0

こんにちは、udpxy のようにマルチキャスト ビデオをユニキャストにプロキシしたかったのです: http://www.udpxy.comですが、使用できる適切な RTP ライブラリが見つからなかったため、C# で使用しました (複雑すぎるか、使用できませんでした)。それらの使用方法を理解する)、udpxy が rtp.c を使用するものを移植することにしました: https://github.com/pcherenkov/udpxy/blob/master/chipmunk/rtp.c

RTP_Process を C# に変換するまでは、すべてうまくいきました (ポインターを使用したくなかったため、ほとんどの場合)。

C言語のRTP_Process

RTP_process( void** pbuf, size_t* len, int verify, FILE* log )
{
    int rtp_padding = -1;
    size_t front_skip = 0, back_skip = 0, pad_len = 0;

    char* buf = NULL;
    size_t pkt_len = 0;

    assert( pbuf && len && log );
    buf = *pbuf;
    pkt_len = *len;

    if( verify && !RTP_verify( buf, pkt_len, log ) )
        return -1;

    if( 0 != RTP_hdrlen( buf, pkt_len, &front_skip, log ) )
        return -1;

    rtp_padding = buf[0] & 0x20;
    if( rtp_padding ) {
        pad_len = buf[ pkt_len - 1 ];
    }

    back_skip += pad_len;

    if( verify && (pkt_len < (front_skip + back_skip)) ) {
        (void) tmfprintf( log, "RTP_process: invalid header "
                "(skip [%lu] exceeds packet length [%lu])\n",
                (u_long)(front_skip + back_skip), (u_long)pkt_len );
        return -1;
    }

    /* adjust buffer/length to skip heading and padding */
    /*
    TRACE( (void)tmfprintf( log, "In: RTP buf=[%p] of [%lu] bytes, "
                "fskip=[%ld], bskip=[%lu]\n",
                (void*)buf, (u_long)pkt_len,
                (u_long)front_skip, (u_long)back_skip ) );
    */

    buf += front_skip;
    pkt_len -= (front_skip + back_skip);

    /*
    TRACE( (void)tmfprintf( log, "Out RTP buf=[%p] of [%lu] bytes\n",
                (void*)buf, (u_long)pkt_len ) );
    */
    *pbuf = buf;
    *len  = pkt_len;

    return 0;
}

C# の RTP_Process

public byte[] RTP_process(int verify)
{
    /* process RTP package to retrieve the payload: set
    * pbuf to the start of the payload area; set len to
    * be equal payload's length
    *
    * @param pbuf      address of pointer to beginning of RTP packet
    * @param len       pointer to RTP packet's length
    * @param verify    verify that it is an RTP packet if != 0
    * @param log       log file
    *
    * @return 0 if there was no error, -1 otherwise;
    *         set pbuf to point to beginning of payload and len
    *         be payload size in bytes
    */
    int rtp_padding = -1;
    int front_skip = 0, back_skip = 0, pad_len = 0;

    int pkt_len = 0;

    //assert(pbuf && len && log);
    //buf = *pbuf;
    pbuf = buf;
    //pkt_len = *len;
    len = pkt_len;

    /*
    if (verify != 1 && RTP_verify() != 1)
        RTPOK = - 1;

    if (0 != RTP_hdrlen(buf, pkt_len, front_skip)) //?????
        RTPOK = - 1;

    */

    rtp_padding = buf[0] & 0x20;
    if (rtp_padding != -1) //???????
    {
        pad_len = buf[pkt_len - 1];
    }

    back_skip += pad_len;

    if ((verify != -1) && (pkt_len < (front_skip + back_skip))) //???????
    {
        Console.WriteLine("RTP_process: invalid header (skip {0} exceeds packet length {1})\n", (long)(front_skip + back_skip), (long)pkt_len);
        RTPOK = - 1;
    }

    /* adjust buffer/length to skip heading and padding */
    /*
    TRACE( (void)tmfprintf( log, "In: RTP buf=[%p] of [%lu] bytes, "
                "fskip=[%ld], bskip=[%lu]\n",
                (void*)buf, (u_long)pkt_len,
                (u_long)front_skip, (u_long)back_skip ) );
    */

    //buf += front_skip;
    //pkt_len -= (front_skip + back_skip);

    /*
    TRACE( (void)tmfprintf( log, "Out RTP buf=[%p] of [%lu] bytes\n",
                (void*)buf, (u_long)pkt_len ) );
    */
    pbuf = buf;
    len = pkt_len;

    RTPOK = 0;
    return pbuf;
}

ここで問題が始まりました 1.buf += front_skip;演算子 += を byte[] 型と int 型のオペランドに適用できないと訴えたのに、なぜ C の RTP_Process で機能したのか、およびその C# に相当するものは何か 2. で

if (rtp_padding != -1) //???????
{
    pad_len = buf[pkt_len - 1]; //There is an exeption trown: System.IndexOutOfRangeException: Index was outside the bounds of the array.

私が何かを間違った方法で解釈および翻訳したことは明らかですが、私がやりたいことは、RTPストリームからMPEG-TSフレームを取り出してTCPソケットに転送することだけです。私はそれを聞くのが大好きです

Anwsering に感謝し、よろしく }

4

1 に答える 1