msi 内の単一のファイルを置き換えたい。どうやってするの？
59893 次
6 に答える
50
msi2xmlを使用します。
このコマンドは、MSIファイルを抽出します。
msi2xml -c OutputDir TestMSI.MSI
OutputDirを開き、ファイルを変更します。
MSIの実行を再構築するには：
xml2msi.exe -m TestMSI.xml
MSIファイルが変更されたときに失敗する「MD5チェックサムテスト」を無視するには、-mが必要です。
于 2011-02-24T11:19:06.627 に答える
19
MsiDB.exe ( Windows Installer SDKに付属) を使用して、msi から CAB ファイル ストリームを抽出する必要があります。-x オプションを使用してコマンド ラインから実行し、cab ファイルの名前を指定します。これは、msi データベースのメディア テーブルにリストされています。
または、VSI オプションの「Package Files as:」オプションを「Compresses in Cabinet Files」に指定して、ビルド時に cab ファイルを msi から除外する場合は、この部分をスキップできます (同じディレクトリに作成されます)。 msi として）。
抽出したら、cab フォルダー内の指定されたファイルを変更できます。その名前は壊れているため、ファイル テーブルにあるファイルの msi 名を見つけて、新しいファイルの名前をそれに変更する必要があります。
完了したら、 -a オプションを使用して MsiDB ユーティリティで元に戻すことができます。
-a で追加する前に、msidb -kを使用して MSI から cabを削除する必要があります。
于 2008-09-24T11:31:47.443 に答える
3
http://www.instedit.com/にあるインストーラー エディター、InstEd を試してみてください。30日間の試用版があり、私にとってはうまくいきます. ファイルをフォルダーに抽出し、cab を編集して再構築し、MSI を保存します。ファイルの編集以外はすべて GUI で行います。
素晴らしいプログラムではありませんが、MSI でファイルをすばやく編集できるようにするために 30 ドルを支払いました。
私は InstEd や、アプリケーションの支払いと使用以外の方法で働いていません。
于 2011-06-09T13:21:56.493 に答える
1
MSI 内のファイルを置き換える非常に単純なサンプル コード。これにより、新しいファイル/CAB が MSI にストリーム バックされませんが、インストールを成功させるには、CAB が MSI と同じディレクトリにある必要があります。もう少し努力すれば、コードを変更して CAB をストリーミングして戻すことができると確信しています。
Const MSI_SOURCE = "application.msi"
Const FILE_REPLACE = "config.xml"
Dim filesys, installer, database, view
Dim objFile, size, result, objCab
Set filesys=CreateObject("Scripting.FileSystemObject")
Set installer = CreateObject("WindowsInstaller.Installer")
Set database = installer.OpenDatabase (MSI_SOURCE, 1)
Set objFile = filesys.GetFile(FILE_REPLACE)
size = objFile.Size
Set objCab = CreateObject("MakeCab.MakeCab.1")
objCab.CreateCab "config.cab", False, False, False
objCab.AddFile FILE_REPLACE, filesys.GetFileName(FILE_REPLACE)
objCab.CloseCab
Set view = database.OpenView ("SELECT LastSequence FROM Media WHERE DiskId = 1")
view.Execute
Set result = view.Fetch
seq = result.StringData(1) + 1 ' Sequence for new configuration file
Set view = database.OpenView ("INSERT INTO Media (DiskId, LastSequence, Cabinet) VALUES ('2', '" & seq & "', 'config.cab')")
view.Execute
Set view = database.OpenView ("UPDATE File SET FileSize = " & size & ", Sequence = " & seq & " WHERE File = '" & LCase(FILE_REPLACE) & "'")
view.Execute
于 2009-02-06T04:24:38.763 に答える
1
このコードは、名前が置き換えられるファイルとまったく同じである 1 つのファイルでのみテストされています。
ただし、DTF（WIXから）を使用して、C＃でChristopher Paintersの回答を実装する必要があります
/**
* this is a bastard class, as it is not really a part of building an installer package,
* however, we need to be able to modify a prebuild package, and add user specific files, post build, to save memory on server, and have a fast execution time.
