ネットブックには system-lubuntu 18.04.5 64 ビットがあります。「shutdown」以外でネットブックの電源を切ったときに、電源が突然切られたり、ボタンで切られたり、その他の不可抗力が発生したりすると、システムの起動時に「/dev/sda1: UNEXPECTED INCONSISTENCY;」というエラーが発生します。UNEXPECTED INCONSISTENCY 画面
fsck /dev/sda1 と書き込みます。結果は「ファイル システム情報の書き込みエラー: 入力/出力エラー」です。入出力エラー画面
ネットブックは、ネットワークへのアクセスにのみ使用されます。設定と Chrome ブラウザを除いて、ディスクには貴重なデータはありません。質問: システムを再インストールしないように、ディスク上に価値のあるものが何もない場合 (理想的には、設定とクロムを保存する)、エラーを修正する端末用のコマンドがあるかもしれません。または、古い/弱い PC (ネットブック: CPU Intel Atom N450 1.66 GHz、1 GB RAM、250 GB) 用のより安定した OS を推奨できますか?
smartmontools チェック結果:
=== START OF INFORMATION SECTION ===
Model Family: Western Digital Scorpio Blue Serial ATA
Device Model: WDC WD2500BEVT-00A23T0
Serial Number: WD-WX81A7060596
LU WWN Device Id: 5 0014ee 60054049a
Firmware Version: 01.01A01
User Capacity: 250,059,350,016 bytes [250 GB]
Sector Size: 512 bytes logical/physical
Rotation Rate: 5400 rpm
Device is: In smartctl database [for details use: -P show]
ATA Version is: ATA8-ACS (minor revision not indicated)
SATA Version is: SATA 2.6, 3.0 Gb/s
Local Time is: Wed Sep 23 16:51:57 2020 UTC
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
=== START OF ENABLE/DISABLE COMMANDS SECTION ===
SMART Enabled.
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
General SMART Values:
Offline data collection status: (0x00) Offline data collection activity
was never started.
Auto Offline Data Collection: Disabled.
Self-test execution status: ( 0) The previous self-test routine completed
without error or no self-test has ever
been run.
Total time to complete Offline
data collection: ( 6300) seconds.
Offline data collection
capabilities: (0x7b) SMART execute Offline immediate.
Auto Offline data collection on/off support.
Suspend Offline collection upon new
command.
Offline surface scan supported.
Self-test supported.
Conveyance Self-test supported.
Selective Self-test supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
General Purpose Logging supported.
Short self-test routine
recommended polling time: ( 2) minutes.
Extended self-test routine
recommended polling time: ( 76) minutes.
Conveyance self-test routine
recommended polling time: ( 5) minutes.
SCT capabilities: (0x7037) SCT Status supported.
SCT Feature Control supported.
SCT Data Table supported.
SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
1 Raw_Read_Error_Rate 0x002f 200 200 051 Pre-fail Always - 55
3 Spin_Up_Time 0x0027 153 143 021 Pre-fail Always - 1341
4 Start_Stop_Count 0x0032 098 098 000 Old_age Always - 2026
5 Reallocated_Sector_Ct 0x0033 200 200 140 Pre-fail Always - 0
7 Seek_Error_Rate 0x002e 100 253 000 Old_age Always - 0
9 Power_On_Hours 0x0032 094 094 000 Old_age Always - 4706
10 Spin_Retry_Count 0x0032 100 100 000 Old_age Always - 0
11 Calibration_Retry_Count 0x0032 100 100 000 Old_age Always - 0
12 Power_Cycle_Count 0x0032 098 098 000 Old_age Always - 2015
192 Power-Off_Retract_Count 0x0032 200 200 000 Old_age Always - 211
193 Load_Cycle_Count 0x0032 185 185 000 Old_age Always - 47813
194 Temperature_Celsius 0x0022 103 091 000 Old_age Always - 40
196 Reallocated_Event_Count 0x0032 200 200 000 Old_age Always - 0
197 Current_Pending_Sector 0x0032 200 200 000 Old_age Always - 5
198 Offline_Uncorrectable 0x0030 100 253 000 Old_age Offline - 0
199 UDMA_CRC_Error_Count 0x0032 200 200 000 Old_age Always - 0
200 Multi_Zone_Error_Rate 0x0008 100 253 000 Old_age Offline - 0
SMART Error Log Version: 1
No Errors Logged
SMART Self-test log structure revision number 1
No self-tests have been logged. [To run self-tests, use: smartctl -t]
SMART Selective self-test log data structure revision number 1
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
1 0 0 Not_testing
2 0 0 Not_testing
3 0 0 Not_testing
4 0 0 Not_testing
5 0 0 Not_testing
Selective self-test flags (0x0):
After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.