 (28%) wall   26588 kB (31%) ggc
 tree gimplify           :   0.02 ( 1%) usr   0.00 ( 0%) sys   0.03 ( 1%) wall     785 kB ( 1%) ggc
 tree CFG construction   :   0.00 ( 0%) usr   0.00 ( 0%) sys   0.01 ( 0%) wall     543 kB ( 1%) ggc
 tree SSA other          :   0.00 ( 0%) usr   0.00 ( 0%) sys   0.02 ( 1%) wall      32 kB ( 0%) ggc
 out of ssa              :   0.00 ( 0%) usr   0.00 ( 0%) sys   0.01 ( 0%) wall       0 kB ( 0%) ggc
 expand                  :   0.00 ( 0%) usr   0.00 ( 0%) sys   0.01 ( 0%) wall     438 kB ( 1%) ggc
 varconst                :   0.00 ( 0%) usr   0.00 ( 0%) sys   0.01 ( 0%) wall       6 kB ( 0%) ggc
 integrated RA           :   0.04 ( 2%) usr   0.00 ( 0%) sys   0.09 ( 3%) wall    1313 kB ( 2%) ggc
 reload                  :   0.06 ( 3%) usr   0.00 ( 0%) sys   0.02 ( 1%) wall      60 kB ( 0%) ggc
 thread pro- & epilogue  :   0.00 ( 0%) usr   0.00 ( 0%) sys   0.02 ( 1%) wall      92 kB ( 0%) ggc
 final                   :   0.02 ( 1%) usr   0.00 ( 0%) sys   0.02 ( 1%) wall       4 kB ( 0%) ggc
 rest of compilation     :   0.02 ( 1%) usr   0.00 ( 0%) sys   0.02 ( 1%) wall     133 kB ( 0%) ggc
 unaccounted todo        :   0.02 ( 1%) usr   0.00 ( 0%) sys   0.01 ( 0%) wall       0 kB ( 0%) ggc
 TOTAL                 :   2.32             0.40             2.72              84519 kB

私のgcc-4.6でも同じです:

Execution times (seconds)
 callgraph construction:   0.00 ( 0%) usr   0.00 ( 0%) sys   0.02 ( 1%) wall     527 kB ( 1%) ggc
 trivially dead code   :   0.00 ( 0%) usr   0.00 ( 0%) sys   0.01 ( 1%) wall       0 kB ( 0%) ggc
 df scan insns         :   0.02 ( 2%) usr   0.00 ( 0%) sys   0.01 ( 1%) wall       5 kB ( 0%) ggc
 df reg dead/unused notes:   0.00 ( 0%) usr   0.00 ( 0%) sys   0.01 ( 1%) wall      22 kB ( 0%) ggc
 preprocessing         :   0.08 ( 7%) usr   0.10 (26%) sys   0.14 ( 9%) wall    1016 kB ( 1%) ggc
 parser                :   0.68 (58%) usr   0.24 (63%) sys   0.83 (52%) wall   52215 kB (76%) ggc
 name lookup           :   0.28 (24%) usr   0.02 ( 5%) sys   0.41 (26%) wall   10211 kB (15%) ggc
 inline heuristics     :   0.00 ( 0%) usr   0.02 ( 5%) sys   0.00 ( 0%) wall       0 kB ( 0%) ggc
 tree gimplify         :   0.00 ( 0%) usr   0.00 ( 0%) sys   0.01 ( 1%) wall     637 kB ( 1%) ggc
 tree CFG construction :   0.02 ( 2%) usr   0.00 ( 0%) sys   0.00 ( 0%) wall     463 kB ( 1%) ggc
 expand                :   0.02 ( 2%) usr   0.00 ( 0%) sys   0.01 ( 1%) wall     426 kB ( 1%) ggc
 varconst              :   0.00 ( 0%) usr   0.00 ( 0%) sys   0.02 ( 1%) wall     132 kB ( 0%) ggc
 integrated RA         :   0.02 ( 2%) usr   0.00 ( 0%) sys   0.03 ( 2%) wall     304 kB ( 0%) ggc
 reload                :   0.00 ( 0%) usr   0.00 ( 0%) sys   0.01 ( 1%) wall      58 kB ( 0%) ggc
 machine dep reorg     :   0.02 ( 2%) usr   0.00 ( 0%) sys   0.00 ( 0%) wall       3 kB ( 0%) ggc
 final                 :   0.00 ( 0%) usr   0.00 ( 0%) sys   0.02 ( 1%) wall       4 kB ( 0%) ggc
 rest of compilation   :   0.02 ( 2%) usr   0.00 ( 0%) sys   0.01 ( 1%) wall     133 kB ( 0%) ggc
 unaccounted todo      :   0.02 ( 2%) usr   0.00 ( 0%) sys   0.03 ( 2%) wall       0 kB ( 0%) ggc
 TOTAL                 :   1.18             0.38             1.59              68315 kB

