9

MacOS 10.8.2 で python 2.6 を実行しており、Numpy をインストールして NLTK を使用しようとしています。以下に強調表示されているいくつかのアプローチを見てきましたが、まだパッケージをインストールできていません。

  1. この提案に従って xcode をインストールしましたが、何も解決していません。

  2. を使用して、直接ビルドしてみました

    python setup.py build --fcompiler=gnu95
    

    次のメッセージを返します

    RuntimeError: Broken toolchain: cannot link a simple C program
    
  3. 直接インストール、ここから dmg ファイルをダウンロードしました。ファイルを直接抽出するnumpyと、Python 2.6 以降をインストールする必要があると不平を言うため、これも失敗します。

    MacOSにはAppleバージョンのPythonが付属しており、これを使用したくないとどこかで読みました。Eclipse と PyDev をインストールしましたが、Apple バージョンを使用していないと思いますが、これが正しくnumpy、Python の「適切な」バージョンにインストールされていることを確認する方法はありますか?

  4. 走ってみると

    sudo easy_install numpy

    以下の出力が得られます。最初は C/Fortran コンパイラが見つからないことと関係があると思っていましたが、gfortran直接ビルドしたときにインストールしたので、おそらく問題は別のものです...残りの部分を見て問題を診断することはできませんメッセージですが。

numpyこのすべての後、インストールに役立つ決定的なものを教えてくれる人はいますか? 私がこれまでに試したことの何が間違っているのでしょうか?

よろしくお願いします!

Searching for numpy
Reading http://pypi.python.org/simple/numpy/
Reading http://numpy.scipy.org
Reading http://sourceforge.net/project/showfiles.php?group_id=1369&package_id=175103
Reading http://numeric.scipy.org
Best match: numpy 1.6.2
Downloading http://pypi.python.org/packages/source/n/numpy/numpy-1.6.2.zip#md5=7e13c931985f90efcfa0408f845d6fee
Processing numpy-1.6.2.zip
Running numpy-1.6.2/setup.py -q bdist_egg --dist-dir /tmp/easy_install-6DObmd/numpy-1.6.2/egg-dist-tmp-KMbGBl
Running from numpy source directory.non-existing path in '/private/tmp/easy_install-6DObmd/numpy-1.6.2/numpy/distutils': 'site.cfg'
/bin/sh: svnversion: command not found
/bin/sh: svnversion: command not found
Could not locate executable f95
Could not locate executable f90
Could not locate executable f77
Could not locate executable xlf90
Could not locate executable xlf
Could not locate executable ifort
Could not locate executable ifc
Could not locate executable g77
Found executable /usr/local/bin/gfortran
sh: /usr/bin/gcc-4.2: No such file or directory
sh: /usr/bin/gcc-4.2: No such file or directory
Traceback (most recent call last):
  File "/opt/local/bin/easy_install", line 8, in <module>
    load_entry_point('setuptools==0.6c11', 'console_scripts', 'easy_install')()
  File "/opt/local/Library/Frameworks/Python.framework/Versions/2.6/lib/python2.6/site-packages/setuptools-0.6c11-py2.6.egg/setuptools/command/easy_install.py", line 1712, in main
  File "/opt/local/Library/Frameworks/Python.framework/Versions/2.6/lib/python2.6/site-packages/setuptools-0.6c11-py2.6.egg/setuptools/command/easy_install.py", line 1700, in with_ei_usage
  File "/opt/local/Library/Frameworks/Python.framework/Versions/2.6/lib/python2.6/site-packages/setuptools-0.6c11-py2.6.egg/setuptools/command/easy_install.py", line 1716, in <lambda>
  File "/opt/local/Library/Frameworks/Python.framework/Versions/2.6/lib/python2.6/distutils/core.py", line 152, in setup
    dist.run_commands()
  File "/opt/local/Library/Frameworks/Python.framework/Versions/2.6/lib/python2.6/distutils/dist.py", line 987, in run_commands
    self.run_command(cmd)
  File "/opt/local/Library/Frameworks/Python.framework/Versions/2.6/lib/python2.6/distutils/dist.py", line 1007, in run_command
    cmd_obj.run()
  File "/opt/local/Library/Frameworks/Python.framework/Versions/2.6/lib/python2.6/site-packages/setuptools-0.6c11-py2.6.egg/setuptools/command/easy_install.py", line 211, in run
  File "/opt/local/Library/Frameworks/Python.framework/Versions/2.6/lib/python2.6/site-packages/setuptools-0.6c11-py2.6.egg/setuptools/command/easy_install.py", line 446, in easy_install
  File "/opt/local/Library/Frameworks/Python.framework/Versions/2.6/lib/python2.6/site-packages/setuptools-0.6c11-py2.6.egg/setuptools/command/easy_install.py", line 476, in install_item
  File "/opt/local/Library/Frameworks/Python.framework/Versions/2.6/lib/python2.6/site-packages/setuptools-0.6c11-py2.6.egg/setuptools/command/easy_install.py", line 655, in install_eggs
 File "/opt/local/Library/Frameworks/Python.framework/Versions/2.6/lib/python2.6/site-packages/setuptools-0.6c11-py2.6.egg/setuptools/command/easy_install.py", line 930, in build_and_install
  File "/opt/local/Library/Frameworks/Python.framework/Versions/2.6/lib/python2.6/site-packages/setuptools-0.6c11-py2.6.egg/setuptools/command/easy_install.py", line 919, in run_setup
  File "/opt/local/Library/Frameworks/Python.framework/Versions/2.6/lib/python2.6/site-packages/setuptools-0.6c11-py2.6.egg/setuptools/sandbox.py", line 62, in run_setup
  File "/opt/local/Library/Frameworks/Python.framework/Versions/2.6/lib/python2.6/site-packages/setuptools-0.6c11-py2.6.egg/setuptools/sandbox.py", line 105, in run
  File "/opt/local/Library/Frameworks/Python.framework/Versions/2.6/lib/python2.6/site-packages/setuptools-0.6c11-py2.6.egg/setuptools/sandbox.py", line 64, in <lambda>
  File "setup.py", line 214, in <module>
  File "setup.py", line 207, in setup_package
  File "/tmp/easy_install-GH52RV/numpy-1.6.2/numpy/distutils/core.py", line 186, in setup
  File "/opt/local/Library/Frameworks/Python.framework/Versions/2.6/lib/python2.6/distutils/core.py", line 152, in setup
    dist.run_commands()
  File "/opt/local/Library/Frameworks/Python.framework/Versions/2.6/lib/python2.6/distutils/dist.py", line 987, in run_commands
    self.run_command(cmd)
  File "/opt/local/Library/Frameworks/Python.framework/Versions/2.6/lib/python2.6/distutils/dist.py", line 1007, in run_command
    cmd_obj.run()
  File "/opt/local/Library/Frameworks/Python.framework/Versions/2.6/lib/python2.6/site-packages/setuptools-0.6c11-py2.6.egg/setuptools/command/bdist_egg.py", line 167, in run
  File "/opt/local/Library/Frameworks/Python.framework/Versions/2.6/lib/python2.6/distutils/cmd.py", line 333, in run_command
    self.distribution.run_command(command)
  File "/opt/local/Library/Frameworks/Python.framework/Versions/2.6/lib/python2.6/distutils/dist.py", line 1007, in run_command
    cmd_obj.run()
  File "/tmp/easy_install-GH52RV/numpy-1.6.2/numpy/distutils/command/egg_info.py", line 8, in run
  File "/opt/local/Library/Frameworks/Python.framework/Versions/2.6/lib/python2.6/distutils/cmd.py", line 333, in run_command
    self.distribution.run_command(command)
  File "/opt/local/Library/Frameworks/Python.framework/Versions/2.6/lib/python2.6/distutils/dist.py", line 1007, in run_command
    cmd_obj.run()
  File "/tmp/easy_install-GH52RV/numpy-1.6.2/numpy/distutils/command/build_src.py", line 152, in run
  File "/tmp/easy_install-GH52RV/numpy-1.6.2/numpy/distutils/command/build_src.py", line 163, in build_sources
  File "/tmp/easy_install-GH52RV/numpy-1.6.2/numpy/distutils/command/build_src.py", line 298, in build_library_sources
  File "/tmp/easy_install-GH52RV/numpy-1.6.2/numpy/distutils/command/build_src.py", line 385, in generate_sources
  File "/private/tmp/easy_install-GH52RV/numpy-1.6.2/numpy/core/setup.py", line 696, in get_mathlib_info
RuntimeError: Broken toolchain: cannot link a simple C program
/tmp/easy_install-GH52RV/numpy-1.6.2/numpy/distutils/misc_util.py:252: RuntimeWarning: Parent module 'numpy.distutils' not found while handling absolute import
Error in atexit._run_exitfuncs:
Traceback (most recent call last):
  File "/opt/local/Library/Frameworks/Python.framework/Versions/2.6/lib/python2.6/atexit.py", line 24, in _run_exitfuncs
    func(*targs, **kargs)
  File "/tmp/easy_install-GH52RV/numpy-1.6.2/numpy/distutils/misc_util.py", line 252, in clean_up_temporary_directory
ImportError: No module named numpy.distutils
Error in sys.exitfunc:
Traceback (most recent call last):
  File "/opt/local/Library/Frameworks/Python.framework/Versions/2.6/lib/python2.6/atexit.py", line 24, in _run_exitfuncs
    func(*targs, **kargs)
  File "/tmp/easy_install-GH52RV/numpy-1.6.2/numpy/distutils/misc_util.py", line 252, in clean_up_temporary_directory
ImportError: No module named numpy.distutils
4

