高い、
このスレッドは、私が数週間前に同様の問題を解決しようとしたときに行った検索でたくさん出てきました。
私は今解決策を持っているので、同じ問題でここに着陸する他の人の利益のためにそれを渡すと思いました
問題の概要とすでに与えられたいくつかのポイントの明確化
VBA入力ボックス機能(およびVBA MsgBoxボックス機能)はモーダル、言い換えると、スプレッドシートが起動しているときは、スプレッドシートに対して何もできません。彼らはうまくいくようです。アプリケーション入力ボックスメソッドを使用すると、最後のType:=オプション
を選択したときに、このスプレッドシートを選択できるようになります。Type :=8。(実際、スプレッドシートの選択はすべてのType:=オプションで使用できますが、 Type:= 8(Range)は、私にとってはOPにとって特に興味深いものでした。VBA入力ボックス関数では、ボックス入力バーに文字列情報を入力することしかできません)
アプリケーション入力ボックスメソッドでは、スプレッドシートの選択を介してこのType:= 8(範囲)を実行できますが、いくつかの問題があります:
_ポップアップを配置する機能(Excel 2007以降は壊れているようです)
_Microsoftヘルプ機能はExcel200320072010では機能しないようです。アプリケーション入力ボックスの方法
Aソリューションで機能したかどうかはわかりません。私は現在使用しています
(これは、比較として自分の作業のために個別に検討しているため、特にユーザーフォームを使用したソリューションではありません)。これはAPIプログラムを使用して範囲を選択する代替のユーザー疑似入力ボックスをポップアップします。
このソリューションは、特にこのスレッドの主な問題である最初の問題のために、私がそれを行った主な理由であるこれらの問題を克服します。また、役立つ可能性のあるいくつかの追加事項があります
。_ポップアップのサイズ(幅、高さ)を選択できます。_
「z」を調整できます…これらのオプションについてはあまり明確ではありませんが、簡単に言えば表示するウィンドウの順序、表示する方法と優先度、表示するウィンドウの「下」または「上」などの観点から、表示方法を調整することを意味します。_ByRef
の単純な変更通話の署名欄のByValへedルーチンを使用すると、範囲オブジェクトの値を選択した値に変更できますが、元の範囲オブジェクトは変更されません。つまり、そのアドレスは選択前と同じままです。これにより、スプレッドシートでの選択と移動の方法に追加のオプションが提供される可能性があります。
すべてのコードを同じコードモジュールにコピーする必要があります。(詳細なコメントがイライラする場合は、数回クリックするだけで簡単にすべてをタンクに入れることができます。ここを参照してください:mrexcel.com/forum/about-board/795476-comments-code.html#post3893448)
最初のセクションRem1とRem2は、必要なAPIプログラムを利用可能にし、いくつかの関連するグロビアル変数を宣言します( Dim ’s)。このセクションは、コードモジュールの先頭に配置する必要があります。
Rem 1は単純明快で、疑似非モーダルメッセージボックスを利用できるようにします。
Rem 2はもう少し複雑で、 Windowsが起動したときに Windowsをいじるのに必要ないくつかのAPIプログラムを利用できるようにします。
Option Explicit ' “Window"s is a name for a programming idea which might result in something we “see” as what we conceive as Windows. Manipulating of the actual “Windows” seems the key to pseudo “making my own” InputBox with range selection. Direct linked libraries (dll) are available to run as and when required, hence the wording of direct link: They are used as an efficient means to organise Microsoft’s software generally allowing different Applications to share smaller programs which are shipped as standard with the Microsoft Windows Operating system. They are however also available to programmers , programming the applications. They are usually contained in Folder with name similar to User 32. "API calls”: just means usually that you are using those things and related “Windows” concept-all gets gets bundled up in imprecise intimidating term API, for Application Programming interface
Rem 1 Pseudo Non Modal MsgBox, MessageBoxA API Standard Non Standard Stuff, More Fundamentally complicated UnWRap it and.. "Pseudo Non Modal MsgBox" --- A valid handle, hWnd, other than the Excel spreadsheet window ( Private Declare Function FindWndNumber Lib "user32" Alias "FindWindowA" (Optional ByVal lpClassName As String, Optional ByVal lpWindowName As String) As Long --- hWndParent = FindWndNumber(lpClassName:="XLMAIN", lpWindowName:=vbNullString) ), or even no ( Null ) hWnd results in a pseudo Non Modal MsgBox http://www.excelfox.com/forum/showthread.php/2227-VBA-Input-Pop-up-Boxes-Application-InputBox-Method-versus-VBA-InputBox-Function?p=10476#post10470 http://www.tek-tips.com/faqs.cfm?fid=4699
Private Declare Function APIssinUserDLL_MsgBox Lib "user32" Alias "MessageBoxA" (Optional ByVal hWnd As Long, Optional ByVal Prompt As String, Optional ByVal Title As String, Optional ByVal Buts As Long) As Long '
'_- ==== The above is all I need to do so that writing APIssinUserDLL_MsgBox in any code in this code module will do something very similar to the VBA MsgBox. The main difference is that when it is up, I can still scroll up and down in my Excel Spreadsheet and also select a range.
