私は、 Windows でFTDI D2XX C# .NET ラッパーを使用する既存の機能的な C# アプリケーションを、Linux と Mono に移植する作業を行っています。Linux D2XX ドライバーのインストールに関する指示に従いました。Linux で実行していることが検出されると、Windows ドライバーではなく、C# .NET ラッパーで Linux ドライバーを探して読み込みます。
この作業を行った後でも、アプリケーション コードの大部分は問題ありませんが、SetEventNotification 関数で設定されたイベントが FT_EVENT_RXCHAR イベントでトリガーされると、アプリケーションがクラッシュするようです。
C# アプリケーションのフローは次のとおりです。
- FTDI デバイスとの通信を設定する
- FTDI デバイスから新しいデータが利用可能になったときに通知される SetEventNotification
- FTDI デバイスに ping を送信し、準備ができていることと、データが必要であることを知らせます。
- (SetEventNotification を使用して) 新しいデータが通知されたら、それを使用していくつかの処理を行います。
もう少し詳しく：
- C#ラッパーを使用した読み取りと書き込みは、Linux / Monoで正常に機能するようです
- デバイスは最初に書き込みを使用して ping され、次に次の読み取りが成功します。
- D2XX Programmer's Guide で提供されているサンプル コードを使用すると、Linux で記述された C コードは、SetEventNotification を使用してもクラッシュしません。
- 必要なバイト数で C# ラッパーの Read を使用する (明らかな) 代替手段は、Linux / Mono で適切に機能しているようです。
いくつかの質問:
- Linux/Mono で D2XX ドライバー用の C# .NET ラッパーを使用していて、この問題が発生した人はいますか?
- C# ラッパーの SetEventNotification は EventWaitHandle を想定しており、SafeWaitHandle を使用してネイティブ オペレーティング システム ハンドルを取得します。問題がここにある可能性はありますか？
提供された洞察は大歓迎です。
編集：
スタック トレースを以下に添付します。
ポーリング アプローチに移行しようとしましたが、FTDI 読み取りを実行すると、データの「フレーム」が完全に書き込まれず、データにギャップが生じる可能性があるようです。
この問題に関するガイダンスについて、FTDI に問い合わせました。実用的な何かが返ってきたら更新します。
# mono --debug ./CT4USB.exe
Native stacktrace:
mono() [0x49d5fc]
mono() [0x424a0e]
/lib/x86_64-linux-gnu/libpthread.so.0(+0x10330) [0x7f3253539330]
/lib/x86_64-linux-gnu/libpthread.so.0(pthread_mutex_lock+0x4) [0x7f3253533404]
/usr/local/lib/libftd2xx.so(+0x12f52) [0x7f324b9d1f52]
/usr/local/lib/libftd2xx.so(+0x134f1) [0x7f324b9d24f1]
/usr/local/lib/libftd2xx.so(processor_thread+0x21b) [0x7f324b9d29bd]
/lib/x86_64-linux-gnu/libpthread.so.0(+0x8184) [0x7f3253531184]
/lib/x86_64-linux-gnu/libc.so.6(clone+0x6d) [0x7f325325e37d]
Debug info from gdb:
[New LWP 5654]
[New LWP 5653]
[New LWP 5652]
[New LWP 5645]
[New LWP 5644]
[New LWP 5643]
[New LWP 5642]
[New LWP 5641]
[New LWP 5640]
[New LWP 5639]
[Thread debugging using libthread_db enabled]
Using host libthread_db library "/lib/x86_64-linux-gnu/libthread_db.so.1".
0x00007f3253538b9d in nanosleep () at ../sysdeps/unix/syscall-template.S:81
81 ../sysdeps/unix/syscall-template.S: No such file or directory.
