1

シタラアームLinux 6用のカップ1.7.0をクロスコンパイルしました

私はついていきます

./configure --host=arm-linux-gnueabihf --disable-gssapi --prefix=/media/rootfs
make 
make install

すべての cups 関連ファイルは自動的に SD カードに保存されますが、cupsd コマンドを入力して cups サーバーを起動しないとエラーが表示されます。

cupsd: Child exited on signal 1.

/etc/cups/cupsd.conf を確認すると、構成ファイル内のいくつかのパスが

/media/rootfs/var/run/cups/cups.sock

それ以外の

/var/run/cups/cups.sock

1) --prefix なしで、このコンパイルされたカップをターゲットボードにインストールする方法は? 2) クロス コンパイルに欠けているステップはありますか?

どんな助けでも感謝します。

これはメイクファイルです

#
# "$Id: Makefile 11107 2013-07-08 13:47:51Z msweet $"
#
#   Top-level Makefile for CUPS.
#
#   Copyright 2007-2013 by Apple Inc.
#   Copyright 1997-2007 by Easy Software Products, all rights reserved.
#
#   These coded instructions, statements, and computer programs are the
#   property of Apple Inc. and are protected by Federal copyright
#   law.  Distribution and use rights are outlined in the file "LICENSE.txt"
#   which should have been included with this file.  If this file is
#   file is missing or damaged, see the license at "http://www.cups.org/".
#

include Makedefs


#
# Directories to make...
#

DIRS    =   cups test $(BUILDDIRS)


#
# Make all targets...
#

all:
    chmod +x cups-config
    echo Using ARCHFLAGS="$(ARCHFLAGS)"
    echo Using ALL_CFLAGS="$(ALL_CFLAGS)"
    echo Using ALL_CXXFLAGS="$(ALL_CXXFLAGS)"
    echo Using CC="$(CC)"
    echo Using CXX="$(CC)"
    echo Using DSOFLAGS="$(DSOFLAGS)"
    echo Using LDFLAGS="$(LDFLAGS)"
    echo Using LIBS="$(LIBS)"
    for dir in $(DIRS); do\
        echo Making all in $$dir... ;\
        (cd $$dir ; $(MAKE) $(MFLAGS) all $(UNITTESTS)) || exit 1;\
    done


#
# Make library targets...
#

libs:
    echo Using ARCHFLAGS="$(ARCHFLAGS)"
    echo Using ALL_CFLAGS="$(ALL_CFLAGS)"
    echo Using ALL_CXXFLAGS="$(ALL_CXXFLAGS)"
    echo Using CC="$(CC)"
    echo Using CXX="$(CC)"
    echo Using DSOFLAGS="$(DSOFLAGS)"
    echo Using LDFLAGS="$(LDFLAGS)"
    echo Using LIBS="$(LIBS)"
    for dir in $(DIRS); do\
        echo Making libraries in $$dir... ;\
        (cd $$dir ; $(MAKE) $(MFLAGS) libs) || exit 1;\
    done


#
# Make unit test targets...
#

unittests:
    echo Using ARCHFLAGS="$(ARCHFLAGS)"
    echo Using ALL_CFLAGS="$(ALL_CFLAGS)"
    echo Using ALL_CXXFLAGS="$(ALL_CXXFLAGS)"
    echo Using CC="$(CC)"
    echo Using CXX="$(CC)"
    echo Using DSOFLAGS="$(DSOFLAGS)"
    echo Using LDFLAGS="$(LDFLAGS)"
    echo Using LIBS="$(LIBS)"
    for dir in $(DIRS); do\
        echo Making all in $$dir... ;\
        (cd $$dir ; $(MAKE) $(MFLAGS) unittests) || exit 1;\
    done


#
# Remove object and target files...
#

clean:
    for dir in $(DIRS); do\
        echo Cleaning in $$dir... ;\
        (cd $$dir; $(MAKE) $(MFLAGS) clean) || exit 1;\
    done