Rem 2_b)(ii) == To set/change The positional arguments "Sub Classing a "Window"" As is generally the case with “Window” Functions, A window belongs to a class. The Dynamic Linked Libraries concept allow the small programs in the with windows shipped typically in the User32 Folder programs to be called up / used at runtime, rather than a fixed set of instructions copied or and/ or used as such at some point. This allows for a modification of the class, known as Sub classing. This means that it is possible to modify / add to the “Window” Function and so pseudo create a customised ddl. It does not necessarily mean that a “Window” Function or a used User32 Folder program is directly Sub classes , but it just happens to be in our case as we are intending to mess about with the MessageBoxA ( or MessageBoxTimeoutA ) You can arrange that a used “Window” Function is modified as it is used.
' The next four line will tie something on my chain for when you pull it. Similar in the way that a Worksheet_change code is triggered as something happens, you must arrange that a VBA Function is triggered when a Windows “event” occurs. At this point the concept gets a bit vague and I doubt many people really understand anymore how it really works. A good name for the VBA Function might be Function WinSubWinCls_JerkBackOffHooKterd. This VBA Function will itself be a pseudo “Window” Function and “hung” or hooked on a chain of events. Because of the dynamic / volatile nature of the stuff, things will have a habit of going on forever if they not “unhooked” such that a procedure will have to be designed to unhook itself.
Private Declare Function SetWindowsHooksExample Lib "user32" Alias "SetWindowsHookExA" (ByVal Hooktype As Long, ByVal lokprocedureAddress As Long, Optional ByVal hmod As Long, Optional ByVal DaFredId As Long) As Long ' The effect of this will be: In some predetermined set of instructions or planned chain of events, a “hook” or “marker” or “clap trap” or “page marker” or “trip trap” was made. This was given an identifying number which was returned by that “API Function” and it was chosen to be placed in the main code in a globial variable hHookTrapCrapNumber. I do not think that this number identifies the “page in the book” where the bookmarker is. I think it just is listed somewhere in a list of any active / set up book marks. I guess there might be / could be a few, so you need to distinguish them.
Dim hHookTrapCrapNumber As Long ' "BookmarkClassNumber --- This makes pseudo Declare Sub() SetWindowsHooksExample Lib "user32" AliAs "SetWindowsHookExA" (ByVal hHookTrapCrapNumber As Long, ByVal Hooktype As Long, ByVal MyloksPROCedureFukAddress As Long, Optional ByVal RadioButton2Out As Long, Optional ByVal duhFredId As Long) As Long It was also disgust that possibly the number refers to set instances of a Bookmark class: there may be a few , but they are all effectively connected / activated by the number hHookTrapCrapNumber existing in some register. The bookmarker has a particular type, ( 5 ). The type will be responsible for catching the Message box code line to call the MessageBoxA, (like APIssinUserDLL_MsgBox &H0, "Select Range", "working ApplicationPromptToRangeInputBox", vbYesNoCancel ). That fires my hook PROCedure Function, WinSubWinCls_JerkBackOffHooKterd. Other things may also fire my hook PROCedure Function. They may or may not be also related to the Popping up of my Box.