*
* \author Henrik Dalsager
*/
//I'm using everything...
using System;
using System.IO;
using System.Linq;
using System.Text;
using System.Collections;
using System.Collections.Generic;
using System.Diagnostics.CodeAnalysis;
using System.Globalization;
using System.Text.RegularExpressions;
using Microsoft.Deployment.Compression.Cab;
using Microsoft.Deployment.WindowsInstaller;
using Microsoft.Deployment.WindowsInstaller.Package;
namespace MSIFileManipulator
{
/**
* \brief updates an existing MSI, I.E. add new files
*
*/
class updateMSI
{
//everything revolves around this package..
InstallPackage pkg = null;
//the destruction should close connection with the database, just in case we forgot..
~updateMSI()
{
if (pkg != null)
{
try
{
pkg.Close();
}
catch (Exception ex)
{
//rollback?
//do nothing.. we just don't want to break anything if database was already closed, but not dereffered.
}
}
}
/**
* \brief compresses a list of files, in a workdir, to a cabinet file, in the same workdir.
* \param workdir path to the workdir
* \param filesToArchive a list of filenames, of the files to include in the cabinet file.
* \return filename of the created cab file
*/
public string createCabinetFileForMSI(string workdir, List<string> filesToArchive)
{
//create temporary cabinet file at this path:
string GUID = Guid.NewGuid().ToString();
string cabFile = GUID + ".cab";
string cabFilePath = Path.Combine(workdir, cabFile);
//create a instance of Microsoft.Deployment.Compression.Cab.CabInfo
//which provides file-based operations on the cabinet file
CabInfo cab = new CabInfo(cabFilePath);
//create a list with files and add them to a cab file
//now an argument, but previously this was used as test:
//List<string> filesToArchive = new List<string>() { @"C:\file1", @"C:\file2" };
cab.PackFiles(workdir, filesToArchive, filesToArchive);
//we will ned the path for this file, when adding it to an msi..
return cabFile;
}
/**
* \brief embeds a cabinet file into an MSI into the "stream" table, and adds it as a new media in the media table
* This does not install the files on a clients computer, if he runs the installer,
* as none of the files in the cabinet, is defined in the MSI File Table (that informs msiexec where to place mentioned files.)
* It simply allows cabinet files to piggypack within a package, so that they may be extracted again at clients computer.
*
* \param pathToCabFile full absolute path to the cabinet file
* \return media number of the new cabinet file wihtin the MSI
*/
public int insertCabFileAsNewMediaInMSI(string cabFilePath, int numberOfFilesInCabinet = -1)
{
if (pkg == null)
{
throw new Exception("Cannot insert cabinet file into non-existing MSI package. Please Supply a path to the MSI package");
}
int numberOfFilesToAdd = numberOfFilesInCabinet;
if (numberOfFilesInCabinet < 0)
{
CabInfo cab = new CabInfo(cabFilePath);
numberOfFilesToAdd = cab.GetFiles().Count;
}
//create a cab file record as a stream (embeddable into an MSI)
Record cabRec = new Record(1);
cabRec.SetStream(1, cabFilePath);
/*The Media table describes the set of disks that make up the source media for the installation.
we want to add one, after all the others
DiskId - Determines the sort order for the table. This number must be equal to or greater than 1,
for out new cab file, it must be > than the existing ones...
*/
//the baby SQL service in the MSI does not support "ORDER BY `` DESC" but does support order by..
IList<int> mediaIDs = pkg.ExecuteIntegerQuery("SELECT `DiskId` FROM `Media` ORDER BY `DiskId`");
int lastIndex = mediaIDs.Count - 1;
int DiskId = mediaIDs.ElementAt(lastIndex) + 1;
//wix name conventions of embedded cab files is "#cab" + DiskId + ".cab"
string mediaCabinet = "cab" + DiskId.ToString() + ".cab";
//The _Streams table lists embedded OLE data streams.
//This is a temporary table, created only when referenced by a SQL statement.
string query = "INSERT INTO `_Streams` (`Name`, `Data`) VALUES ('" + mediaCabinet + "', ?)";
pkg.Execute(query, cabRec);
Console.WriteLine(query);
/*LastSequence - File sequence number for the last file for this new media.
The numbers in the LastSequence column specify which of the files in the File table
are found on a particular source disk.
Each source disk contains all files with sequence numbers (as shown in the Sequence column of the File table)
less than or equal to the value in the LastSequence column, and greater than the LastSequence value of the previous disk
(or greater than 0, for the first entry in the Media table).
This number must be non-negative; the maximum limit is 32767 files.
