Vagrant 1.8.1 と VirtualBox 5.0 を搭載した CentOS x64 7.2 で pcf dev 0.15.0 を実行しています。
私が実行すると、 vagrant up(私には) すべてがうまく起動しているように見えます (ただし、実行中のサービスが 0 から 48 になるまでには数分かかります)。
PCF Dev has reserved 32 GB out of 46 GB total system memory.
Bringing machine 'default' up with 'virtualbox' provider...
==> default: Checking if box 'pcfdev/pcfdev' is up to date...
==> default: Clearing any previously set forwarded ports...
==> default: Clearing any previously set network interfaces...
==> default: Preparing network interfaces based on configuration...
default: Adapter 1: nat
default: Adapter 2: hostonly
==> default: Forwarding ports...
default: 22 (guest) => 2222 (host) (adapter 1)
==> default: Running 'pre-boot' VM customizations...
==> default: Booting VM...
==> default: Waiting for machine to boot. This may take a few minutes...
default: SSH address: 127.0.0.1:2222
default: SSH username: vagrant
default: SSH auth method: private key
default: Warning: Remote connection disconnect. Retrying...
default: Warning: Remote connection disconnect. Retrying...
==> default: Machine booted and ready!
==> default: Checking for guest additions in VM...
==> default: Configuring and enabling network interfaces...
==> default: Machine already provisioned. Run `vagrant provision` or use the `--provision`
==> default: flag to force provisioning. Provisioners marked to run always will still run.
==> default: Running provisioner: shell...
default: Running: inline script
==> default: stdin: is not a tty
==> default: Waiting for services to start...
==> default: 0 out of 48 running
==> default: 0 out of 48 running
==> default: 0 out of 48 running
==> default: 0 out of 48 running
==> default: 0 out of 48 running
==> default: 37 out of 48 running
==> default: 48 out of 48 running
==> default: PCF Dev is now running.
==> default: To begin using PCF Dev, please run:
==> default: cf login -a api.local.pcfdev.io --skip-ssl-validation
==> default: Email: admin
==> default: Password: admin
私はこれを変更せずに実行します。唯一の変更は、VM_MEMORYより多くのメモリを使用するために設定したことです (ログファイルの最初の行で結果を確認できます)。
これを使用してログインしようとするcf login -a api.local.pcfdev.io --skip-ssl-validation -vと解決できないため、ボックスに入ったifconfig後に表示される IP アドレスを使用します。vagrant ssh
eth0 Link encap:Ethernet HWaddr 08:00:27:6c:38:a8
inet addr:10.0.2.15 Bcast:10.0.2.255 Mask:255.255.255.0
inet6 addr: fe80::a00:27ff:fe6c:38a8/64 Scope:Link
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:823 errors:0 dropped:0 overruns:0 frame:0
TX packets:669 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:82923 (82.9 KB) TX bytes:83850 (83.8 KB)
eth1 Link encap:Ethernet HWaddr 08:00:27:02:34:18
inet addr:192.168.11.11 Bcast:192.168.11.255 Mask:255.255.255.0
inet6 addr: fe80::a00:27ff:fe02:3418/64 Scope:Link
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:32 errors:0 dropped:0 overruns:0 frame:0
TX packets:39 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:2955 (2.9 KB) TX bytes:4782 (4.7 KB)
これは、192.168.11.11cf で接続するときに使用した結果です。
API endpoint: 192.168.11.11
REQUEST: [2016-06-10T10:24:37+02:00]
GET /v2/info HTTP/1.1
Host: 192.168.11.11
Accept: application/json
Content-Type: application/json
User-Agent: go-cli 6.18.1+a1103f0 / linux
RESPONSE: [2016-06-10T10:24:37+02:00]
HTTP/1.1 404 Not Found
Content-Length: 65
Content-Type: text/plain; charset=utf-8
Date: Fri, 10 Jun 2016 08:24:37 GMT
X-Cf-Routererror: unknown_route
X-Content-Type-Options: nosniff
X-Vcap-Request-Id: ba181cbd-aaf3-43cf-4169-e2d7e42d19a5
404 Not Found: Requested route ('192.168.11.11') does not exist.
REQUEST: [2016-06-10T10:24:37+02:00]
GET /v2/info HTTP/1.1
Host: 192.168.11.11
Accept: application/json
Content-Type: application/json
User-Agent: go-cli 6.18.1+a1103f0 / linux
RESPONSE: [2016-06-10T10:24:37+02:00]
HTTP/1.1 404 Not Found
Content-Length: 65
Content-Type: text/plain; charset=utf-8
Date: Fri, 10 Jun 2016 08:24:37 GMT
X-Cf-Routererror: unknown_route
X-Content-Type-Options: nosniff
X-Vcap-Request-Id: 69d68148-17ca-4434-4562-4a6fd90d7984
404 Not Found: Requested route ('192.168.11.11') does not exist.
FAILED
Server error, status code: 404, error code: 0, message:
他の人も Windows で同様の問題を抱えているようです: https://github.com/pivotal-cf/pcfdev/issues/68