3 に答える 3

13

これが私がこの問題を修正した方法です:

export CC=gcc
export CXX=g++
export FFLAGS=ff2c

ここの10.7のインストール手順で見つけた情報に基づいています: http://www.scipy.org/Installing_SciPy/Mac_OS_X

于 2013-01-03T00:10:18.373 に答える
3

Apple バージョンの python 2.7 には numpy が付属しているため、まったくインストールする必要はないというコメントがここにありました。

実行してみてください

>>> /usr/bin/python2.7
Python 2.7.2 (default, Jun 20 2012, 16:23:33) 
[GCC 4.2.1 Compatible Apple Clang 4.0 (tags/Apple/clang-418.0.60)] on darwin
Type "help", "copyright", "credits" or "license" for more information.
>>> import numpy

問題なく動作するはずです。システム Python 2.7 をデフォルトに設定し、そのために NLTK をインストールするだけです。

gccまた、 xcode をインストールした後でも失敗する理由の解決策も見つけました。コマンド ライン ツールは個別にインストールする必要があります。この投稿を見てください。

于 2012-11-15T10:59:16.333 に答える
1

Spicy Superpack は、Mac 10.8.2 およびその他の Intel Mac バージョン用の最新の 64 ビット科学ソフトウェア パッケージをインストールします。

Numpy (1.8) および Scipy (0.12) Matplotlib (1.3) iPython (0.14) Pandas (0.10) Statsmodels (0.5.0) Scikit-Learn 0.14 PyMC (2.2)

Mac用スパイシースーパーパック

于 2013-03-11T03:22:15.420 に答える