/MSDN
*/
IList<int> sequences = pkg.ExecuteIntegerQuery("SELECT `LastSequence` FROM `Media` ORDER BY `LastSequence`");
lastIndex = sequences.Count - 1;
int LastSequence = sequences.ElementAt(lastIndex) + numberOfFilesToAdd;
query = "INSERT INTO `Media` (`DiskId`, `LastSequence`, `Cabinet`) VALUES (" + DiskId.ToString() + "," + LastSequence.ToString() + ",'#" + mediaCabinet + "')";
Console.WriteLine(query);
pkg.Execute(query);
return DiskId;
}
/**
* \brief embeds a cabinet file into an MSI into the "stream" table, and adds it as a new media in the media table
* This does not install the files on a clients computer, if he runs the installer,
* as none of the files in the cabinet, is defined in the MSI File Table (that informs msiexec where to place mentioned files.)
* It simply allows cabinet files to piggypack within a package, so that they may be extracted again at clients computer.
*
* \param pathToCabFile full absolute path to the cabinet file
* \param pathToMSIFile full absolute path to the msi file
* \return media number of the new cabinet file wihtin the MSI
*/
public int insertCabFileAsNewMediaInMSI(string cabFilePath, string pathToMSIFile, int numberOfFilesInCabinet = -1)
{
//open the MSI package for editing
pkg = new InstallPackage(pathToMSIFile, DatabaseOpenMode.Direct); //have also tried direct, while database was corrupted when writing.
return insertCabFileAsNewMediaInMSI(cabFilePath, numberOfFilesInCabinet);
}
/**
* \brief overloaded method, that embeds a cabinet file into an MSI into the "stream" table, and adds it as a new media in the media table
* This does not install the files on a clients computer, if he runs the installer,
* as none of the files in the cabinet, is defined in the MSI File Table (that informs msiexec where to place mentioned files.)
* It simply allows cabinet files to piggypack within a package, so that they may be extracted again at clients computer.
*
* \param workdir absolute path to the cabinet files location
* \param cabFile is the filename of the cabinet file
* \param pathToMSIFile full absolute path to the msi file
* \return media number of the new cabinet file wihtin the MSI
*/
public int insertCabFileAsNewMediaInMSI(string workdir, string cabFile, string pathToMSIFile, int numberOfFilesInCabinet = -1)
{
string absPathToCabFile = Path.Combine(workdir, cabFile);
string absPathToMSIFile = Path.Combine(workdir, pathToMSIFile);
return insertCabFileAsNewMediaInMSI(absPathToCabFile, absPathToMSIFile, numberOfFilesInCabinet);
}
/**
* \brief reconfigures the MSI, so that a file pointer is "replaced" by a file pointer to another cabinets version of said file...
* The original file will not be removed from the MSI, but simply orphaned (no component refers to it). It will not be installed, but will remain in the package.
*
* \param OriginalFileName (this is the files target name at the clients computer after installation. It is our only way to locate the file in the file table. If two or more files have the same target name, we cannot reorient the pointer to that file!)
* \param FileNameInCabinet (In case you did not have the excact same filename for the new file, as the original file, you can specify the name of the file, as it is known in the cabinet, here.)
* \param DiskIdOfCabinetFile - Very important information. This is the Id of the new cabinet file, it is the only way to know where the new source data is within the MSI cabinet stream. This function extracts the data it needs from there, like sequence numbers
*/
public void PointAPreviouslyConfiguredComponentsFileToBeFetchedFromAnotherCabinet(string OriginalFileName, string FileNameInCabinet, string newFileSizeInBytes, int DiskIdOfCabinetFile)
{
//retrieve the range of sequence numbers for this cabinet file.
string query = "SELECT `DiskId` FROM `Media` ORDER BY `LastSequence`";
Console.WriteLine(query);
IList<int> medias = pkg.ExecuteIntegerQuery("SELECT `DiskId` FROM `Media` ORDER BY `LastSequence`");
query = "SELECT `LastSequence` FROM `Media` ORDER BY `LastSequence`";
Console.WriteLine(query);
IList<int> mediaLastSequences = pkg.ExecuteIntegerQuery("SELECT `LastSequence` FROM `Media` ORDER BY `LastSequence`");
if(medias.Count != mediaLastSequences.Count)
{
throw new Exception("there is something wrong with the Media Table, There is a different number of DiskId and LastSequence rows");
}
if(medias.Count <= 0)
{
throw new Exception("there is something wrong with the Media Table, There are no rows with medias available..");
}
int FirstSequence = -1;
int LastSequence = -1;
int lastIndex = medias.Count - 1;
for (int index = lastIndex; index >= 0; index--)
{
int rowLastSequence = mediaLastSequences.ElementAt(index);
int rowDiskId = medias.ElementAt(index);
if (rowDiskId == DiskIdOfCabinetFile)
{
LastSequence = rowLastSequence;
if (index < lastIndex)
{
//the next cabinet files last sequence number + 1, is this ones first..