' Dim BookMarkClassTeachMeWind As Long: Let BookMarkClassTeachMeWind = 5 ' 5 is Hooktype that I will be using. Using a variable for two reasons: '1_- general point in computing that you might get problems when a number is used to refer to something that might take or give a number at some point. But you might need to do that, so having an intermediate word is a workaround for that so that the number is set to a word which is then related to a word that might be being referred to or returning a number. Function = Word --- Word = 873248 '2_- Just to avoid confusion Later as in this particular case later another option number happens to be 5
Private Declare Function GetDaFredId Lib "kernel32" Alias "GetCurrentThreadId" () As Long ' The Thread is what is going on, I expect that means in this case my VBA. My computer might do something else with or without me knowing. Most things going on will have a Thread number. When used in my code, Function GetDaFredId will return an identifying number referring to the Excel instance that that code line is in. It is actually needed in the setting of the Windows hook code line only ( that which is last argument in SetWindowsHookEx( , , , DaFredId As Long) ... set a hook, confined to the current thread (so it doesn't get triggered by other things going on) and give it the address of the function that you want to call in response to the hook being triggered. In this I will use 5 CBT hook which is triggered generally by Window messages (activating, creating, destroying, minimizing, maximizing, moving, or sizing a window)
' This below takes it off the chain. Or wipe the chain clean. Or remove it from something. Or cancel it. Or Kill it. Or whatever. In any case it needs the identifying number of the "hook", then a simple code line as shown in comment below will do this "Killing" Without doing this the thing seems to go on indefinitely (with or without any recursion. (A recursion is another issue which seems to happen as an additional issue - that occurs when the final API code below (over next line) does its job - that seems to fire my Hook PROCedure function WinSubWinCls_JerkBackOffHooKterd
Private Declare Function UnHookWindowsHookCodEx Lib "user32" Alias "UnhookWindowsHookEx" (ByVal hHookTrapCrapNumber As Long) As Long ' 'Release the Hook This is used in code in a simple code line like:- Call UnHookWindowsHookCodEx(hHookTrapCrapNumber)
'_- === All of the above in section Rem 2 is required so that I am able to organise that when I use APIssinUserDLL_MsgBox another program (my windows hookProcedure program WinSubWinCls_JerkBackOffHooKterd) is triggered. (It has a habit of being triggered indefinitely so the API program Decared in the last line above will be used to stop that happening).
'2(d)=== The Final API program below we need to actually do what we want. (WindowIdentifyinghandle, zorder , x , y , width , height , zFurtherInfo ) '_- Most is obvious, except the z stuff - WindowIdentifyinghandle/wParam is one the parameters passed in some secret process to my Function WinSubWinCls_JerkBackOffHooKterd( , wParam , ) and will be the windows identifying number for my Message box that is popping up. ( ,10 ,50 ,400 ,150 , ) These four numbers are the horizontal and vertical size and positions. ( 0, , , , ,40 ) The two numbers 0 and 40 are chosen after a bit of intuitive guessing based on Microsoft references like https://msdn.microsoft.com/en-us/library/windows/desktop/ms633545(v=vs.85).aspx The end effect is to have the window seen as dominantly as wanted. They are likely to be based to some extent on experimenting in a particular requirement.
Private Declare Function SetWindowPosition Lib "user32" Alias "SetWindowPos" (ByVal hWnd As Long, ByVal zNumber As Long, ByVal CoedX As Long, ByVal CoedY As Long, ByVal xPiXel As Long, ByVal yPiYel As Long, ByVal wFlags As Long) As Long ' This API prog will be called in my hook PROCedure function. So.. Rem 2a)-c) sets "Bookmark"/ series of "Bookmarks"/ Microsoft Windows cyber Robot monitering events (of "type 5", i.e. my Pop up coming up is one such. When such a event occurs my function is triggered by Windows software monitering Robot, he knows where/which my function WinSubWinCls_JerkBackOffHooKterd is from the AddressOf in a "hook setting code line" like (5 ,AddressOf WinSubWinCls_JerkBackOffHooKterd , 0, ThreadID) The monitoring Robot program thing passes somehow (a number from a list of event types to tell me more precisely what event it noticed, wParam-identifying number of the Window doing that event, possibly some other mouse thing info thing am not bothered about)
Dim Booloks As Boolean ' I use this in the code line Booloks = SetWindowPosition(WindowIdentifyinghandle, zorder,x, y, width, height ,zFurtherInfo) I don't seem to need this, but as a function, the SetWindowPos is designed to return a value. In this usage I have not experienced problems using it as a Sub routine Call like Call SetWindowPosition( , , , , , , ) but to be on the safe side I have used it as a Function returning its return in a Boolean variable, Booloks
Dim GlobinalCntChopsLog As Long ' I use this to keep track of the copy number of my Hook PROCedure function WinSubWinCls_JerkBackOffHooKterd, that is to say check for when that = 2. If that is the case I do the "unhooking" and Exit the Function
セクション3a)は、範囲を選択してポップアップユーザーの疑似入力ボックスを使用/呼び出すメインコードになります。私が行った簡単なデモは、 ByRefからByVal
へ
の変更について述べたことを説明するのに役立ちます。次のコードセクションの冒頭でコードをいじって変更すると(ByXxx)、そこで私が提案していることのポイントが得られると思います。
したがって、セクション3a)で、問題に関連する主なものはline Call HangAHookToCatchAPIssinUserDLL MsgBoxThenBringThatMsgBoxUp(RSel)
そのコード行によってポップアップが表示され、選択したスプレッドシートの範囲が変数RSelの範囲オブジェクトとして返されます。コードは、選択が完了するまで待機しますが、選択を妨げることはありません。したがって、その点では、アプリケーション入力ボックスメソッドと同様に機能します(そのアプリケーション入力ボックスメソッドを使用し、最後のオプションをType:= 8として選択した場合)。
' ========================
Rem 3a) This is just to demo the idea of a Pop Up User InputBox with range selection alternative with API User 32 dll Programs. ' Normally in this section 3a) there would be other stuff and probably lots of it and if I have anything to do with it then it will be very Pretty.. Pretty well disgusting probably.