Id Target Id Frame
11 Thread 0x7f32523ff700 (LWP 5639) "mono" pthread_cond_wait@@GLIBC_2.3.2 () at ../nptl/sysdeps/unix/sysv/linux/x86_64/pthread_cond_wait.S:185
10 Thread 0x7f3252a81700 (LWP 5640) "Finalizer" sem_wait () at ../nptl/sysdeps/unix/sysv/linux/x86_64/sem_wait.S:85
9 Thread 0x7f3253efa700 (LWP 5641) "mono" __clock_nanosleep (clock_id=1, flags=1, req=0x7f3253ef9d80, rem=0x7f325326c974 <__clock_nanosleep+132>) at ../sysdeps/unix/sysv/linux/clock_nanosleep.c:49
8 Thread 0x7f324bfff700 (LWP 5642) "Threadpool work" pthread_cond_timedwait@@GLIBC_2.3.2 () at ../nptl/sysdeps/unix/sysv/linux/x86_64/pthread_cond_timedwait.S:238
7 Thread 0x7f324bdfe700 (LWP 5643) "Threadpool work" pthread_cond_timedwait@@GLIBC_2.3.2 () at ../nptl/sysdeps/unix/sysv/linux/x86_64/pthread_cond_timedwait.S:238
6 Thread 0x7f324b9be700 (LWP 5644) "Threadpool work" 0x00007f3253250fdd in poll () at ../sysdeps/unix/syscall-template.S:81
5 Thread 0x7f324b1bd700 (LWP 5645) "Threadpool work" 0x00007f3253250fdd in poll () at ../sysdeps/unix/syscall-template.S:81
4 Thread 0x7f324a7ff700 (LWP 5652) "Threadpool work" pthread_cond_timedwait@@GLIBC_2.3.2 () at ../nptl/sysdeps/unix/sysv/linux/x86_64/pthread_cond_timedwait.S:238
3 Thread 0x7f3249ffe700 (LWP 5653) "Threadpool work" 0x00007f3253538ed9 in __libc_waitpid (pid=5655, stat_loc=0x7f3249ffce4c, options=0) at ../sysdeps/unix/sysv/linux/waitpid.c:40
2 Thread 0x7f32497fd700 (LWP 5654) "Threadpool work" pthread_cond_wait@@GLIBC_2.3.2 () at ../nptl/sysdeps/unix/sysv/linux/x86_64/pthread_cond_wait.S:185
* 1 Thread 0x7f325405d7c0 (LWP 5638) "mono" 0x00007f3253538b9d in nanosleep () at ../sysdeps/unix/syscall-template.S:81
Thread 11 (Thread 0x7f32523ff700 (LWP 5639)):
#0 pthread_cond_wait@@GLIBC_2.3.2 () at ../nptl/sysdeps/unix/sysv/linux/x86_64/pthread_cond_wait.S:185
#1 0x00000000005f9aec in ?? ()
#2 0x00007f3253531184 in start_thread (arg=0x7f32523ff700) at pthread_create.c:312
#3 0x00007f325325e37d in clone () at ../sysdeps/unix/sysv/linux/x86_64/clone.S:111
Thread 10 (Thread 0x7f3252a81700 (LWP 5640)):
#0 sem_wait () at ../nptl/sysdeps/unix/sysv/linux/x86_64/sem_wait.S:85
#1 0x000000000061de28 in mono_sem_wait ()
#2 0x00000000005a2076 in ?? ()
#3 0x00000000005843d3 in ?? ()
#4 0x0000000000624666 in ?? ()
#5 0x00007f3253531184 in start_thread (arg=0x7f3252a81700) at pthread_create.c:312
#6 0x00007f325325e37d in clone () at ../sysdeps/unix/sysv/linux/x86_64/clone.S:111
Thread 9 (Thread 0x7f3253efa700 (LWP 5641)):
#0 __clock_nanosleep (clock_id=1, flags=1, req=0x7f3253ef9d80, rem=0x7f325326c974 <__clock_nanosleep+132>) at ../sysdeps/unix/sysv/linux/clock_nanosleep.c:49