FirstSequence = mediaLastSequences.ElementAt(index + 1) + 1;
break;
}
else
{
//all files from the first, to this last sequence number, are found in this cabinet
FirstSequence = mediaLastSequences.ElementAt(lastIndex);
break;
}
}
}
//now we will look in the file table to get a vacant sequence number in the new cabinet (if available - first run will return empty, and thus default to FirstSequence)
int Sequence = FirstSequence;
query = "SELECT `Sequence` FROM `File` WHERE `Sequence` >= " + FirstSequence.ToString() + " AND `Sequence` <= " + LastSequence.ToString() + " ORDER BY `Sequence`";
Console.WriteLine(query);
IList<int> SequencesInRange = pkg.ExecuteIntegerQuery(query);
for (int index = 0; index < SequencesInRange.Count; index++)
{
if (FirstSequence + index != SequencesInRange.ElementAt(index))
{
Sequence = FirstSequence + index;
break;
}
}
//now we set this in the file table, to re-point this file to the new media..
//File.FileName = FileNameInCabinet;
//File.FileSize = newFileSizeInBytes;
//File.Sequence = sequence;
query = "UPDATE `File` SET `File`.`FileName`='" + FileNameInCabinet + "' WHERE `File`='" + OriginalFileName + "'";
Console.WriteLine(query);
pkg.Execute(query);
query = "UPDATE `File` SET `File`.`FileSize`=" + newFileSizeInBytes + " WHERE `File`='" + OriginalFileName + "'";
Console.WriteLine(query);
pkg.Execute(query);
query = "UPDATE `File` SET `File`.`Sequence`=" + Sequence.ToString() + " WHERE `File`='" + OriginalFileName + "'";
Console.WriteLine(query);
pkg.Execute(query);
}
}
}
デモンストレーションの使用法:
using System;
using System.Collections.Generic;
using System.Linq;
using System.Text;
namespace MSIFileManipulator
{
class Program
{
static void Main(string[] args)
{
string workdir = @"C:\Users\Me\MyDevFolder\tests";
string msiFile = "replace_test_copy.msi";
string fileName = "REPLACE_THIS_IMAGE.png";
List<string> filesToInclude = new List<string>();
System.IO.FileInfo fileInfo = new System.IO.FileInfo(System.IO.Path.Combine(workdir, fileName));
if (fileInfo.Exists)
{
Console.WriteLine("now adding: " + fileName + " to cabinet");
filesToInclude.Add(fileName);
updateMSI myMSI = new updateMSI();
string cabfileName = myMSI.createCabinetFileForMSI(workdir, filesToInclude);
Console.WriteLine("cabinet file saved as: " + cabfileName);
int diskID = myMSI.insertCabFileAsNewMediaInMSI(workdir, cabfileName, msiFile);
Console.WriteLine("new media added with disk ID: " + diskID.ToString());
myMSI.PointAPreviouslyConfiguredComponentsFileToBeFetchedFromAnotherCabinet(fileName, fileName, fileInfo.Length.ToString(), diskID);
Console.WriteLine("Done");
}
else
{
Console.WriteLine("Could not locate the replacement file:" + fileName);
}
Console.WriteLine("press any key to exit");
Console.ReadKey();
}
}
}
私のテストは、それが自己終了した後にクリーンアップされないことを認識しています..
于 2015-04-10T11:32:47.610 に答える
-1
これを行う最も簡単な方法は、MSI を再パッケージ化することです。
- Wise for Windows インストーラーで MSI ファイルを開きます。ファイルを抽出するオプションを選択します。
- ディスク上のファイルを見つけて置き換えます。
- MSI をビルドします。
これらの手順は、InstallShield でも機能するはずです。
于 2008-09-24T22:03:51.197 に答える