Sub MainSubWithAllOtherStuffInIt() ' This would be your main coding and would nornally be a lot bigger, it is just here as part of the demo for a Pop Up User InputBox with range selection alternative with API User 32 dll Programs
' Some where in the main code I might want to ask the user to select a range. So to do that I
Dim RSel As Range ' This is a variable to hold the Pointer to the users range object.. So this variable in VBA is like the Link to the part of a URL string reducing size site where a few things about the actual Final site is informed about. This area in that site, like a pigeon Hole to which the variable refers, ( the "pigeon hole" location address, and all its contents would be defined as the "Pointer". Amongst other things it has a link, a "Pointing part", pointing to actually where all the stuff is
'Set RSel = Selection ' This line will be needed if you chose to send ByVal. That is necerssary to ensure that you have a range object - If you do not have a range object when you go to HangAHookToCatchAPIssinUserDLL_MsgBoxThenBringThatMsgBoxUp(ByVal RcelsToYou), then you wont have one when you get back neither, as in HangAHookToCatchAPIssinUserDLL_MsgBoxThenBringThatMsgBoxUp you will be Set ing the copy variable, not the actual RSel variable. You put a copy of the Pointer in the new variable. But it is an object. A different object. A Copy object. https://www.excelforum.com/excel-programming-vba-macros/1138804-help-understanding-class-instancing-cant-set-ws-new-worksheet-intellisense-offers-it-2.html#post4386360
Call HangAHookToCatchAPIssinUserDLL_MsgBoxThenBringThatMsgBoxUp(RSel) ' In a normal application of the main Theme of all this, this would be the main code line you use to cause a the "Pop Up User pseudo InputBox with range selection alternative with API User 32 dll Programs"
VBA.MsgBox Prompt:="Address check RSel - It is now " & RSel.Address & "" & vbCrLf & "Da .Value of the range object is " & RSel.Value ' Just done to demo that A simple change of the ByRef to ByVal in the signature line of a Called routine allows you to change the value of a range object to that of the selection, but the original range object will not change, that is to say its address remains as before the selection.
End Sub
セクション3b)-3c)は2つの主要なことを行います。
_「フック」は「ハング」であり、両方の
__「非モーダルメッセージボックス」がポップアップするのと同様の「キャッチ」イベントを
実行し、それが実行されると
__関数WinSubWinClsJerkBackOffHooKterd
をトリガーします。 'コメント(および以下の最初の参照)の詳細。
実際にエンドエフェクトで発生するように見えるのは、通常、メッセージボックスがポップアップすると、実際に必要な「イベント」(メッセージ)に到達する前に関数が6回トリガーされることです。ボックスウィンドウがアクティブ化されています
Private Sub HangAHookToCatchAPIssinUserDLL_MsgBoxThenBringThatMsgBoxUp(ByRef RcelsToYou) ' This will by referral To You, (RSel), the actual Pointer of you the original RSel. This is not too important a point here, but intersting if you consider the next line alternative to this one.....
