編集： OSXでプログラムを実行したときのtcpdump出力は次のとおりです。
Matthew-Mitchell:calm-ocean-4924 matt$ sudo tcpdump -X -i lo0 'port 45564'
Password:
tcpdump: verbose output suppressed, use -v or -vv for full protocol decode
listening on lo0, link-type NULL (BSD loopback), capture size 65535 bytes
22:52:41.620969 IP localhost.53685 > localhost.45564: Flags [S], seq 3787197032, win 65535, options [mss 16344,nop,wscale 4,nop,nop,TS val 465807577 ecr 0,sackOK,eol], length 0
0x0000: 4500 0040 ba9e 4000 4006 0000 7f00 0001 E..@..@.@.......
0x0010: 7f00 0001 d1b5 b1fc e1bc 0a68 0000 0000 ...........h....
0x0020: b002 ffff fe34 0000 0204 3fd8 0103 0304 .....4....?.....
0x0030: 0101 080a 1bc3 a8d9 0000 0000 0402 0000 ................
22:52:41.621062 IP localhost.45564 > localhost.53685: Flags [S.], seq 1362049502, ack 3787197033, win 65535, options [mss 16344,nop,wscale 4,nop,nop,TS val 465807577 ecr 465807577,sackOK,eol], length 0
0x0000: 4500 0040 8dac 4000 4006 0000 7f00 0001 E..@..@.@.......
0x0010: 7f00 0001 b1fc d1b5 512f 39de e1bc 0a69 ........Q/9....i
0x0020: b012 ffff fe34 0000 0204 3fd8 0103 0304 .....4....?.....
0x0030: 0101 080a 1bc3 a8d9 1bc3 a8d9 0402 0000 ................
22:52:41.621075 IP localhost.53685 > localhost.45564: Flags [.], ack 1, win 9186, options [nop,nop,TS val 465807577 ecr 465807577], length 0
0x0000: 4500 0034 fdb1 4000 4006 0000 7f00 0001 E..4..@.@.......
0x0010: 7f00 0001 d1b5 b1fc e1bc 0a69 512f 39df ...........iQ/9.
0x0020: 8010 23e2 fe28 0000 0101 080a 1bc3 a8d9 ..#..(..........
0x0030: 1bc3 a8d9 ....
22:52:41.621086 IP localhost.45564 > localhost.53685: Flags [.], ack 1, win 9186, options [nop,nop,TS val 465807577 ecr 465807577], length 0
0x0000: 4500 0034 53bf 4000 4006 0000 7f00 0001 E..4S.@.@.......
0x0010: 7f00 0001 b1fc d1b5 512f 39df e1bc 0a69 ........Q/9....i
0x0020: 8010 23e2 fe28 0000 0101 080a 1bc3 a8d9 ..#..(..........
0x0030: 1bc3 a8d9
libevent を使用したネットワーク コードを含むかなり大きなライブラリがあります。長い間、これは機能していましたが、最近ネットワーク コードを使用する新しいコードでは、接続が確立できないためほとんど機能しません。また、接続が完了しないにもかかわらず、接続タイムアウト イベントは発生しません (そうあるべきです)。これが機能しない例を示すために、コードを分離しようとしました。次のコードは、OSX Mountain Lion では (少なくとも) 機能しません。
#include <stdio.h>
#include <stdlib.h>
#include <pthread.h>
#include <event2/event.h>
#include <stdbool.h>
#include <string.h>
#include <errno.h>
#ifdef SO_NOSIGPIPE
#define CB_NOSIGPIPE true
#else
#define CB_NOSIGPIPE false
#define SO_NOSIGPIPE 0
#endif
void loopErr(void * vself);
void loopErr(void * vself){
printf("Loop error\n");
exit(EXIT_FAILURE);
}
void timeout(void * vself, void * foo);
void timeout(void * vself, void * foo){
printf("Timeout\n");
exit(EXIT_FAILURE);
}
void didConnect(void * vself, void * foo);
void didConnect(void * vself, void * foo){
printf("Did connect\n");
}
bool CBSocketAccept(int sock, int * connectionSock);
bool CBSocketAccept(int sock, int * connectionSock){
*connectionSock = accept(sock, NULL, NULL);
if (*connectionSock == -1)
return false;
// Make socket non-blocking
evutil_make_socket_nonblocking(*connectionSock);
// Stop SIGPIPE
int i = 1;
if (CB_NOSIGPIPE)
setsockopt(*connectionSock, SOL_SOCKET, SO_NOSIGPIPE, &i, sizeof(i));
return true;
}
void acceptConn(void * vself, int socket);
void acceptConn(void * vself, int socket){
int connSock;
if (! CBSocketAccept(socket, &connSock)){
printf("Unable to accept a connection.\n");
exit(EXIT_FAILURE);
}
printf("Did accept\n");
}
typedef struct{
struct event_base * base;
void (*onError)(void *);
void (*onTimeOut)(void *, void *); /**< Callback for timeouts */
void * communicator;
pthread_t loopThread; /**< The thread for the event loop. */
void (*userCallback)(void *);
void * userArg;
}CBEventLoop;
union CBOnEvent{
void (*i)(void *, int);
void (*ptr)(void *, void *);
};
typedef struct{
CBEventLoop * loop; /**< For getting timeout CBLogError */
struct event * event; /**< libevent event. */
union CBOnEvent onEvent;
void * peer;
}CBEvent;
void * CBStartEventLoop(void * vloop);
void * CBStartEventLoop(void * vloop){
CBEventLoop * loop = vloop;
// Start event loop
printf("Starting network event loop.\n");
if(event_base_dispatch(loop->base) == -1){
// Error
loop->onError(loop->communicator);
return NULL;
}
// Break from loop. Free everything.
