sakai 10 用の clog tool のコンパイルに少し手こずっています...
https://github.com/adrianfish/clog/issues/5
現在、エイドリアンは 11 ビルドで忙しいのではないかと思いますが、実際にユーザーが修正できるものなのか、それとも他の人がこれに遭遇して、私が知らない単純なことを行っているのか疑問に思っています.. ?
基本的に、clog の現在の安定版 (0.9.3 - https://confluence.sakaiproject.org/display/CLOG/Home ) は、sakai 10 コード ベース用にコンパイルされません。関連する問題 (CLOG -113) ここで...
https://github.com/adrianfish/clog/pull/3
しかし、clog の sakai-10 ブランチ ( https://github.com/adrianfish/clog/tree/sakai-10 )をコンパイルするとエラーが発生するため、maven の sakai-10 リポジトリが存在するかどうかはわかりません。次のとおりです。
bash-3.2$ mvn clean install
[INFO] Scanning for projects...
[ERROR] The build could not read 1 project -> [Help 1]
[ERROR]
[ERROR] The project org.sakaiproject.clog:clog:0.9.5-SNAPSHOT (/usr/local/sakai/sakai-src-10.0/clog-0.9.5-sakai-10branch/pom.xml) has 1 error
[ERROR] Non-resolvable parent POM: Could not find artifact org.sakaiproject:master:pom:10.0-SNAPSHOT and 'parent.relativePath' points at wrong local POM @ line 12, column 13 -> [Help 2]
[ERROR]
[ERROR] To see the full stack trace of the errors, re-run Maven with the -e switch.
[ERROR] Re-run Maven using the -X switch to enable full debug logging.
[ERROR]
[ERROR] For more information about the errors and possible solutions, please read the following articles:
[ERROR] [Help 1] http://cwiki.apache.org/confluence/display/MAVEN/ProjectBuildingException
[ERROR] [Help 2] http://cwiki.apache.org/confluence/display/MAVEN/UnresolvableModelException
sakai 10 でコンパイルするために clog を取得できた人はいますか? これは、sakai 10 の展開を少し妨げるものです :(
編集：（解決策については「さらに編集」も参照してください）
以下の提案 ( https://stackoverflow.com/a/24769111/3737856 ) を試した後、このエラーが発生します
*---snip---*
Downloaded: http://repo1.maven.org/maven2/org/apache/commons/commons-parent/17/commons-parent-17.pom (31 KB at 507.6 KB/sec)
Downloading: http://repo1.maven.org/maven2/org/apache/apache/7/apache-7.pom
Downloaded: http://repo1.maven.org/maven2/org/apache/apache/7/apache-7.pom (15 KB at 320.3 KB/sec)
Downloading: http://repo1.maven.org/maven2/org/projectlombok/lombok/0.11.6/lombok-0.11.6.pom
Downloaded: http://repo1.maven.org/maven2/org/projectlombok/lombok/0.11.6/lombok-0.11.6.pom (2 KB at 34.0 KB/sec)
[INFO] ------------------------------------------------------------------------
[INFO] Reactor Summary:
[INFO]
[INFO] CLOG .............................................. SUCCESS [ 7.693 s]
[INFO] CLOG API .......................................... FAILURE [ 3.520 s]
[INFO] CLOG IMPL ......................................... SKIPPED
[INFO] CLOG PACK ......................................... SKIPPED
[INFO] CLOG HELP ......................................... SKIPPED
[INFO] CLOG TOOL ......................................... SKIPPED
[INFO] ------------------------------------------------------------------------
[INFO] BUILD FAILURE
[INFO] ------------------------------------------------------------------------
[INFO] Total time: 17.166 s
[INFO] Finished at: 2014-07-16T10:11:38+00:00
[INFO] Final Memory: 10M/59M
[INFO] ------------------------------------------------------------------------
[ERROR] Failed to execute goal on project clog-api: Could not resolve dependencies for project org.sakaiproject.clog:clog-api:jar:0.9.5-SNAPSHOT: Failed to collect depend encies at org.sakaiproject.kernel:sakai-kernel-api:jar:10.0: Failed to read artifact descriptor for org.sakaiproject.kernel:sakai-kernel-api:jar:10.0: Could not find arti fact org.sakaiproject:kernel:pom:10.0 in central (http://repo1.maven.org/maven2) -> [Help 1]
[ERROR]
[ERROR] To see the full stack trace of the errors, re-run Maven with the -e switch.
[ERROR] Re-run Maven using the -X switch to enable full debug logging.