' Public Sub HangAHookToCatchAPIssinUserDLL_MsgBoxThenBringThatMsgBoxUp(ByVal RcelsToYou) The RSel Pointer aint Gone anywhere if you do this. Just a copy of the Pointer is here. This will allow you to change the value as the Pointer or a copy of it will tell you where to go and do that... But in neither this line or the last line case have you sent the range object. If you use this line then you will find that the address of the range object will not change, as that refers to the range object of the copy variable in this subroutine. But that will not change the range object of RSel
Set RcelsToYou = Selection ' 3c(-i) Pointer GoneTo -1 WTF
Noughty: ' 3c(0i) Pointer GoneTo 0y WTF
' 3b) Hang A Hook to catch things like APIssinUserDLL_MsgBox, .... HOOK: Hook the pseudo Windows Sub Class Function WinSubWinCls_JerkBackOffHooKerd
Dim BookMarkClassTeachMeWind As Long: Let BookMarkClassTeachMeWind = 5 ' I do not need this. 5 is Hooktype that I will be using. Using a variable for two reasons: '1_- general point in computing that you might get problems when a number is used to refer to something that might take or give a number at some point. But you might need to do that, so having an intermediate word is a workaround for that so that the number is set to a word which is then related to a word that might be being referred to or returning a number. Function = Word --- Word = 873248 '2_- Just to avoid confusion later as in this particular case later another option number in Rem 4 happens to be 5. That is checking for a Window opening. So it is similar to the 5 of BookMarkClassTeachMeWind, but it is a narrowed down version of those window happening things. So a bit of aa coincidence really. Using the variable just reminds me of that.
Let hHookTrapCrapNumber = SetWindowsHooksExample(BookMarkClassTeachMeWind, AddressOf WinSubWinCls_JerkBackOffHooKerd, 0, GetDaFredId) ' (5-pull before flush, somehow arranges that the function gets called ,
' 3c) Bring APIssinUserDLL_MsgBox up
Dim Valyou As Variant: Let Valyou = RcelsToYou.Value: If IsArray(Valyou) Then Valyou = Valyou(1, 1) 'For display Value of Top Left of Selection
Dim Rpnce As Long ' Long is very simple to handle, - final memory "size" type is known (123.456 and 000.001 have same "size" computer memory ) , and so a Address suggestion can be given for the next line when the variable is filled in. '( Long is a Big whole Number limit (-2,147,483,648 to 2,147,483,647) If you need some sort of validation the value should only be within the range of a Byte/Integer otherwise there's no point using anything but Long.--upon/after 32-bit, Integers (Short) need converted internally anyways, so a Long is actually faster. ) https://www.mrexcel.com/forum/excel-questions/803662-byte-backward-loop-4.html
Let Rpnce = APIssinUserDLL_MsgBox(hWnd:=&H0, Prompt:="Yes, or No to ReCheck, Cancel for help ", Title:="Selection Check: Address is " & RcelsToYou.Address & " Value is """ & Valyou & """", Buts:=vbYesNoCancel) ' ' Pseudo Non Modal MsgBox
Set RcelsToYou = Selection: Let Valyou = RcelsToYou.Value: If IsArray(Valyou) Then Valyou = Valyou(1, 1) 'The code waited until you made one of the three message box options. But in this time you could change the selection object
If Rpnce = 2 Then Application.Help HelpFile:=ThisWorkbook.Path & "\AnyFileName.chm", HelpContextID:=2 ' ----- download this file: https://app.box.com/s/bx2pkvtemsppscz60rd6f430wm89c6fj This is a “.chm Microsoft Help file” It has the name _ AnyFileName.chm --- Put in same folder as this Workbook --- Check out possible workarounds --- http://www.excelfox.com/forum/showthread.php/2146-%E0%A4%AC%E0%A5%8D%E0%A4%B2%E0%A5%89%E0%A4%97-%E0%A4%95%E0%A5%8B%E0%A4%B6%E0%A4%BF%E0%A4%B6-%E0%A4%95%E0%A4%B0-%E0%A4%B0%E0%A4%B9%E0%A4%BE-%E0%A4%B9%E0%A5%88-%D8%A8%D9%84%D8%A7%DA%AF%D8%B2-%DA%A9%DB%8C-%DA%A9*Trying-Blogs?p=10467#post10467 --- you shopuld get this HelpGetUpBollox.JPG imgur.com/KdKOYWr
If Rpnce = 7 Then GoTo Noughty ' Option to update the displayed Address and Value in Top Left cell of that range
End Sub
セクションRem4は関数WinSubWinClsJerkBackOffHooKterdです。
