10

私は問題があります。

動的 BMP イメージを生成し、これを ZPL コマンドで ZEBRA プリンターに送信しようとしています。BMP を GRF イメージに変換する必要があります。BMP 画像から抽出した 16 進数が正しくないと思います。

印刷された画像がぼやけて正しくない。

これは私のコードです:

string bitmapFilePath = @oldArquivo;  // file is attached to this support article
byte[] bitmapFileData = System.IO.File.ReadAllBytes(bitmapFilePath);
int fileSize = bitmapFileData.Length;

Bitmap ImgTemp = new Bitmap(bitmapFilePath);
Size ImgSize = ImgTemp.Size;
ImgTemp.Dispose();

// The following is known about test.bmp.  It is up to the developer
// to determine this information for bitmaps besides the given test.bmp.            
int width = ImgSize.Width;
int height = ImgSize.Height;
int bitmapDataOffset = 62; // 62 = header of the image
int bitmapDataLength = fileSize - 62;// 8160;    

double widthInBytes = Math.Ceiling(width / 8.0);    

// Copy over the actual bitmap data from the bitmap file.
// This represents the bitmap data without the header information.
byte[] bitmap = new byte[bitmapDataLength];
Buffer.BlockCopy(bitmapFileData, bitmapDataOffset, bitmap, 0, (bitmapDataLength));

// Invert bitmap colors
for (int i = 0; i < bitmapDataLength; i++)
{
    bitmap[i] ^= 0xFF;
}

// Create ASCII ZPL string of hexadecimal bitmap data
string ZPLImageDataString = BitConverter.ToString(bitmap).Replace("-", string.Empty);

string comandoCompleto = "~DG" + nomeImagem + ".GRF,0" + bitmapDataLength.ToString() + ",0" + widthInBytes.ToString() + "," + ZPLImageDataString;
4

3 に答える 3

10

次のコードを試してください。未検証！

public static string CreateGRF(string filename, string imagename)
{
    Bitmap bmp = null;
    BitmapData imgData = null;
    byte[] pixels;
    int x, y, width;
    StringBuilder sb;
    IntPtr ptr;

    try
    {
        bmp = new Bitmap(filename);
        imgData = bmp.LockBits(new Rectangle(0, 0, bmp.Width, bmp.Height), ImageLockMode.ReadOnly, PixelFormat.Format1bppIndexed);
        width = (bmp.Width + 7) / 8;
        pixels = new byte[width];
        sb = new StringBuilder(width * bmp.Height * 2);
        ptr = imgData.Scan0;
        for (y = 0; y < bmp.Height; y++)
        {
            Marshal.Copy(ptr, pixels, 0, width);
            for (x = 0; x < width; x++)
                sb.AppendFormat("{0:X2}", (byte)~pixels[x]);
            ptr = (IntPtr)(ptr.ToInt64() + imgData.Stride);
        }
    }
    finally
    {
        if (bmp != null)
        {
            if (imgData != null) bmp.UnlockBits(imgData);
            bmp.Dispose();
        }
    }
    return String.Format("~DG{0}.GRF,{1},{2},", imagename, width * y, width) + sb.ToString();
}
于 2012-12-28T00:55:00.677 に答える
2

注意すべきことの 1 つは、変換されるビットマップがモノクロ (つまり、1 ピクセルあたり 1 ビット) である必要があることです。ZPL で単純なモノクロ画像を印刷する方法を示す Zebra のナレッジベースの例があります: https://km.zebra.com/kb/index?page=answeropen&type=open&searchid=1356730396931&answerid=16777216&iqaction=5&url=https%3A%2F%2Fkm .zebra.com%2Fkb%2Findex%3Fpage%3Dcontent%26id%3DSA304%26actp%3Dsearch%26viewlocale%3Den_US&highlightinfo=4194550,131,153# . 画像をモノクロ ビットマップに変換できる場合は、その例に従うことができるはずです。

// Given a monochrome bitmap file, one can read
// information about that bitmap from the header
// information in the file.  This information includes
// bitmap height, width, bitsPerPixel, etc.  It is required
// that a developer understands the basic bitmap format and
// how to extract the following data in order to proceed.
// A simple search online for 'bitmap format' should yield
// all the needed information.  Here, for our example, we simply
// declare what the bitmap information is, since we are working
// with a known sample file.

string bitmapFilePath = @"test.bmp";  // file is attached to this support article
byte[] bitmapFileData = System.IO.File.ReadAllBytes(bitmapFilePath);
int fileSize = bitmapFileData.Length;

// The following is known about test.bmp.  It is up to the developer
// to determine this information for bitmaps besides the given test.bmp.
int bitmapDataOffset = 62;
int width = 255;
int height = 255;
int bitsPerPixel = 1; // Monochrome image required!
int bitmapDataLength = 8160;
double widthInBytes = Math.Ceiling(width / 8.0);

// Copy over the actual bitmap data from the bitmap file.
// This represents the bitmap data without the header information.
byte[] bitmap = new byte[bitmapDataLength];
Buffer.BlockCopy(bitmapFileData, bitmapDataOffset, bitmap, 0, bitmapDataLength);

// Invert bitmap colors
for (int i = 0; i < bitmapDataLength; i++)
{
    bitmap[i] ^= 0xFF;
}

// Create ASCII ZPL string of hexadecimal bitmap data
string ZPLImageDataString = BitConverter.ToString(bitmap);
ZPLImageDataString = ZPLImageDataString.Replace("-", string.Empty);

// Create ZPL command to print image
string[] ZPLCommand = new string[4];

ZPLCommand[0] = "^XA";
ZPLCommand[1] = "^FO20,20";
ZPLCommand[2] =
    "^GFA, " +
    bitmapDataLength.ToString() + "," +
    bitmapDataLength.ToString() + "," +
    widthInBytes.ToString() + "," +
    ZPLImageDataString;

ZPLCommand[3] = "^XZ";

// Connect to printer
string ipAddress = "10.3.14.42";
int port = 9100;
System.Net.Sockets.TcpClient client =
    new System.Net.Sockets.TcpClient();
client.Connect(ipAddress, port);
System.Net.Sockets.NetworkStream stream = client.GetStream();

// Send command strings to printer
foreach (string commandLine in ZPLCommand)
{
    stream.Write(ASCIIEncoding.ASCII.GetBytes(commandLine), 0, commandLine.Length);
    stream.Flush();
}

// Close connections
stream.Close();
client.Close();
于 2012-12-28T21:39:39.507 に答える
0

widthInBytes に 2 を追加してください - 動作します!!!

        int bitmapDataOffset = int.Parse(bitmapFileData[10].ToString()); ;
        int width = 624;// int.Parse(bitmapFileData[18].ToString()); ;
        int height = int.Parse(bitmapFileData[22].ToString()); ;
        int bitsPerPixel = int.Parse(bitmapFileData[28].ToString()); // Monochrome image required!
        int bitmapDataLength = bitmapFileData.Length - bitmapDataOffset;
        double widthInBytes = Math.Ceiling(width / 8.0)+2;
于 2016-10-12T10:52:08.973 に答える