event_base_free(loop->base);
free(loop);
return NULL;
}
void event_base_add_virtual(struct event_base *);
bool CBNewEventLoop(CBEventLoop ** loop, void (*onError)(void *), void (*onDidTimeout)(void *, void *), void * communicator);
bool CBNewEventLoop(CBEventLoop ** loop, void (*onError)(void *), void (*onDidTimeout)(void *, void *), void * communicator){
struct event_base * base = event_base_new();
// Create dummy event to maintain loop.
event_base_add_virtual(base);
// Create arguments for the loop
*loop = malloc(sizeof(**loop));
(*loop)->base = base;
(*loop)->onError = onError;
(*loop)->onTimeOut = onDidTimeout;
(*loop)->communicator = communicator;
// Create thread
pthread_create(&(*loop)->loopThread, NULL, CBStartEventLoop, *loop);
return loop;
}
bool CBSocketBind(int * sock, bool IPv6, uint16_t port);
bool CBSocketBind(int * sock, bool IPv6, uint16_t port){
struct addrinfo hints, *res, *ptr;
// Set hints for the computer's addresses.
memset(&hints, 0, sizeof(hints));
hints.ai_flags = AI_PASSIVE;
hints.ai_family = IPv6 ? AF_INET6 : AF_INET;
hints.ai_socktype = SOCK_STREAM;
// Get host for listening
char portStr[6];
sprintf(portStr, "%u", port);
if (getaddrinfo(NULL, portStr, &hints, &res))
return false;
// Attempt to bind to one of the addresses.
for(ptr = res; ptr != NULL; ptr = ptr->ai_next) {
if ((*sock = socket(ptr->ai_family, ptr->ai_socktype, ptr->ai_protocol)) == -1)
continue;
// Prevent EADDRINUSE
int opt = 1;
setsockopt(*sock, SOL_SOCKET, SO_REUSEADDR, &opt, sizeof(opt));
if (bind(*sock, ptr->ai_addr, ptr->ai_addrlen) == -1) {
printf("Bind gave the error %s for address on port %u.\n", strerror(errno), port);
evutil_closesocket(*sock);
continue;
}
break; // Success.
}
freeaddrinfo(res);
if (ptr == NULL) // Failure
return false;
// Prevent SIGPIPE
int i = 1;
setsockopt(*sock, SOL_SOCKET, SO_NOSIGPIPE, &i, sizeof(i));
// Make socket non-blocking
evutil_make_socket_nonblocking(*sock);
return true;
}
void CBCanAccept(evutil_socket_t sock, short eventNum, void * arg);
void CBCanAccept(evutil_socket_t sock, short eventNum, void * arg){
CBEvent * event = arg;
event->onEvent.i(event->loop->communicator, sock);
}
bool CBSocketCanAcceptEvent(CBEvent ** event, CBEventLoop * loop, int sock, void (*onCanAccept)(void *, int));
bool CBSocketCanAcceptEvent(CBEvent ** event, CBEventLoop * loop, int sock, void (*onCanAccept)(void *, int)){
*event = malloc(sizeof(**event));
(*event)->loop = loop;
(*event)->onEvent.i = onCanAccept;
(*event)->event = event_new((*event)->loop->base, sock, EV_READ|EV_PERSIST, CBCanAccept, *event);
return true;
}
bool CBSocketAddEvent(CBEvent * event, uint32_t timeout);
bool CBSocketAddEvent(CBEvent * event, uint32_t timeout){
int res;
if (timeout) {
uint32_t secs = timeout / 1000;
struct timeval time = {secs, (timeout - secs*1000) * 1000};
res = event_add(event->event, &time);
}else
res = event_add(event->event, NULL);
return ! res;
}
bool CBNewSocket(int * sock, bool IPv6);
bool CBNewSocket(int * sock, bool IPv6){
// You need to use PF_INET for IPv4 mapped IPv6 addresses despite using the IPv6 format.