これは、「非モーダルメッセージボックス」がアクティブ化されているという特定のイベントを選択し、APIのものSetWindowPos
を使用してウィンドウのサイズを変更します
(主に実験する必要があります) 、真ん中の4つの数字10 50 400 150
両端の2つの数字、0 40、同様に調整することをお勧めします。これら2つの数字を完全に理解することは、私を少し超えています。WTFを理解するのに1週間の大部分を要しました。他のすべてのものは約でした)。
この関数が最後に行うことは、「フック」または「フックの「フックを外す」」を「キル」または「ドロップ」または「離陸」することです。そうしないと、関数が無期限にトリガーされるように見えます。
同様の点に関する最後のこと:私が見たのと同様のことを行う他のいくつかのコードは、ワイルドな再帰を引き起こしているように見えました: SetWindowPosによって関数で行われたサイズ調整は、関数コードを再び引き立たせたようです。スタックは30に制限されているように見えました。その理由はわかりませんでした。実際、デスクトップに奇妙な一貫性のない幽霊のような画像が表示されることがあり、場合によっては永続的に表示されることもありました。私の関数は、一度だけ実行する必要があると思うことを実行します。より安定しているように見えます。APIを正しく取得する前に、ブレーキをかけるのはとても楽しいものでした。しかし、それ以来、さまざまなコンピューターやさまざまなExcelバージョンのさまざまなコード状況で、コードは問題なく正常に機能しているようです。(私が試したすべての状況で、私のコードにはExitがあります-関数が最初の再帰コピー実行の開始時にあるかどうかをIf句が検出した後、予想どおりに編集されました。( SetWindowPosが再帰を引き起こさない場合に備えて、SetWindowPosの直後にフックを解除しても害はないと思います*** 。( ***数回「フックを解除」しようとしても害はないようです。 )))
Rem 4============= Some hidden function / bookmark / bookmarks / cyber Robot thing was brought into life ("I hung or set a hook"). That monitors events like my message box popping up. When it catches one it starts this finction and passes to it three parameters. The first tells me with a number more excactly what even took place, the next is the window identifying number of that window doing that particular event , the last parameter is something maybe to do with the mouse god knows what exactly probably even Sid don't know... but looking at his Avatar I probably wouldn't say that to him as he I don't know if I would want to mess with him...
Private Function WinSubWinCls_JerkBackOffHooKerd(ByVal lMsg As Long, ByVal wParam As Long, ByVal lParam As Long) As Long ' I "set a hook" which should trigger ( things similar to my Meassage box popping up , and gave it the AddressOf this function , 0 , and limited it to this "Thread" on my computer that is to say my Excel )
Let GlobinalCntChopsLog = GlobinalCntChopsLog + 1 ' The idea of this is that I add 1 on entering and subtract 1 when leaving the function. So this would be two if I started an other copy of this code before the first had finished. I am expecting that as the SetWindowPosition seemes to trigger it off again.
If GlobinalCntChopsLog = 2 Then Let GlobinalCntChopsLog = GlobinalCntChopsLog - 1: UnHookWindowsHookCodEx hHookTrapCrapNumber: Exit Function ' If I have 2 then that is an indication that recurtion has taken place, that is to say I started another function run caused by SetWindowPosition triggering it off. So i assume then that SetWindowPosition has done what it should so I can "take the hook off" (as if i did not then the function seems to get triggeredt indefinitely even without recusion), and then I exit the function. So I do expect a second copy of the code to run, but due to this it does not do anything other than take the "hook off". I also reduce the count by 1. It is then at 1. But then the first copy of the function ends from just under SetWindowPosition. So then the count is reduced again and is at the initial 0
If lMsg = 5 Then Let Booloks = SetWindowPosition(wParam, 0, 10, 50, 400, 150, 40) ' 5 here is the number for a window about to be activated. This is probably the one I want. If I catch it when it is starting , 3, then It might then re set the size and position stuff again to the standard after I have done it
Let GlobinalCntChopsLog = GlobinalCntChopsLog - 1 ' Every first copy run of the code has the count reduced to 0 so that when it starts again (as the only first copy active) it will be increased to 1 again to indicate it is a run of the function copy 1
End Function
それが同じまたは同様の問題でOPや他の人を助けるかもしれないことを願っています。
アラン
参照: http:
//www.excelfox.com/forum/showthread.php/2227-VBA-Input-Pop-up-Boxes-Application-InputBox-Method-versus-VBA-InputBox-Function
http://www.mrexcel .com / forum / excel-questions / 447043-left-top-arguments-application-inputbox-method.html
http://www.vbforums.com/showthread.php?617519-RESOLVED-Excel-InputBox-position-works- in-2003-but-not-2007
https://www.excelforum.com/excel-new-users-basics/1099015-vba-application-inputbox-option-helpfile-helpcontextid.html#post4827566