C ++アプリケーションで、32ビットLinuxから32ビットFreeBSD8.1への移植時に発生した障害が発生しました。接続に失敗するTCPソケット接続があります。connect（）の呼び出しで、connect（）のマニュアルページでカバーされていないerrno==EINVALのエラー結果が発生しました。
このエラーはどういう意味ですか、どの引数が無効ですか？メッセージには、「引数が無効です」とだけ書かれています。
接続の詳細は次のとおりです。
family: AF_INET
len: 16
port: 2357
addr: 10.34.49.13
ただし、常に失敗するとは限りません。FreeBSDバージョンは、マシンを数時間アイドル状態にした後にのみ失敗します。ただし、一度失敗した後は、長時間アイドル状態に戻すまで確実に機能します。
コードの一部を次に示します。
void setSocketOptions(const int skt);
void buildAddr(sockaddr_in &addr, const std::string &ip,
const ushort port);
void deepBind(const int skt, const sockaddr_in &addr);
void
test(const std::string &localHost, const std::string &remoteHost,
const ushort localPort, const ushort remotePort,
sockaddr_in &localTCPAddr, sockaddr_in &remoteTCPAddr)
{
const int skt = socket(AF_INET, SOCK_STREAM, 0);
if (0 > skt) {
clog << "Failed to create socket: (errno " << errno
<< ") " << strerror(errno) << endl;
throw;
}
setSocketOptions(skt);
// Build the localIp address and bind it to the feedback socket. Although
// it's not traditional for a client to bind the sending socket to a the
// local address, we do it to prevent connect() from using an ephemeral port
// which (our site's firewall may block). Also build the remoteIp address.
buildAddr(localTCPAddr, localHost, localPort);
deepBind(skt, localTCPAddr);
buildAddr(remoteTCPAddr, remoteHost, remotePort);
clog << "Info: Command connect family: "
<< (remoteTCPAddr.sin_family == AF_INET ? "AF_INET" : "<unknown>")
<< " len: " << int(remoteTCPAddr.sin_len)
<< " port: " << ntohs(remoteTCPAddr.sin_port)
<< " addr: " << inet_ntoa(remoteTCPAddr.sin_addr) << endl;
if (0 > ::connect(skt, (sockaddr*)& remoteTCPAddr, sizeof(sockaddr_in)))) {
switch (errno) {
case EINVAL: {
int value = -1;
socklen_t len = sizeof(value);
getsockopt(skt, SOL_SOCKET, SO_ERROR, &value, &len);
cerr << "Error: Command connect failed on local port "
<< getLocFbPort()
<< " and remote port " << remotePort
<< " to remote host '" << remoteHost
<< "' family: "
<< (remoteTCPAddr.sin_family == AF_INET ? "AF_INET" : "<unknown>")
<< " len: " << int(remoteTCPAddr.sin_len)
<< " port: " << ntohs(remoteTCPAddr.sin_port)
<< " addr: " << inet_ntoa(remoteTCPAddr.sin_addr)
<< ": Invalid argument." << endl;
cerr << "\tgetsockopt => "
<< ((value != 0) ? strerror(value): "success") << endl;
throw;
}
default: {
cerr << "Error: Command connect failed on local port "
<< localPort << " and remote port " << remotePort
<< ": (errno " << errno << ") " << strerror(errno) << endl;
throw;
}
}
}
}
void
setSocketOptions(int skt)
{
// See page 192 of UNIX Network Programming: The Sockets Networking API
// Volume 1, Third Edition by W. Richard Stevens et. al. for info on using
// ::setsockopt().
// According to "Linux Socket Programming by Example" p. 319, we must call
// setsockopt w/ SO_REUSEADDR option BEFORE calling bind.
int so_reuseaddr = 1; // Enabled.
int reuseAddrResult
= ::setsockopt(skt, SOL_SOCKET, SO_REUSEADDR, &so_reuseaddr,
sizeof(so_reuseaddr));
if (reuseAddrResult != 0) {
cerr << "Failed to set reuse addr on socket.";
throw;
}
// For every two hours of inactivity, a keepalive occurs.
int so_keepalive = 1; // Enabled. See page 200 for info on SO_KEEPALIVE.
int keepAliveResult =
::setsockopt(skt, SOL_SOCKET, SO_KEEPALIVE, &so_keepalive,
sizeof(so_keepalive));
if (keepAliveResult != 0) {
cerr << "Failed to set keep alive on socket.";
throw;
}
struct linger so_linger;
so_linger.l_onoff = 1; // Turn linger option on.
so_linger.l_linger = 5; // Linger time in seconds. (See page 202)
int lingerResult
= ::setsockopt(skt, SOL_SOCKET, SO_LINGER, &so_linger,
sizeof(so_linger));
if (lingerResult != 0) {
cerr << "Failed to set linger on socket.";
throw;
}
// Disable the Nagel algorithm on the command channel. SOL_TCP is not
// defined on FreeBSD
#ifndef SOL_TCP
#define SOL_TCP (::getprotobyname("TCP")->p_proto)
#endif
unsigned int tcpNoDelay = 1;
int noDelayResult
= ::setsockopt(skt, SOL_TCP, TCP_NODELAY, &tcpNoDelay,
sizeof(tcpNoDelay));
if (noDelayResult != 0) {
cerr << "Failed to set tcp no delay on socket.";
throw;
}
}
void
buildAddr(sockaddr_in &addr, const std::string &ip, const ushort port)
{
memset(&addr, 0, sizeof(sockaddr_in)); // Clear all fields.
addr.sin_len = sizeof(sockaddr_in);
addr.sin_family = AF_INET; // Set the address family
addr.sin_port = htons(port); // Set the port.
if (0 == inet_aton(ip.c_str(), &addr.sin_addr)) {
cerr << "BuildAddr IP.";
throw;
}
};
void
deepBind(const int skt, const sockaddr_in &addr)
{
// Bind the requested port.
if (0 <= ::bind(skt, (sockaddr *)&addr, sizeof(addr))) {
return;
}
// If the port is already in use, wait up to 100 seconds.
int count = 0;
ushort port = ntohs(addr.sin_port);
while ((errno == EADDRINUSE) && (count < 10)) {
clog << "Waiting for port " << port << " to become available..."
<< endl;
::sleep(10);
++count;
if (0 <= ::bind(skt, (sockaddr*)&addr, sizeof(addr))) {
return;
}
}
cerr << "Error: failed to bind port.";
throw;
}
EINVALの場合の出力例を次に示します（ここでは常に失敗するとは限りません。ソケットを介して送信された最初のパケットがスクランブルされたときに成功して失敗する場合があります）。
Info: Command connect family: AF_INET len: 16 port: 2357 addr: 10.34.49.13
Error: Command connect failed on local port 2355 and remote port 2357 to remote host '10.34.49.13' family: AF_INET len: 16 port: 2357 addr: 10.34.49.13: Invalid argument.
getsockopt => success