13

Ruby で UNIX ソケットに接続、読み取り、書き込みしようとしています。これは、haproxy によって使用される統計ソケットです。

私のコードは次のとおりです。

require 'socket'
socket = UNIXSocket.new("/tmp/haproxy.stats.socket")

# First attempt: works

socket.puts("show stat")

while(line = socket.gets) do
  puts line
end

# Second attemp: fails

socket.puts("show stat")

while(line = socket.gets) do
  puts line
end

1回目は成功しますが、2回目で失敗します。理由はわかりません。

# pxname,svname,qcur,qmax,scur,smax,slim,stot,bin,bout,dreq,dresp,ereq,econ,eresp,wretr,wredis,status,weight,act,bck,chkfail,chkdown,lastchg,downtime,qlimit,pid,iid,sid,throttle,lbtot,tracked,type,rate,rate_lim,rate_max,check_status,check_code,check_duration,hrsp_1xx,hrsp_2xx,hrsp_3xx,hrsp_4xx,hrsp_5xx,hrsp_other,hanafail,req_rate,req_rate_max,req_tot,cli_abrt,srv_abrt,
stats,FRONTEND,,,0,0,2000,0,0,0,0,0,0,,,,,OPEN,,,,,,,,,1,1,0,,,,0,0,0,0,,,,0,0,0,0,0,0,,0,0,0,,,
stats,BACKEND,0,0,0,0,2000,0,0,0,0,0,,0,0,0,0,UP,0,0,0,,0,22,0,,1,1,0,,0,,1,0,,0,,,,0,0,0,0,0,0,,,,,0,0,
legacy_socket,FRONTEND,,,0,0,1000,0,0,0,0,0,0,,,,,OPEN,,,,,,,,,1,2,0,,,,0,0,0,0,,,,0,0,0,0,0,0,,0,0,0,,,
all,FRONTEND,,,0,0,10000,0,0,0,0,0,0,,,,,OPEN,,,,,,,,,1,3,0,,,,0,0,0,0,,,,0,0,0,0,0,0,,0,0,0,,,
socket_backend,socket,0,0,0,0,200,0,0,0,,0,,0,0,0,0,DOWN,1,1,0,0,1,22,22,,1,4,1,,0,,2,0,,0,L4CON,,0,0,0,0,0,0,0,0,,,,0,0,
socket_backend,socket,0,0,0,0,200,0,0,0,,0,,0,0,0,0,DOWN,1,1,0,0,1,22,22,,1,4,2,,0,,2,0,,0,L4CON,,0,0,0,0,0,0,0,0,,,,0,0,
socket_backend,socket,0,0,0,0,200,0,0,0,,0,,0,0,0,0,DOWN,1,1,0,0,1,22,22,,1,4,3,,0,,2,0,,0,L4CON,,0,0,0,0,0,0,0,0,,,,0,0,
socket_backend,socket,0,0,0,0,200,0,0,0,,0,,0,0,0,0,DOWN,1,1,0,0,1,22,22,,1,4,4,,0,,2,0,,0,L4CON,,0,0,0,0,0,0,0,0,,,,0,0,
socket_backend,socket,0,0,0,0,200,0,0,0,,0,,0,0,0,0,DOWN,1,1,0,0,1,22,22,,1,4,5,,0,,2,0,,0,L4CON,,0,0,0,0,0,0,0,0,,,,0,0,
socket_backend,socket,0,0,0,0,200,0,0,0,,0,,0,0,0,0,DOWN,1,1,0,0,1,22,22,,1,4,6,,0,,2,0,,0,L4CON,,0,0,0,0,0,0,0,0,,,,0,0,
socket_backend,socket,0,0,0,0,200,0,0,0,,0,,0,0,0,0,DOWN,1,1,0,0,1,22,22,,1,4,7,,0,,2,0,,0,L4CON,,0,0,0,0,0,0,0,0,,,,0,0,
socket_backend,socket,0,0,0,0,200,0,0,0,,0,,0,0,0,0,DOWN,1,1,0,0,1,21,21,,1,4,8,,0,,2,0,,0,L4CON,,0,0,0,0,0,0,0,0,,,,0,0,
socket_backend,socket,0,0,0,0,200,0,0,0,,0,,0,0,0,0,DOWN,1,1,0,0,1,21,21,,1,4,9,,0,,2,0,,0,L4CON,,0,0,0,0,0,0,0,0,,,,0,0,
socket_backend,socket,0,0,0,0,200,0,0,0,,0,,0,0,0,0,DOWN,1,1,0,0,1,21,21,,1,4,10,,0,,2,0,,0,L4CON,,0,0,0,0,0,0,0,0,,,,0,0,
socket_backend,BACKEND,0,0,0,0,0,0,0,0,0,0,,0,0,0,0,DOWN,0,0,0,,1,21,21,,1,4,0,,0,,1,0,,0,,,,0,0,0,0,0,0,,,,,0,0,
api_backend,api,0,0,0,0,200,0,0,0,,0,,0,0,0,0,UP,1,1,0,0,0,22,0,,1,5,1,,0,,2,0,,0,L4OK,,0,0,0,0,0,0,0,0,,,,0,0,
api_backend,api,0,0,0,0,1,0,0,0,,0,,0,0,0,0,UP,1,1,0,0,0,22,0,,1,5,2,,0,,2,0,,0,L4OK,,0,0,0,0,0,0,0,0,,,,0,0,
api_backend,api,0,0,0,0,1,0,0,0,,0,,0,0,0,0,DOWN,1,1,0,0,1,21,21,,1,5,3,,0,,2,0,,0,L4CON,,0,0,0,0,0,0,0,0,,,,0,0,
api_backend,BACKEND,0,0,0,0,0,0,0,0,0,0,,0,0,0,0,UP,2,2,0,,0,22,0,,1,5,0,,0,,1,0,,0,,,,0,0,0,0,0,0,,,,,0,0,
www_backend,ruby-www,0,0,0,0,10000,0,0,0,,0,,0,0,0,0,UP,1,1,0,0,0,22,0,,1,6,1,,0,,2,0,,0,L4OK,,0,0,0,0,0,0,0,0,,,,0,0,
www_backend,BACKEND,0,0,0,0,0,0,0,0,0,0,,0,0,0,0,UP,1,1,0,,0,22,0,,1,6,0,,0,,1,0,,0,,,,0,0,0,0,0,0,,,,,0,0,

