私は以下のように別のストアドプロシージャを呼び出す階層を持っています:
1
2
3
今私がやっていることは次のとおりです。まず、レベルが最も低い第 3 レベルの sp を表示しています。
CREATE proc [dbo].[proc_tblUserScheduleNewUpdateOnly]
(
@Scheduleid bigint=258,
@Contactid uniqueidentifier='EDE3E474-02CA-49C7-86DD-AA97794ECF8A',
@ScheduleDate datetime= '2012-07-16 00:00:00.000',
@StartTime varchar(20)='12:03:00.0000000',
@EndTime varchar(20)='15:00:00.0000000',
@Location bigint=8,
@Area bigint=7,
@Room bigint=9,
@Enddate datetime='2012-07-16 00:00:00.000',
@CurrentTime Datetime='2012-07-16 12:00:35.900',
@ModifiedBy uniqueidentifier='0BF84A77-FAC2-44E5-AF9B-39740415DBD2',
@schedulefileidNew bigint=''
)
as
Declare @schedulefileid bigint
if @schedulefileidNew=0
begin
set @schedulefileid=null
end
else
begin
set @schedulefileid=@schedulefileidNew
end
update tblUserScheduleNew set Contactid=@Contactid,
ScheduleDate =@ScheduleDate,
StartTime = @StartTime,
EndTime =@EndTime,
Location =@Location,
Area=@Area,
Room =@Room,
LastModifiedDate=@CurrentTime ,EndDate=@Enddate,
ModifiedBy=@ModifiedBy,
ScheduleFileId=@schedulefileid
where ScheduleId=@Scheduleid and IsDeleted=0 and isActive=1
select 1
次に、第 2 レベル:
CREATE Proc [dbo].[proc_tblUserScheduleNewFutureUpdate]
(
@StartDatePassed datetime='8/2/2012 12:00:00 AM',
@EndDatePassed datetime='8/2/2012 12:00:00 AM', --='2012-07-11 00:00:00.000',
@StartTimePassed varchar(20)='13:00:00',--='02:00:00.0000000',
@EndTimePassed varchar(20)='21:00:00',--='03:00:00.0000000',
@CurrentDateTime Datetime ='8/1/2012 5:50:31 AM', --='2012-07-11 02:07:35.900'
@Scheduleid bigint=0x0000000000000166,
@Contactid uniqueidentifier='77680636-bc4b-4489-9cec-3bc000ffe773',
@Location bigint=11,
@Area bigint=10,
@Room bigint=11,
@ModifiedBy uniqueidentifier='acf7961c-4111-49ad-a66a-ce7f9ce131bd',
@schedulefileidNew bigint=null
)
as
declare @ResultForInsertUpdate varchar(200);
if CONVERT(date,@StartDatePassed,101)>CONVERT(date,@CurrentDateTime,101) and
CONVERT(date,@EndDatePassed,101)>CONVERT(date,@CurrentDateTime,101) and
CONVERT(date,@EndDatePassed,101)>CONVERT(date,@StartDatePassed,101)
begin -- it will run when the Start date and end date passed are greater than Current date and EndDate is greater than Start date.