EDIT2:-ftime-report非常に単純な test.cpp に対するLinaro gcc 4.6.3 の出力 ( options を含む-fno-graphite-identity -fno-graphite):

Execution times (seconds)
 preprocessing         :   0.00 ( 0%) usr   0.02 (50%) sys   0.02 (10%) wall     121 kB ( 2%) ggc
 parser                :   0.10 (62%) usr   0.02 (50%) sys   0.11 (55%) wall    4022 kB (65%) ggc
 name lookup           :   0.02 (12%) usr   0.00 ( 0%) sys   0.04 (20%) wall     879 kB (14%) ggc
 tree gimplify         :   0.02 (13%) usr   0.00 ( 0%) sys   0.00 ( 0%) wall      20 kB ( 0%) ggc
 expand                :   0.00 ( 0%) usr   0.00 ( 0%) sys   0.01 ( 5%) wall      34 kB ( 1%) ggc
 integrated RA         :   0.02 (12%) usr   0.00 ( 0%) sys   0.01 ( 5%) wall      59 kB ( 1%) ggc
 TOTAL                 :   0.16             0.04             0.20               6207 kB

私の古いgcc 4.6.4と同じファイルの場合:

Execution times (seconds)
 preprocessing         :   0.02 (25%) usr   0.00 ( 0%) sys   0.02 (14%) wall     119 kB ( 2%) ggc
 parser                :   0.00 ( 0%) usr   0.04 (100%) sys   0.06 (43%) wall    4021 kB (65%) ggc
 name lookup           :   0.04 (50%) usr   0.00 ( 0%) sys   0.03 (21%) wall     879 kB (14%) ggc
 expand                :   0.02 (25%) usr   0.00 ( 0%) sys   0.01 ( 7%) wall      34 kB ( 1%) ggc
 unaccounted todo      :   0.00 ( 0%) usr   0.00 ( 0%) sys   0.01 ( 7%) wall       0 kB ( 0%) ggc
 TOTAL                 :   0.08             0.04             0.14               6204 kB

両方のコンパイラで前処理されたファイルを生成しても、大きな違いはありませんでした (Linaro の gcc の出力は 3 行だけ長くなりました)。


EDIT1:古いもののgcc -v(パスが短縮または削除されました(例:-sbindir)

# arm-none-linux-gnueabi-g++ -v
Using built-in specs.
COLLECT_GCC=..sysroots/i686-linux/usr/bin/arm-none-linux-gnueabi-g++
COLLECT_LTO_WRAPPER=../libexec/gcc/arm-none-linux-gnueabi/4.6.4/lto-wrapper
Target: arm-none-linux-gnueabi
Configured with: ..tmp/work/armv7a-none-linux-gnueabi/gcc-cross-4.6.3+svnr184847-r27/gcc-4_6-branch/configure --build=i686-linux --host=i686-linux --target=arm-none-linux-gnueabi  --with-gnu-ld --enable-shared --enable-languages=c,c++ --enable-threads=posix --disable-multilib --enable-c99 --enable-long-long --enable-symvers=gnu --enable-libstdcxx-pch --program-prefix=arm-none-linux-gnueabi- --without-local-prefix --enable-lto --enable-libssp --disable-bootstrap --disable-libgomp --disable-libmudflap --with-system-zlib --with-linker-hash-style=gnu --with-ppl=no --with-cloog=no --enable-cheaders=c_global --enable-languages=c,c++,fortran --disable-libunwind-exceptions --with-mpfr=..sysroots/i686-linux/usr --with-system-zlib --enable-__cxa_atexit
Thread model: posix
gcc version 4.6.4 20120303 (prerelease) (GCC) 