/Users/Olly/Desktop/haproxy_stats.rb:14:in `write': Broken pipe (Errno::EPIPE)
    from /Users/Olly/Desktop/haproxy_stats.rb:14:in `puts'
    from /Users/Olly/Desktop/haproxy_stats.rb:14

何が問題ですか？UNIX ソケットと Ruby の使用に関する適切なリファレンスはありますか?

4

4 に答える 4

14

オリー、

「prompt」コマンドを使用しない限り、HAproxy は最初の要求の後に接続を閉じます ( http://haproxy.1wt.eu/download/1.4/doc/configuration.txtセクション 9.2 を参照)。

#!/usr/bin/env ruby                                                                                                                         

require 'socket'                                                                                                                            

socket = UNIXSocket.new("/tmp/haproxy.stats.socket")                                                                                            

# Goes interactive mode
socket.puts("prompt")                                                                                                                       

# Ask statistics every second                                                                                                                             
while true                                                                                                                                  
  socket.puts("show stat")                                                                                                                  
  socket.each_char do |c|
    # We had the prompt, break out                                                                                                   
    break if c == '>'                                                                                                                       
    print c                                                                                                                                 
  end                                                                                                                                       

  sleep 1                                                                                                                                   
end
于 2012-06-19T07:02:34.877 に答える
6

最初のリクエスト後に接続が閉じられたようです。私はあなたが何か悪いことをしているとは思わない。HAProxy statsソケットは、おそらく1つのコマンドに応答してから、接続を閉じるように設計されています。

リクエストごとに再接続する必要があると思います。

socatでHAProxystatsソケットを使用することについてのこのブログ投稿を見ると、コマンドをsocatにパイプし、socatがソケットを閉じるまでソケットから読み取るため、これは理にかなっています。show stat

于 2010-06-02T18:24:17.560 に答える
0

マンソケットが使えます。ソケットクラスは、C関数の場合と同じように使用できます。

マニュアルページは非常に便利だと思いました。

于 2010-11-01T10:11:09.030 に答える