#
# Remove all non-distribution files...
#

distclean:  clean
    $(RM) Makedefs config.h config.log config.status
    $(RM) cups-config
    $(RM) conf/cupsd.conf conf/mime.convs conf/pam.std conf/snmp.conf
    $(RM) doc/help/ref-cupsd-conf.html doc/help/standard.html doc/index.html
    $(RM) man/client.conf.man
    $(RM) man/cups-deviced.man man/cups-driverd.man
    $(RM) man/cups-lpd.man man/cupsaddsmb.man man/cupsd.man
    $(RM) man/cupsd.conf.man man/drv.man man/lpoptions.man
    $(RM) packaging/cups.list
    $(RM) packaging/cups-desc.plist packaging/cups-info.plist
    $(RM) templates/header.tmpl
    $(RM) desktop/cups.desktop
    $(RM) scheduler/cups.sh scheduler/cups-lpd.xinetd
    $(RM) scheduler/org.cups.cups-lpd.plist scheduler/cups.xml
    -$(RM) doc/*/index.html
    -$(RM) templates/*/header.tmpl
    -$(RM) -r autom4te*.cache clang cups/charmaps cups/locale driver/test


#
# Make dependencies
#

depend:
    for dir in $(DIRS); do\
        echo Making dependencies in $$dir... ;\
        (cd $$dir; $(MAKE) $(MFLAGS) depend) || exit 1;\
    done


#
# Run the clang.llvm.org static code analysis tool on the C sources.
# (at least checker-231 is required for scan-build to work this way)
#

.PHONY: clang clang-changes
clang:
    $(RM) -r clang
    scan-build -V -k -o `pwd`/clang $(MAKE) $(MFLAGS) clean all
clang-changes:
    scan-build -V -k -o `pwd`/clang $(MAKE) $(MFLAGS) all


#
# Generate a ctags file...
#

ctags:
    ctags -R .


#
# Install everything...
#

install:    install-data install-headers install-libs install-exec


#
# Install data files...
#

install-data:
    echo Making all in cups...
    (cd cups; $(MAKE) $(MFLAGS) all)
    for dir in $(DIRS); do\
        echo Installing data files in $$dir... ;\
        (cd $$dir; $(MAKE) $(MFLAGS) install-data) || exit 1;\
    done
    echo Installing cups-config script...
    $(INSTALL_DIR) -m 755 $(BINDIR)
    $(INSTALL_SCRIPT) cups-config $(BINDIR)/cups-config


#
# Install header files...
#

install-headers:
    for dir in $(DIRS); do\
        echo Installing header files in $$dir... ;\
        (cd $$dir; $(MAKE) $(MFLAGS) install-headers) || exit 1;\
    done
    if test "x$(privateinclude)" != x; then \
        echo Installing config.h into $(PRIVATEINCLUDE)...; \
        $(INSTALL_DIR) -m 755 $(PRIVATEINCLUDE); \
        $(INSTALL_DATA) config.h $(PRIVATEINCLUDE)/config.h; \
    fi


#
# Install programs...
#

install-exec:   all
    for dir in $(DIRS); do\
        echo Installing programs in $$dir... ;\
        (cd $$dir; $(MAKE) $(MFLAGS) install-exec) || exit 1;\
    done


#
# Install libraries...
#

install-libs:   libs
    for dir in $(DIRS); do\
        echo Installing libraries in $$dir... ;\
        (cd $$dir; $(MAKE) $(MFLAGS) install-libs) || exit 1;\
    done


#
# Uninstall object and target files...
#

uninstall:
    for dir in $(DIRS); do\
        echo Uninstalling in $$dir... ;\
        (cd $$dir; $(MAKE) $(MFLAGS) uninstall) || exit 1;\
    done
    echo Uninstalling cups-config script...
    $(RM) $(BINDIR)/cups-config
    -$(RMDIR) $(BINDIR)


#
# Run the test suite...
#

test:   all unittests
    echo Running CUPS test suite...
    cd test; ./run-stp-tests.sh


check:  all unittests
    echo Running CUPS test suite with defaults...
    cd test; ./run-stp-tests.sh 1 0 n n

debugcheck: all unittests
    echo Running CUPS test suite with debug printfs...
    cd test; ./run-stp-tests.sh 1 0 n y


