88

歴史書では、出来事と期間が互いに正しい相対距離で線上にマークされているタイムラインを持っていることがよくあります. LaTeX で同様のものを作成するにはどうすればよいですか?

4

9 に答える 9

83

Levi Wisemanによる新しいchronology.styがあります。ドキュメント(pdf)には次のように書かれています:

LATEX のほとんどのタイムライン パッケージとソリューションは、多くの情報を伝達するために使用されるため、垂直に設計されています。ラベルを日付に割り当てようとしているだけの場合は、従来のタイムラインの方が適している可能性があります。それが年表の目的です。

コード例を次に示します。

\documentclass{article}
\usepackage{chronology}
\begin{document}

\begin{chronology}[5]{1983}{2010}{3ex}[\textwidth]
\event{1984}{one}
\event[1985]{1986}{two}
\event{\decimaldate{25}{12}{2001}}{three}
\end{chronology}

\end{document}

次の出力が生成されます。

chronology.sty からの出力例

于 2010-12-10T01:41:20.070 に答える
53

tikzパッケージには、必要なものが含まれているようです。

\documentclass{article}
\usepackage{tikz}
\usetikzlibrary{snakes}

\begin{document}

  \begin{tikzpicture}[snake=zigzag, line before snake = 5mm, line after snake = 5mm]
    % draw horizontal line   
    \draw (0,0) -- (2,0);
    \draw[snake] (2,0) -- (4,0);
    \draw (4,0) -- (5,0);
    \draw[snake] (5,0) -- (7,0);

    % draw vertical lines
    \foreach \x in {0,1,2,4,5,7}
      \draw (\x cm,3pt) -- (\x cm,-3pt);

    % draw nodes
    \draw (0,0) node[below=3pt] {$ 0 $} node[above=3pt] {$   $};
    \draw (1,0) node[below=3pt] {$ 1 $} node[above=3pt] {$ 10 $};
    \draw (2,0) node[below=3pt] {$ 2 $} node[above=3pt] {$ 20 $};
    \draw (3,0) node[below=3pt] {$  $} node[above=3pt] {$  $};
    \draw (4,0) node[below=3pt] {$ 5 $} node[above=3pt] {$ 50 $};
    \draw (5,0) node[below=3pt] {$ 6 $} node[above=3pt] {$ 60 $};
    \draw (6,0) node[below=3pt] {$  $} node[above=3pt] {$  $};
    \draw (7,0) node[below=3pt] {$ n $} node[above=3pt] {$ 10n $};
  \end{tikzpicture}

\end{document}

私はtikzの専門家ではありませんが、これは次のような良いタイムラインを提供します:

ここに画像の説明を入力

于 2008-10-20T17:40:12.830 に答える
25

また、パッケージchronosysは優れたソリューションを提供します。ユーザーマニュアルの例を次に示します。

ここに画像の説明を入力

于 2013-07-25T12:06:59.587 に答える
16

ただの更新。

現在のTiKZパッケージは次のように発行されます。パッケージtikz警告:ヘビは装飾に取って代わられました。入力行のヘビライブラリの代わりに装飾ライブラリを使用してください。。。

したがって、コードの関連部分を次のように変更する必要があります。

\documentclass{article}
\usepackage{tikz}
\usetikzlibrary{decorations}
\begin{document}
\begin{tikzpicture}
%draw horizontal line
\draw (0,0) -- (2,0);
\draw[decorate,decoration={snake,pre length=5mm, post length=5mm}] (2,0) -- (4,0);
\draw (4,0) -- (5,0);
\draw[decorate,decoration={snake,pre length=5mm, post length=5mm}] (5,0) -- (7,0);

%draw vertical lines
\foreach \x in {0,1,2,4,5,7}
\draw (\x cm,3pt) -- (\x cm,-3pt);

%draw nodes
\draw (0,0) node[below=3pt] {$ 0 $} node[above=3pt] {$   $};
\draw (1,0) node[below=3pt] {$ 1 $} node[above=3pt] {$ 10 $};
\draw (2,0) node[below=3pt] {$ 2 $} node[above=3pt] {$ 20 $};
\draw (3,0) node[below=3pt] {$  $} node[above=3pt] {$  $};
\draw (4,0) node[below=3pt] {$ 5 $} node[above=3pt] {$ 50 $};
\draw (5,0) node[below=3pt] {$ 6 $} node[above=3pt] {$ 60 $};
\draw (6,0) node[below=3pt] {$  $} node[above=3pt] {$  $};
\draw (7,0) node[below=3pt] {$ n $} node[above=3pt] {$ 10n $};
\end{tikzpicture}

\end{document}

HTH

于 2010-11-13T04:31:25.663 に答える
15

Tim Storerは、より柔軟で見栄えの良いものを書きましたtimeline.sty(オリジナルがなくなったため、Internet Archive Wayback Machine リンク)。さらに、ラインは垂直ではなく水平です。たとえば、次のようになります。

\begin{timeline}{2008}{2010}{50}{250}
  \MonthAndYearEvent{4}{2008}{First Podcast}
  \MonthAndYearEvent{7}{2008}{Private Beta}
  \MonthAndYearEvent{9}{2008}{Public Beta}
  \YearEvent{2009}{IPO?}
\end{timeline}

次のようなタイムラインが生成されます。

2008                              2010
 · · April, 2008 First Podcast    ·
       · July, 2008 Private Beta
           · September, 2008 Public Beta
                · 2009 IPO?

