tarbal から freeradius 1.1.7 をインストールしました。実際、コンパイルとインストールのプロセスでエラーは発生しません。まず、デバッグモードで実行しようとすると、すべてがうまく動作しているように見えました
stantiated acct_unique (acct_unique)
Module: Loaded detail
detail: detailfile = "/usr/local/var/log/radius/radacct/%{Client-IP-Address}/detail-%Y%m%d"
detail: detailperm = 384
detail: dirperm = 493
detail: locking = no
Module: Instantiated detail (detail)
Module: Loaded radutmp
radutmp: filename = "/usr/local/var/log/radius/radutmp"
radutmp: username = "%{User-Name}"
radutmp: case_sensitive = yes
radutmp: check_with_nas = yes
radutmp: perm = 384
radutmp: callerid = yes
Module: Instantiated radutmp (radutmp)
Listening on authentication *:1812
Listening on accounting *:1813
Ready to process requests.
次に、次のコマンドでユーザーをテストしようとしましたが、freeradius から拒否パケットを取得しました
radtest user 1111 127.0.0.1 1812 testing123
Sending Access-Request of id 19 to 127.0.0.1 port 1812
User-Name = "user"
User-Password = "1111"
NAS-IP-Address = 255.255.255.255
NAS-Port = 1812
rad_recv: Access-Reject packet from host 127.0.0.1:1812, id=19, length=20
デバッグモードで、次のようなメッセージが表示されました:
rad_recv: Access-Request packet from host 127.0.0.1:50886, id=90, length=56
User-Name = "user"
User-Password = "1111"
NAS-IP-Address = 255.255.255.255
NAS-Port = 1812
Processing the authorize section of radiusd.conf
modcall: entering group authorize for request 0
modcall[authorize]: module "preprocess" returns ok for request 0
modcall[authorize]: module "chap" returns noop for request 0
modcall[authorize]: module "mschap" returns noop for request 0
rlm_realm: No '@' in User-Name = "user", looking up realm NULL
rlm_realm: No such realm "NULL"
modcall[authorize]: module "suffix" returns noop for request 0
rlm_eap: No EAP-Message, not doing EAP
modcall[authorize]: module "eap" returns noop for request 0
users: Matched entry DEFAULT at line 153
modcall[authorize]: module "files" returns ok for request 0
radius_xlat: 'user'
rlm_sql (sql): sql_set_user escaped user --> 'user'
radius_xlat: 'SELECT id, UserName, Attribute, Value, op FROM radcheck WHERE Username = 'user' ORDER BY id'
rlm_sql (sql): Reserving sql socket id: 4
radius_xlat: 'SELECT radgroupcheck.id,radgroupcheck.GroupName,radgroupcheck.Attribute,radgroupcheck.Value,radgroupcheck.op FROM radgroupcheck,usergroup WHERE usergroup.Username = 'user' AND usergroup.GroupName = radgroupcheck.GroupName ORDER BY radgroupcheck.id'
rlm_sql_mysql: MYSQL check_error: 1146 received
rlm_sql_getvpdata: database query error
radius_xlat: 'SELECT id, UserName, Attribute, Value, op FROM radreply WHERE Username = 'user' ORDER BY id'
radius_xlat: 'SELECT radgroupreply.id,radgroupreply.GroupName,radgroupreply.Attribute,radgroupreply.Value,radgroupreply.op FROM radgroupreply,usergroup WHERE usergroup.Username = 'user' AND usergroup.GroupName = radgroupreply.GroupName ORDER BY radgroupreply.id'
rlm_sql_mysql: MYSQL check_error: 1146 received
rlm_sql_getvpdata: database query error
rlm_sql (sql): Released sql socket id: 4
modcall[authorize]: module "sql" returns ok for request 0
rlm_pap: Found existing Auth-Type, not changing it.
modcall[authorize]: module "pap" returns noop for request 0
modcall: leaving group authorize (returns ok) for request 0
rad_check_password: Found Auth-Type System
auth: type "System"
Processing the authenticate section of radiusd.conf
modcall: entering group authenticate for request 0
modcall[authenticate]: module "unix" returns notfound for request 0
modcall: leaving group authenticate (returns notfound) for request 0
auth: Failed to validate the user.
Delaying request 0 for 1 seconds
Finished request 0
Going to the next request
--- Walking the entire request list ---
Waking up in 1 seconds...
--- Walking the entire request list ---
Waking up in 1 seconds...
--- Walking the entire request list ---
Sending Access-Reject of id 90 to 127.0.0.1 port 50886
Waking up in 4 seconds...
--- Walking the entire request list ---
Cleaning up request 0 ID 90 with timestamp 5130196a
Nothing to do. Sleeping until we see a request.
この問題を解決するにはどうすればよいですか?
ありがとう