[ERROR]
[ERROR] For more information about the errors and possible solutions, please read the following articles:
[ERROR] [Help 1] http://cwiki.apache.org/confluence/display/MAVEN/DependencyResolutionException
[ERROR]
[ERROR] After correcting the problems, you can resume the build with the command
[ERROR] mvn <goals> -rf :clog-api
ソースから現在の sakai 10 リリース ビルドをビルドし (マスター ディレクトリをビルドしてからルート)、clog ソースをルートに配置してそこにビルドしました。これは通常機能します。
さらに、下駄ポンも変えてみました。
<name>CLOG</name>
<groupId>org.sakaiproject.clog</groupId>
<artifactId>clog</artifactId>
<version>0.9.5-SNAPSHOT</version>
<packaging>pom</packaging>
に：
<name>CLOG</name>
<groupId>org.sakaiproject.clog</groupId>
<artifactId>clog</artifactId>
<version>0.9.5</version>
<packaging>pom</packaging>
これと他の提案された変更を使用してビルドすると、次のエラーが発生しました。
-bash-3.2$ mvn clean install
[INFO] Scanning for projects...
Downloading: http://repo.maven.apache.org/maven2/org/sakaiproject/master/10.0/master-10.0.pom
Downloaded: http://repo.maven.apache.org/maven2/org/sakaiproject/master/10.0/master-10.0.pom (59 KB at 172.0 KB/sec)
[INFO] ------------------------------------------------------------------------
[INFO] Reactor Build Order:
[INFO]
[INFO] CLOG API
[INFO] CLOG IMPL
[INFO] CLOG PACK
[INFO] CLOG HELP
[INFO] CLOG TOOL
[INFO] CLOG
[INFO]
[INFO] Using the builder org.apache.maven.lifecycle.internal.builder.singlethreaded.SingleThreadedBuilder with a thread count of 1
[INFO]
[INFO] ------------------------------------------------------------------------
[INFO] Building CLOG API 0.9.5-SNAPSHOT
[INFO] ------------------------------------------------------------------------
[INFO] ------------------------------------------------------------------------
[INFO] Reactor Summary:
[INFO]
[INFO] CLOG API .......................................... FAILURE [ 1.374 s]
[INFO] CLOG IMPL ......................................... SKIPPED
[INFO] CLOG PACK ......................................... SKIPPED
[INFO] CLOG HELP ......................................... SKIPPED
[INFO] CLOG TOOL ......................................... SKIPPED
[INFO] CLOG .............................................. SKIPPED
[INFO] ------------------------------------------------------------------------
[INFO] BUILD FAILURE
[INFO] ------------------------------------------------------------------------
[INFO] Total time: 3.584 s
[INFO] Finished at: 2014-07-16T10:19:02+00:00
[INFO] Final Memory: 8M/59M
[INFO] ------------------------------------------------------------------------
[ERROR] Failed to execute goal on project clog-api: Could not resolve dependencies for project org.sakaiproject.clog:clog-api:jar:0.9.5-SNAPSHOT: Failed to collect dependencies at org.sakaiproject.kernel:sakai-kernel-api:jar:10.0: Failed to read artifact descriptor for org.sakaiproject.kernel:sakai-kernel-api:jar:10.0: Failure to find org.sakaiproject:kernel:pom:10.0 in http://repo1.maven.org/maven2 was cached in the local repository, resolution will not be reattempted until the update interval of central has elapsed or updates are forced -> [Help 1]
[ERROR]
[ERROR] To see the full stack trace of the errors, re-run Maven with the -e switch.
[ERROR] Re-run Maven using the -X switch to enable full debug logging.
[ERROR]
[ERROR] For more information about the errors and possible solutions, please read the following articles:
[ERROR] [Help 1] http://cwiki.apache.org/confluence/display/MAVEN/DependencyResolutionException
さらに...ダウンロードがmaven2リポジトリを参照していることに気付きました。違いはないと思います。間違いなくmaven3を使用しています...
-bash-3.2$ mvn -v
Apache Maven 3.2.1 (ea8b2b07643dbb1b84b6d16e1f08391b666bc1e9; 2014-02-14T17:37:52+00:00)
Maven home: /usr/local/maven2/current
Java version: 1.6.0_27, vendor: Sun Microsystems Inc.
Java home: /usr/local/java/jdk1.6.0_27/jre
Default locale: en_GB, platform encoding: UTF-8
OS name: "linux", version: "2.6.18-348.18.1.el5", arch: "amd64", family: "unix"
さらに編集：
D'OH!!!
現在は機能しています。提案された方法でのみpomを変更しました（10-SNAPSHOT-> 10）および->「ルートとしてコンパイル」<--以前に行っていたのは、非スーパーユーザーとしてコンパイルしていました。最初のビルドがルートでコンパイルされたか、どこかで権限が間違っていますが、clog は現在コンパイル中です。
pom の変更については、Adrian にプル リクエストを送信するつもりだと思いますが...