個人的には、これは他の回答よりも楽しい解決策だと思います。しかし、自分が考えているタイムラインに近づけるためにコードを修正していることにも気付きました。したがって、私の意見では決定的な解決策はありません。

于 2009-06-05T19:44:52.063 に答える
12

tikz第一に、ガイド付きソリューションの方が自由度が高いため、私はガイド付きソリューションを好みます。第二に、まったく新しいものを投稿しているわけではありません。彼が道を示したので、それは明らかにZoe Gagnonの答えに似ています.

数年のタイムラインが必要でしたが、それを行うのに時間がかかりました (なんて驚きです!) ので、結果を共有します. 気に入っていただけると幸いです。

\documentclass[tikz]{standalone}
\usepackage{verbatim}
\begin{document}
\newlength\yearposx
\begin{tikzpicture}[scale=0.57] % timeline 1990-2010->
    % define coordinates (begin, used, end, arrow)
    \foreach \x in {1990,1992,2000,2002,2004,2005,2008,2009,2010,2011}{
        \pgfmathsetlength\yearposx{(\x-1990)*1cm};
        \coordinate (y\x)   at (\yearposx,0);
        \coordinate (y\x t) at (\yearposx,+3pt);
        \coordinate (y\x b) at (\yearposx,-3pt);
    }
    % draw horizontal line with arrow
    \draw [->] (y1990) -- (y2011);
    % draw ticks
   \foreach \x in {1992,2000,2002,2004,2005,2008,2009}
        \draw (y\x t) -- (y\x b);
    % annotate
    \foreach \x in {1992,2002,2005,2009}
        \node at (y\x) [below=3pt] {\x};
    \foreach \x in {2000,2004,2008}
        \node at (y\x) [above=3pt] {\x};
    \begin{comment}
    % for use in beamer class
    \only<2>    {\fill      (y1992) circle (5pt);}
    \only<3-5>  {\fill      (y2000) circle (5pt);}
    \only<4-5>  {\fill      (y2002) circle (5pt);}
    \only<5>    {\fill[red] (y2004) circle (5pt);}
    \only<6>    {\fill      (y2005) circle (5pt);}
    \only<7>    {\fill[red] (y2005) circle (5pt);}
    \only<8-11> {\fill      (y2008) circle (5pt);}
    \only<11>   {\fill      (y2009) circle (5pt);}
    \end{comment}
\end{tikzpicture}
\end{document}

ご覧のとおり、これはビーマー プレゼンテーションに合わせて調整されています (一部を選択し、オプションもスケーリングします)。しかし、本当にプレゼンテーションでテストしたい場合\newlength\yearposxは、フレーム定義の外に移動する必要があります。そのコマンド\yearposxは既に定義されています (フレームから選択部分とその他のフレーム分割コマンドを削除しない限り)。

ここに画像の説明を入力

于 2010-03-15T00:06:52.410 に答える
4

浮かんでいるのは、timeline.styです。

構文は、tikz を使用するよりも簡単です。

%%% In LaTeX:
%%% \begin{timeline}{length}(start,stop)
%%%   .
%%%   .
%%%   .
%%% \end{timeline}
%%%
%%% in plain TeX
%%% \timeline{length}(start,stop)
%%%   .
%%%   .
%%%   .
%%% \endtimeline
%%% in between the two, we may have:
%%% \item{date}{description}
%%% \item[sortkey]{date}{description}
%%% \optrule
%%%
%%% the options to timeline are:
%%%      length The amount of vertical space that the timeline should
%%%                use.
%%%      (start,stop) indicate the range of the timeline. All dates or
%%%                sortkeys should lie in the range [start,stop]
%%%
%%% \item without the sort key expects date to be a number (such as a
%%%      year).
%%% \item with the sort key expects the sort key to be a number; date
%%%      can be anything. This can be used for log scale time lines
%%%      or dates that include months or days.
%%% putting \optrule inside of the timeline environment will cause a
%%%      vertical rule to be drawn down the center of the timeline.

パッケージのコンテキストで日付を「ソートキー」に変換するために、pythonのdatetime.data.toordinalを使用しました。

于 2009-04-08T09:12:45.713 に答える
2

UML シーケンス図を探している場合は、 TiKZ に基づくpkf-umlsdに興味があるかもしれません。素敵なデモはここにあります。

于 2009-06-26T10:12:13.003 に答える