Print 'Update'
exec @ResultForInsertUpdate = dbo.proc_tblUserScheduleNewUpdateOnly @Scheduleid,@Contactid,@StartDatePassed,@StartTimePassed,@EndTimePassed,@Location,@Area,@Room,@EndDatePassed,@CurrentDateTime,@ModifiedBy,@schedulefileidNew
select @ResultForInsertUpdate;
end
else
begin
select 2
end
3番目と最後のレベル
Alter Proc proc_tblUserScheduleNewUpdateWithAllRoomsOption
(
@StartDatePassed datetime='2013-04-29 00:00:00.000',
@EndDatePassed datetime='2013-04-29 00:00:00.000',
@StartTimePassed varchar(20)='15:00:00',
@EndTimePassed varchar(20)='20:00:00',
@CurrentDateTime Datetime ='2013-04-25 00:00:00.000',
@Scheduleid bigint=1,
@Contactid uniqueidentifier='FD3E0DDF-8B91-493F-94DF-B8280AC33BC0',
@Location bigint=17,
@Area bigint=0,
@Room bigint=0,
@ModifiedBy uniqueidentifier='ACF7961C-4111-49AD-A66A-CE7F9CE131BD',
@schedulefileidNew bigint=null,
@OldStartDate Datetime='2013-04-26 00:00:00.000',
@OldEndDate DateTime='2013-04-26 00:00:00.000',
@OldStartTime varchar(20)='11:11:11.0000000',
@OldEndTime varchar(20)='22:22:22.0000000',
@OldContactid uniqueidentifier='DA101C1D-45A1-4F9A-B19B-4E88DDE01B10',
@OldLocation bigint=18,
@OldArea bigint=17,
@OldRoom bigint=22
)
as
-- declare variables Starts here
declare @row_count int;
DECLARE @intFlag INT=0;
declare @locationIdForLoop bigint ;
declare @AreaIdForLoop bigint ;
declare @RoomIdForLoop bigint ;
DECLARE @ResultForInsertUpdate INT
set @ResultForInsertUpdate=1;
-- declare tempraroy table to store location, Area and rooms Starts here
CREATE TABLE #tempTable (
RowNum int,
LocationId bigint,
AreaId bigint,
RoomId bigint
)
-- declare tempraroy table to store location, Area and rooms Ends here
if @Area=0 and @Room=0
begin
insert into #tempTable (RowNum,LocationId,AreaId,RoomId) (select ROW_NUMBER() OVER
(ORDER BY LocationId desc) RowNum, LocationId,AreaId,RoomId from
tblroomnew where areaid in(select Areaid from tblareanew where locationid=@Location))
set @row_count=(select count(*) from #tempTable)
SET @intFlag = 1
WHILE (@intFlag <=@row_count)
BEGIN
-- Do what ever you want to do here
set @locationIdForLoop=(select locationid from #tempTable where RowNum=@intFlag)
set @AreaIdForLoop=(select areaid from #tempTable where RowNum=@intFlag)
set @RoomIdForLoop=(select roomid from #tempTable where RowNum=@intFlag)
if @ResultForInsertUpdate=1
begin
if exists(select 1 from tbluserschedulenew where
convert(datetime,ScheduleDate,101)=convert(datetime,@OldStartDate,101) and
Convert(datetime,EndDate,101)=convert(datetime,@OldEndDate,101) and
convert(Time,StartTime,108)=convert(Time,@OldStartTime,108) and
convert(Time,EndTime,108) =convert(Time,@OldEndTime,108) and contactid=@OldContactid
and
Location=@OldLocation and Area=@OldArea and Room=@OldRoom )
begin
Print 'Update First record'
exec @ResultForInsertUpdate = proc_tblUserScheduleNewFutureUpdate @StartDatePassed,@EndDatePassed,@StartTimePassed,@EndTimePassed,@CurrentDateTime,@Scheduleid,@Contactid,
@locationIdForLoop,@AreaIdForLoop,@RoomIdForLoop,@ModifiedBy,@schedulefileidNew
--set @ResultForInsertUpdate=1
print @ResultForInsertUpdate
--select @ResultForInsertUpdate
end
else
begin
print 'insert karna hai record'
exec proc_tblUserScheduleNewLatestInsert @Contactid,@StartDatePassed,@StartTimePassed,@EndTimePassed,
@locationIdForLoop,@AreaIdForLoop,@RoomIdForLoop, @EndDatePassed,@ModifiedBy,0,@CurrentDateTime
--print @ResultForInsertUpdate
end
end
else
begin
select @ResultForInsertUpdate
end
SET @intFlag = @intFlag + 1
END
end
else
begin
if @Area!=0 and @Room=0
begin
insert into #tempTable (RowNum,LocationId,AreaId,RoomId) (select ROW_NUMBER() OVER (ORDER BY LocationId desc) RowNum, LocationId,AreaId,RoomId from
tblroomnew where areaid =@Area)
set @row_count=(select count(*) from #tempTable)
end
else
begin
print 'chalan do jo chal reha'
exec proc_tblUserScheduleNewFutureUpdate @StartDatePassed,@EndDatePassed,@StartTimePassed,@EndTimePassed,@CurrentDateTime,@Scheduleid,@Contactid,
@location,@Area,@Room,@ModifiedBy,@schedulefileidNew
--print 'simple update'
end
end
今私の問題は何ですか：
第 3 レベルの結果として 1 を選択しています。これは、第 2 レベルと第 3 レベルの「 @ResultForInsertUpdate 」に格納されます。
@ResultForInsertUpdate で 0 を取得しています。理由がわかりません。この問題の解決を手伝ってください