#1 0x00000000006122c8 in ?? ()
#2 0x0000000000588244 in ?? ()
#3 0x00000000005843d3 in ?? ()
#4 0x0000000000624666 in ?? ()
#5 0x00007f3253531184 in start_thread (arg=0x7f3253efa700) at pthread_create.c:312
#6 0x00007f325325e37d in clone () at ../sysdeps/unix/sysv/linux/x86_64/clone.S:111
Thread 8 (Thread 0x7f324bfff700 (LWP 5642)):
#0 pthread_cond_timedwait@@GLIBC_2.3.2 () at ../nptl/sysdeps/unix/sysv/linux/x86_64/pthread_cond_timedwait.S:238
#1 0x00000000005fef90 in ?? ()
#2 0x00000000006117a2 in ?? ()
#3 0x00000000005840fd in ?? ()
#4 0x00000000005853e6 in ?? ()
#5 0x00000000418b9b0e in ?? ()
#6 0x0000000000000000 in ?? ()
Thread 7 (Thread 0x7f324bdfe700 (LWP 5643)):
#0 pthread_cond_timedwait@@GLIBC_2.3.2 () at ../nptl/sysdeps/unix/sysv/linux/x86_64/pthread_cond_timedwait.S:238
#1 0x000000000061b982 in ?? ()
#2 0x0000000000586b58 in ?? ()
#3 0x00000000005843d3 in ?? ()
#4 0x0000000000624666 in ?? ()
#5 0x00007f3253531184 in start_thread (arg=0x7f324bdfe700) at pthread_create.c:312
#6 0x00007f325325e37d in clone () at ../sysdeps/unix/sysv/linux/x86_64/clone.S:111
Thread 6 (Thread 0x7f324b9be700 (LWP 5644)):
#0 0x00007f3253250fdd in poll () at ../sysdeps/unix/syscall-template.S:81
#1 0x00007f324b9f2a52 in linux_netlink_event_thread_main () from /usr/local/lib/libftd2xx.so
#2 0x00007f3253531184 in start_thread (arg=0x7f324b9be700) at pthread_create.c:312
#3 0x00007f325325e37d in clone () at ../sysdeps/unix/sysv/linux/x86_64/clone.S:111
Thread 5 (Thread 0x7f324b1bd700 (LWP 5645)):
#0 0x00007f3253250fdd in poll () at ../sysdeps/unix/syscall-template.S:81
#1 0x00007f324b9eb14e in handle_events () from /usr/local/lib/libftd2xx.so
#2 0x00007f324b9eb569 in libusb_handle_events_timeout_completed () from /usr/local/lib/libftd2xx.so
#3 0x00007f324b9eb674 in libusb_handle_events_timeout () from /usr/local/lib/libftd2xx.so
#4 0x00007f324b9c924f in poll_async_libusb () from /usr/local/lib/libftd2xx.so
#5 0x00007f3253531184 in start_thread (arg=0x7f324b1bd700) at pthread_create.c:312
#6 0x00007f325325e37d in clone () at ../sysdeps/unix/sysv/linux/x86_64/clone.S:111
Thread 4 (Thread 0x7f324a7ff700 (LWP 5652)):
#0 pthread_cond_timedwait@@GLIBC_2.3.2 () at ../nptl/sysdeps/unix/sysv/linux/x86_64/pthread_cond_timedwait.S:238
#1 0x00007f324b9cf9fe in EventWait () from /usr/local/lib/libftd2xx.so
#2 0x00007f324b9d2651 in reader_thread () from /usr/local/lib/libftd2xx.so
#3 0x00007f3253531184 in start_thread (arg=0x7f324a7ff700) at pthread_create.c:312