およびリナロ gcc -v

# arm-linux-gnueabihf-g++ -v
Using built-in specs.
COLLECT_GCC=..compiler/bin/arm-linux-gnueabihf-g++
COLLECT_LTO_WRAPPER=../libexec/gcc/arm-linux-gnueabihf/4.7.2/lto-wrapper
Target: arm-linux-gnueabihf
Configured with: .build/src/gcc-linaro-4.7-2012.08/configure --build=i686-build_pc-linux-gnu --host=i686-build_pc-linux-gnu --target=arm-linux-gnueabihf --enable-languages=c,c++,fortran --enable-multilib --with-arch=armv7-a --with-tune=cortex-a9 --with-fpu=vfpv3-d16 --with-float=hard --with-pkgversion='crosstool-NG linaro-1.13.1-2012.08-20120827 - Linaro GCC 2012.08' --with-bugurl=https://bugs.launchpad.net/gcc-linaro --enable-__cxa_atexit --enable-libmudflap --enable-libgomp --enable-libssp --with-gmp=.. --with-mpfr=.. --with-mpc=.. --with-ppl=.. --with-cloog=.. --with-libelf=.. --with-host-libstdcxx='-L.. -lpwl' --enable-threads=posix --disable-libstdcxx-pch --enable-linker-build-id --enable-gold --with-local-prefix=.. --enable-c99 --enable-long-long --with-mode=thumb
Thread model: posix
gcc version 4.7.2 20120731 (prerelease) (crosstool-NG linaro-1.13.1-2012.08-20120827 - Linaro GCC 2012.08) 

後者については、--disable-multilib --disable-libmudflap --disable-libgomp --disable-multilib を持つように調整も行いました。

Ubuntu 12.04 のアーム コンパイラは次のとおりです。

> arm-linux-gnueabihf-g++-4.6 -v
Using built-in specs.
COLLECT_GCC=arm-linux-gnueabihf-g++-4.6
COLLECT_LTO_WRAPPER=/usr/lib/gcc/arm-linux-gnueabihf/4.6/lto-wrapper
Target: arm-linux-gnueabihf
Configured with: ../src/configure -v --with-pkgversion='Ubuntu/Linaro 4.6.3-1ubuntu5'  --enable-languages=c,c++,fortran,objc,obj-c++ --prefix=/usr --program-suffix=-4.6 --enable-shared --enable-linker-build-id --with-system-zlib --libexecdir=/usr/lib --without-included-gettext --enable-threads=posix --with-gxx-include-dir=/usr/arm-linux-gnueabihf/include/c++/4.6.3 --libdir=/usr/lib --enable-nls --enable-clocale=gnu --enable-libstdcxx-debug --enable-libstdcxx-time=yes --enable-gnu-unique-object --enable-plugin --enable-objc-gc --enable-multilib --disable-sjlj-exceptions --with-arch=armv7-a --with-float=hard --with-fpu=vfpv3-d16 --with-mode=thumb --disable-werror --enable-checking=release --build=x86_64-linux-gnu --host=x86_64-linux-gnu --target=arm-linux-gnueabihf 
4

2 に答える 2

1

-timeor-ftime-reportをコンパイラに渡して、コンパイル時間がかかるgcc理由と場所を調べることができます。gcc

しかし、なぜコンパイル時間がそれほど重要なのでしょうか?

生成された実行可能バイナリの実行時間に注意する必要があります。

-vまた、渡されたオプションの出力を見せてくださいgcc

-jまた、オプションをmakeコマンドに渡して、並行して動作させることもできます (たとえば、いくつかgccを並行して実行するなど)。-O3から-O2 またはへなど、最適化レベルを下げることもできます。-O1

于 2012-09-15T06:15:37.070 に答える
0

OK - あなた -ftime-report テストは、「パーサー」が犯人であることを明確に示しています。テンプレート (一般的に) と STL (特に) が根本的な原因であると推測しています。

提案:

ツールチェーンで「プリコンパイル済みヘッダー」を使用できる方法があるかどうかを確認してください。可能であれば、問題全体が解消される可能性があります。

リンク (残念ながら、どれがあなたに当てはまるかどうかはわかりません) :

于 2012-09-16T00:13:18.373 に答える