#
# Create HTML documentation using Mini-XML's mxmldoc (http://www.msweet.org/)...
#

apihelp:
    for dir in cgi-bin cups filter ppdc scheduler; do\
        echo Generating API help in $$dir... ;\
        (cd $$dir; $(MAKE) $(MFLAGS) apihelp) || exit 1;\
    done

framedhelp:
    for dir in cgi-bin cups filter ppdc scheduler; do\
        echo Generating framed API help in $$dir... ;\
        (cd $$dir; $(MAKE) $(MFLAGS) framedhelp) || exit 1;\
    done


#
# Create an Xcode docset using Mini-XML's mxmldoc (http://www.msweet.org/)...
#

docset: apihelp
    echo Generating docset directory tree...
    $(RM) -r org.cups.docset
    mkdir -p org.cups.docset/Contents/Resources/Documentation/help
    mkdir -p org.cups.docset/Contents/Resources/Documentation/images
    cd man; $(MAKE) $(MFLAGS) html
    cd doc; $(MAKE) $(MFLAGS) docset
    cd cgi-bin; $(MAKE) $(MFLAGS) makedocset
    cgi-bin/makedocset org.cups.docset \
        `svnversion . | sed -e '1,$$s/[a-zA-Z]//g'` \
        doc/help/api-*.tokens
    $(RM) doc/help/api-*.tokens
    echo Indexing docset...
    /Applications/Xcode.app/Contents/Developer/usr/bin/docsetutil index org.cups.docset
    echo Generating docset archive and feed...
    $(RM) org.cups.docset.atom
    /Applications/Xcode.app/Contents/Developer/usr/bin/docsetutil package --output org.cups.docset.xar \
        --atom org.cups.docset.atom \
        --download-url http://www.cups.org/org.cups.docset.xar \
        org.cups.docset


#
# Lines of code computation...
#

sloc:
    for dir in cups scheduler; do \
        (cd $$dir; $(MAKE) $(MFLAGS) sloc) || exit 1;\
    done


#
# Make software distributions using EPM (http://www.msweet.org/)...
#

EPMFLAGS    =   -v --output-dir dist $(EPMARCH)

aix bsd deb depot inst pkg setld slackware swinstall tardist:
    epm $(EPMFLAGS) -f $@ cups packaging/cups.list

epm:
    epm $(EPMFLAGS) -s packaging/installer.gif cups packaging/cups.list

rpm:
    epm $(EPMFLAGS) -f rpm -s packaging/installer.gif cups packaging/cups.list

.PHONEY:    dist
dist:   all
    $(RM) -r dist
    $(MAKE) $(MFLAGS) epm
    case `uname` in \
        *BSD*) $(MAKE) $(MFLAGS) bsd;; \
        Darwin*) $(MAKE) $(MFLAGS) osx;; \
        Linux*) test ! -x /usr/bin/rpm || $(MAKE) $(MFLAGS) rpm;; \
        SunOS*) $(MAKE) $(MFLAGS) pkg;; \
    esac


#
# Don't run top-level build targets in parallel...
#

.NOTPARALLEL:


#
# End of "$Id: Makefile 11107 2013-07-08 13:47:51Z msweet $".
#
4

2 に答える 2

0

cupsd: Child exited on signal 1.

このエラーはhardcoding of paths、rootfs で作成して、インストール済みの実行可能ファイルを同じディレクトリに配置することで回避できます。

上記の 1) を回避する方法は 2 つありprefixます。プレフィックスで述べたように、このスタンドアロン実行可能ファイルのコピーのプレフィックスと 同じ名前でディレクトリを作成 します。$HOME/cupsstandalone$HOME/cupsrootfs

e.g --prefix=/home/vinay/cups then make same directory path in your rootfs /home/vinay/cups and copy all your executables here.

2番目の方法については、qtプロジェクトで試してみてうまくいったので、うまくいくかどうかわかりません。sysroot

2)provide option --sysroot=/media/rootfs --prefix=/media/rootfs so that while executing ypur executables executable look correctly search the path with help of sysroot.

于 2013-11-08T10:27:54.493 に答える