#4 0x00007f325325e37d in clone () at ../sysdeps/unix/sysv/linux/x86_64/clone.S:111
Thread 3 (Thread 0x7f3249ffe700 (LWP 5653)):
#0 0x00007f3253538ed9 in __libc_waitpid (pid=5655, stat_loc=0x7f3249ffce4c, options=0) at ../sysdeps/unix/sysv/linux/waitpid.c:40
#1 0x000000000049d689 in ?? ()
#2 0x0000000000424a0e in ?? ()
#3 <signal handler called>
#4 __GI___pthread_mutex_lock (mutex=0x0) at ../nptl/pthread_mutex_lock.c:66
#5 0x00007f324b9d1f52 in signalSomeEvents () from /usr/local/lib/libftd2xx.so
#6 0x00007f324b9d24f1 in ProcessBulkInData () from /usr/local/lib/libftd2xx.so
#7 0x00007f324b9d29bd in processor_thread () from /usr/local/lib/libftd2xx.so
#8 0x00007f3253531184 in start_thread (arg=0x7f3249ffe700) at pthread_create.c:312
#9 0x00007f325325e37d in clone () at ../sysdeps/unix/sysv/linux/x86_64/clone.S:111
Thread 2 (Thread 0x7f32497fd700 (LWP 5654)):
#0 pthread_cond_wait@@GLIBC_2.3.2 () at ../nptl/sysdeps/unix/sysv/linux/x86_64/pthread_cond_wait.S:185
#1 0x00007f324b9cf904 in EventWait () from /usr/local/lib/libftd2xx.so
#2 0x00007f324b9cbfd1 in write_thread () from /usr/local/lib/libftd2xx.so
#3 0x00007f3253531184 in start_thread (arg=0x7f32497fd700) at pthread_create.c:312
#4 0x00007f325325e37d in clone () at ../sysdeps/unix/sysv/linux/x86_64/clone.S:111
Thread 1 (Thread 0x7f325405d7c0 (LWP 5638)):
#0 0x00007f3253538b9d in nanosleep () at ../sysdeps/unix/syscall-template.S:81
#1 0x00000000005fedfa in ?? ()
#2 0x000000000061101b in ?? ()
#3 0x000000000058415e in ?? ()
#4 0x0000000000585309 in ?? ()
#5 0x00000000418b3e8d in ?? ()
#6 0x00000000015de450 in ?? ()
#7 0x00007ffc9ba9b960 in ?? ()
#8 0x00007f3253fb8130 in ?? ()
#9 0x00007f3252400578 in ?? ()
#10 0x00007f3252400528 in ?? ()
#11 0x00000000015a41e0 in ?? ()
#12 0x00000000418b3e07 in ?? ()
#13 0x00007ffc9ba9b4d0 in ?? ()
#14 0x00007ffc9ba9b450 in ?? ()
/build/buildd/gdb-7.7.1/gdb/dwarf2-frame.c:692: internal-error: Unknown CFI encountered.
A problem internal to GDB has been detected,
further debugging may prove unreliable.
Quit this debugging session? (y or n) [answered Y; input not from terminal]
/build/buildd/gdb-7.7.1/gdb/dwarf2-frame.c:692: internal-error: Unknown CFI encountered.
A problem internal to GDB has been detected,
further debugging may prove unreliable.
Create a core file of GDB? (y or n) [answered Y; input not from terminal]
=================================================================
Got a SIGSEGV while executing native code. This usually indicates
a fatal error in the mono runtime or one of the native libraries
used by your application.