*sock = socket(IPv6 ? PF_INET6 : PF_INET, SOCK_STREAM, 0);
if (*sock == -1)
return false;
// Stop SIGPIPE annoying us.
int i = 1;
if (CB_NOSIGPIPE)
setsockopt(*sock, SOL_SOCKET, SO_NOSIGPIPE, &i, sizeof(i));
// Make address reusable
setsockopt(*sock, SOL_SOCKET, SO_REUSEADDR, &i, sizeof(i));
// Make socket non-blocking
evutil_make_socket_nonblocking(*sock);
return true;
}
bool CBSocketConnect(int sock, uint8_t * IP, bool IPv6, uint16_t port);
bool CBSocketConnect(int sock, uint8_t * IP, bool IPv6, uint16_t port){
// Create sockaddr_in6 information for a IPv6 address
int res;
if (IPv6) {
struct sockaddr_in6 address;
memset(&address, 0, sizeof(address)); // Clear structure.
address.sin6_family = AF_INET6;
memcpy(&address.sin6_addr, IP, 16); // Move IP address into place.
address.sin6_port = htons(port); // Port number to network order
res = connect(sock, (struct sockaddr *)&address, sizeof(address));
}else{
struct sockaddr_in address;
memset(&address, 0, sizeof(address)); // Clear structure.
address.sin_family = AF_INET;
memcpy(&address.sin_addr, IP + 12, 4); // Move IP address into place. Last 4 bytes for IPv4.
address.sin_port = htons(port); // Port number to network order
res = connect(sock, (struct sockaddr *)&address, sizeof(address));
}
if (res < 0 && errno == EINPROGRESS)
return true;
return false;
}
void CBDidConnect(evutil_socket_t socketID, short eventNum, void * arg);
void CBDidConnect(evutil_socket_t socketID, short eventNum, void * arg){
CBEvent * event = arg;
if (eventNum & EV_TIMEOUT) {
// Timeout for the connection
event->loop->onTimeOut(event->loop->communicator, event->peer);
}else{
int optval = -1;
socklen_t optlen = sizeof(optval);
getsockopt(socketID, SOL_SOCKET, SO_ERROR, &optval, &optlen);
if (optval){
// Act as timeout
printf("Connection error: %s\n", strerror(optval));
event->loop->onTimeOut(event->loop->communicator, event->peer);
}else
// Connection successful
event->onEvent.ptr(event->loop->communicator, event->peer);
}
}
bool CBSocketDidConnectEvent(CBEvent ** event, CBEventLoop * loop, int sock, void (*onDidConnect)(void *, void *), void * peer);
bool CBSocketDidConnectEvent(CBEvent ** event, CBEventLoop * loop, int sock, void (*onDidConnect)(void *, void *), void * peer){
*event = malloc(sizeof(**event));
(*event)->loop = loop;
(*event)->onEvent.ptr = onDidConnect;
(*event)->peer = peer;
(*event)->event = event_new((*event)->loop->base, sock, EV_TIMEOUT|EV_WRITE, CBDidConnect, *event);
return true;
}
int main(int argc, const char * argv[]){
int listeningSocket, connSocket;
CBEvent *acceptEvent, *connectEvent;
CBEventLoop *listeningEventLoop, *connEventLoop;
if (!CBNewEventLoop(&listeningEventLoop, loopErr, timeout, NULL)
|| !CBNewEventLoop(&connEventLoop, loopErr, timeout, NULL)){
printf("Unable to start event loops.");
return EXIT_FAILURE;
}
if (!CBSocketBind(&listeningSocket, false, 45564)){
printf("Unable to bind a socket for listening");
return EXIT_FAILURE;
}
if (!CBSocketCanAcceptEvent(&acceptEvent, listeningEventLoop, listeningSocket, acceptConn)) {
printf("Unable to create an accept event");
return EXIT_FAILURE;
}
if(!CBSocketAddEvent(acceptEvent, 0)){
printf("Unable to add an accept event\n");
return EXIT_FAILURE;
}
if (listen(listeningSocket, 1) == -1){
printf("Unable to start listening\n");
return EXIT_FAILURE;
}
// Make socket
if (!CBNewSocket(&connSocket, false)){
printf("Socket create fail\n");
return EXIT_FAILURE;
}
// Add event for connection
if (!CBSocketDidConnectEvent(&connectEvent, connEventLoop, connSocket, didConnect, NULL)) {
printf("Couldn't create did connect event\n");
return EXIT_FAILURE;
}
if (!CBSocketAddEvent(connectEvent, 1000)) {
printf("Couldn't add connect event\n");
return EXIT_FAILURE;
}
// Connect
if (!CBSocketConnect(connSocket, (uint8_t []){0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0xFF, 0xFF, 127, 0, 0, 1}, false, 45564)){
printf("Couldn't connect\n");
return EXIT_FAILURE;
}
pthread_exit(NULL);
return 0;
}
これを実行すると、次のようになります。
Starting network event loop.
Starting network event loop.
何もありません。受け入れる接続も、タイムアウトも、何もありません。ただし、これが Linux Mint 13 で動作することを確認できます。別のポート番号も試しましたが、うまくいきませんでした。
編集: libev で同様の問題が発生しているようです。libev を使用してコードを再実装しようとしたところ、同じ問題が発生しました。ただし、上記の小さな例をlibevに変更しようとはしていません。