=================================================================
Aborted (core dumped)
2番目を編集します：
Mono の SafeWaitHandle と SetEventNotification に期待されるパラメーターの表現は完全に異なります。FTDI D2XX ライブラリは SafeWaitHandle を EVENT_HANDLE (ftd2xx.h ヘッダーで定義。基本的には pthread_cond_t および pthread_mutex_t) として処理しようとしているため、クラッシュが発生するのはそのためだと思います。
FTDI D2XX C# .NET ラッパーの libpthread で P/Invoke を使用して、pthread 条件とミューテックスと Mono SafeWaitHandle の間で必要な変換を実行できると思います。この時点で、FTDI D2XX の pthread_cond_wait でループしてブロックする作業 C コードが必要です。そのコードはまだ機能していません。誰かがアドバイスを持っている場合は、以下にリストされています。
/*/*
gcc -o SetEventNotification_separate_thread SetEventNotification_separate_thread.c -lpthread -lftd2xx -Wl,-rpath /usr/local/lib
*/
#include <stdlib.h>
#include <pthread.h>
#include <stdio.h>
#include <stdint.h>
#include "../ftd2xx.h"
static FT_HANDLE ft_handle;
// Seems like this sort of stuff should have been provided by FTDI
static const char *ft_errors[] =
{
[FT_OK] = "Success",
[FT_INVALID_HANDLE] = "Invalid device handle",
[FT_DEVICE_NOT_FOUND] = "Device not found",
[FT_DEVICE_NOT_OPENED] = "Device not opened",
[FT_IO_ERROR] = "Input/output error",
[FT_INSUFFICIENT_RESOURCES] = "Insufficient resources",
[FT_INVALID_PARAMETER] = "Invalid parameter",
[FT_INVALID_BAUD_RATE] = "Invalid baud rate",
[FT_DEVICE_NOT_OPENED_FOR_ERASE] = "Device not opened for erase",
[FT_DEVICE_NOT_OPENED_FOR_WRITE] = "Device not opened for write",
[FT_FAILED_TO_WRITE_DEVICE] = "Failed to write device",
[FT_EEPROM_READ_FAILED] = "EEPROM read failed",
[FT_EEPROM_WRITE_FAILED] = "EEPROM write failed",
[FT_EEPROM_ERASE_FAILED] = "EEPROM erase failed",
[FT_EEPROM_NOT_PRESENT] = "EEPROM not present",
[FT_EEPROM_NOT_PROGRAMMED] = "EEPROM not programmed",
[FT_INVALID_ARGS] = "Invalid argument",
[FT_NOT_SUPPORTED] = "Not supported",
[FT_OTHER_ERROR] = "Other error"
};
static const int num_ft_errors = sizeof(ft_errors) / sizeof(ft_errors[FT_OK]);
static const char *ft_strerror(FT_STATUS ft_status)
{
if (ft_status < 0 // Should be impossible because it is unsigned
|| ft_status >= num_ft_errors
|| !ft_errors[ft_status])
{
return "Unknown error";
}
return ft_errors[ft_status];
}
static void ft_error_exit(const char *str, FT_STATUS ft_status)
{
if (str && *str)
fprintf(stderr, "%s: %sn", str, ft_strerror(ft_status));
else
fprintf(stderr, "%sn", ft_strerror(ft_status));
exit(1);
}
static void pthread_error_exit(const char *str, int err)
{
if (str && *str)
fprintf(stderr, "%s: %sn", str, strerror(err));
else
fprintf(stderr, "%sn", strerror(err));
exit(1);
}
static void std_error_exit(const char *str)
{
perror(str);
exit(1);
}
// Reader thread function
static void *reader_func(void *arg)
{
FT_STATUS ft_status;
EVENT_HANDLE eh;
DWORD chars_in_q;
char buf[8192];
int pterr;
if ((pterr = pthread_mutex_init(&eh.eMutex, NULL)))
pthread_error_exit("pthread_mutex_init", pterr);
if ((pterr = pthread_cond_init(&eh.eCondVar, NULL)))
pthread_error_exit("pthread_cond_init", pterr);
if ((ft_status = FT_SetEventNotification(ft_handle, FT_EVENT_RXCHAR,
(PVOID)&eh)) != FT_OK)
ft_error_exit("FT_SetEventNotification", ft_status);
for (;;)
{
printf("at for: chars_in_q: %d\n", chars_in_q);
if ((pterr = pthread_mutex_lock(&eh.eMutex))){
pthread_error_exit("pthread_mutex_lock", pterr);
printf("pthread_mutex_lock failed...\n");
}
printf("pthread_mutex_lock\n");
if ((ft_status = FT_GetQueueStatus(ft_handle, &chars_in_q)) != FT_OK)
ft_error_exit("FT_GetQueueStatus", ft_status);
printf("before if (chars_in_q == 0): chars_in_q: %d\n", chars_in_q);
// while (chars_in_q == 0)
// {
printf("<<----------- SetEventNotification pthread_cond_wait --------------->>\n");
if ((pterr = pthread_cond_wait(&eh.eCondVar, &eh.eMutex)))
pthread_error_exit("pthread_cond_wait", pterr);
printf("pthread_cond_wait\n");
if ((ft_status = FT_GetQueueStatus(ft_handle,
&chars_in_q)) != FT_OK)
ft_error_exit("FT_GetQueueStatus", ft_status);
printf("before if (chars_in_q == 0): chars_in_q: %d\n", chars_in_q);
// }
if ((pterr = pthread_mutex_unlock(&eh.eMutex)))
pthread_error_exit("pthread_mutex_unlock", pterr);
printf("pthread_mutex_unlock\n");
while (chars_in_q)
{
printf("at while (chars_in_q): chars_in_q: %d\n", chars_in_q);
DWORD len_to_read, len_read;
ssize_t len_written;
len_to_read = (chars_in_q > sizeof(buf)) ? sizeof(buf) : chars_in_q;
if ((ft_status = FT_Read(ft_handle, (LPVOID)buf,
len_to_read, &len_read)) != FT_OK)
ft_error_exit("FT_Read", ft_status);
if (!len_read)
{
fprintf(stderr, "FT_Read returned no data.n");
exit(1);
}
len_written = printf("%s\n", buf);
printf("len_to_read: %d\n", len_to_read);
printf("len_read: %d\n", len_read);
chars_in_q -= len_read;
}
}
}
int main(int argc, char *argv[])
{
FT_STATUS ft_status;
DWORD devCount;
DWORD devIndex = 0; // first device
DWORD numDevices = 1;
char serialNumber[64]; // more than enough room!
const unsigned int baudrate = 8000000;
FT_DEVICE_LIST_INFO_NODE * devInfo;
devInfo = malloc(sizeof(FT_DEVICE_LIST_INFO_NODE)*numDevices);
ft_status = FT_CreateDeviceInfoList(&devCount);
if( ft_status != FT_OK)
{
printf("No devices connected!\n");
exit(-1);
}
printf("Devices found: %d\n", devCount);
ft_status = FT_ListDevices((PVOID)devIndex, serialNumber, FT_LIST_BY_INDEX|FT_OPEN_BY_SERIAL_NUMBER);
if ( ft_status == FT_OK)
{
// FT_ListDevices OK, serial number is in serialNumber
printf("Device Serial Number: %s\n", serialNumber);
}
else
{
// FT_ListDevices failed
}
ft_status = FT_OpenEx(serialNumber, FT_OPEN_BY_SERIAL_NUMBER, &ft_handle);
printf("after calling FT_OpenEx\n");
if ( ft_status == FT_OK)
{
// FT_OpenEx OK, ft_handle not null
printf("FT_OpenEx succeeded\n");
}
else
{
printf("FT_OpenEx failed\n");
}
ft_status = FT_SetBaudRate(ft_handle, baudrate);
if ( ft_status == FT_OK)
{
// FT_SetBaudRate OK
printf("FT_SetBaudRate succeeded\n");
}
else
{
printf("FT_SetBaudRate failed\n");
}
ft_status = FT_SetFlowControl(ft_handle, FT_FLOW_RTS_CTS, 0, 0);
if ( ft_status == FT_OK)
{
// FT_SetFlowControl OK
printf("FT_SetFlowControl succeeded\n");
}
else
{
printf("FT_SetFlowControl failed\n");
}
// Flush the FTDI's buffers
if ((ft_status = FT_Purge(ft_handle, FT_PURGE_RX | FT_PURGE_TX)) != FT_OK)
ft_error_exit("FT_Purge", ft_status);
// Create reader and writer threads.
int pterr;
sigset_t sig_set;
(void)sigfillset(&sig_set);
pthread_attr_t ptattr;
if ((pterr = pthread_attr_init(&ptattr)))
pthread_error_exit("pthread_attr_init", pterr);
if ((pterr = pthread_attr_setdetachstate(&ptattr,
PTHREAD_CREATE_DETACHED)))
pthread_error_exit("pthread_attr_setdetachstate", pterr);
pthread_t reader_id, writer_id;
if ((pterr = pthread_create(&reader_id, &ptattr, reader_func, NULL)))
pthread_error_exit("pthread_create reader", pterr);
// Now wait for a signal to terminate us
int caught_sig;
if (sigwait(&sig_set, &caught_sig))
std_error_exit("sigwait");
exit(0);
}
gcc -o SetEventNotification_separate_thread SetEventNotification_separate_thread.c -lpthread -lftd2xx -Wl,-rpath /usr/local/lib
*/
#include <stdlib.h>
#include <pthread.h>
#include <stdio.h>
#include <stdint.h>
#include "../ftd2xx.h"
static FT_HANDLE ft_handle;
// Seems like this sort of stuff should have been provided by FTDI
static const char *ft_errors[] =
{
[FT_OK] = "Success",
[FT_INVALID_HANDLE] = "Invalid device handle",
[FT_DEVICE_NOT_FOUND] = "Device not found",
[FT_DEVICE_NOT_OPENED] = "Device not opened",
[FT_IO_ERROR] = "Input/output error",
[FT_INSUFFICIENT_RESOURCES] = "Insufficient resources",
[FT_INVALID_PARAMETER] = "Invalid parameter",
[FT_INVALID_BAUD_RATE] = "Invalid baud rate",
[FT_DEVICE_NOT_OPENED_FOR_ERASE] = "Device not opened for erase",
[FT_DEVICE_NOT_OPENED_FOR_WRITE] = "Device not opened for write",
[FT_FAILED_TO_WRITE_DEVICE] = "Failed to write device",
[FT_EEPROM_READ_FAILED] = "EEPROM read failed",
[FT_EEPROM_WRITE_FAILED] = "EEPROM write failed",
[FT_EEPROM_ERASE_FAILED] = "EEPROM erase failed",
[FT_EEPROM_NOT_PRESENT] = "EEPROM not present",
[FT_EEPROM_NOT_PROGRAMMED] = "EEPROM not programmed",
[FT_INVALID_ARGS] = "Invalid argument",
[FT_NOT_SUPPORTED] = "Not supported",
[FT_OTHER_ERROR] = "Other error"
};
static const int num_ft_errors = sizeof(ft_errors) / sizeof(ft_errors[FT_OK]);
static const char *ft_strerror(FT_STATUS ft_status)
{
if (ft_status < 0 // Should be impossible because it is unsigned
|| ft_status >= num_ft_errors
|| !ft_errors[ft_status])
{
return "Unknown error";
}
return ft_errors[ft_status];
}
static void ft_error_exit(const char *str, FT_STATUS ft_status)
{
if (str && *str)
fprintf(stderr, "%s: %sn", str, ft_strerror(ft_status));
else
fprintf(stderr, "%sn", ft_strerror(ft_status));
exit(1);
}
static void pthread_error_exit(const char *str, int err)
{
if (str && *str)
fprintf(stderr, "%s: %sn", str, strerror(err));
else
fprintf(stderr, "%sn", strerror(err));
exit(1);
}
static void std_error_exit(const char *str)
{
perror(str);
exit(1);
}
// Reader thread function
static void *reader_func(void *arg)
{
FT_STATUS ft_status;
EVENT_HANDLE eh;
DWORD chars_in_q;
char buf[8192];
int pterr;
if ((pterr = pthread_mutex_init(&eh.eMutex, NULL)))
pthread_error_exit("pthread_mutex_init", pterr);
if ((pterr = pthread_cond_init(&eh.eCondVar, NULL)))
pthread_error_exit("pthread_cond_init", pterr);
if ((ft_status = FT_SetEventNotification(ft_handle, FT_EVENT_RXCHAR,
(PVOID)&eh)) != FT_OK)
ft_error_exit("FT_SetEventNotification", ft_status);
for (;;)
{
printf("at for: chars_in_q: %d\n", chars_in_q);
if ((pterr = pthread_mutex_lock(&eh.eMutex))){
pthread_error_exit("pthread_mutex_lock", pterr);
printf("pthread_mutex_lock failed...\n");
}
printf("pthread_mutex_lock\n");
if ((ft_status = FT_GetQueueStatus(ft_handle, &chars_in_q)) != FT_OK)
ft_error_exit("FT_GetQueueStatus", ft_status);
printf("before if (chars_in_q == 0): chars_in_q: %d\n", chars_in_q);
// while (chars_in_q == 0)
// {
printf("<<----------- SetEventNotification pthread_cond_wait --------------->>\n");
if ((pterr = pthread_cond_wait(&eh.eCondVar, &eh.eMutex)))
pthread_error_exit("pthread_cond_wait", pterr);
printf("pthread_cond_wait\n");
if ((ft_status = FT_GetQueueStatus(ft_handle,
&chars_in_q)) != FT_OK)
ft_error_exit("FT_GetQueueStatus", ft_status);
printf("before if (chars_in_q == 0): chars_in_q: %d\n", chars_in_q);
// }
if ((pterr = pthread_mutex_unlock(&eh.eMutex)))
pthread_error_exit("pthread_mutex_unlock", pterr);
printf("pthread_mutex_unlock\n");
while (chars_in_q)
{
printf("at while (chars_in_q): chars_in_q: %d\n", chars_in_q);
DWORD len_to_read, len_read;
ssize_t len_written;
len_to_read = (chars_in_q > sizeof(buf)) ? sizeof(buf) : chars_in_q;
if ((ft_status = FT_Read(ft_handle, (LPVOID)buf,
len_to_read, &len_read)) != FT_OK)
ft_error_exit("FT_Read", ft_status);
if (!len_read)
{
fprintf(stderr, "FT_Read returned no data.n");
exit(1);
}
len_written = printf("%s\n", buf);
printf("len_to_read: %d\n", len_to_read);
printf("len_read: %d\n", len_read);
chars_in_q -= len_read;
}
}
}
int main(int argc, char *argv[])
{
FT_STATUS ft_status;
DWORD devCount;
DWORD devIndex = 0; // first device
DWORD numDevices = 1;
char serialNumber[64]; // more than enough room!
const unsigned int baudrate = 8000000;
FT_DEVICE_LIST_INFO_NODE * devInfo;
devInfo = malloc(sizeof(FT_DEVICE_LIST_INFO_NODE)*numDevices);
ft_status = FT_CreateDeviceInfoList(&devCount);
if( ft_status != FT_OK)
{
printf("No devices connected!\n");
exit(-1);
}
printf("Devices found: %d\n", devCount);
ft_status = FT_ListDevices((PVOID)devIndex, serialNumber, FT_LIST_BY_INDEX|FT_OPEN_BY_SERIAL_NUMBER);
if ( ft_status == FT_OK)
{
// FT_ListDevices OK, serial number is in serialNumber
printf("Device Serial Number: %s\n", serialNumber);
}
else
{
// FT_ListDevices failed
}
ft_status = FT_OpenEx(serialNumber, FT_OPEN_BY_SERIAL_NUMBER, &ft_handle);
printf("after calling FT_OpenEx\n");
if ( ft_status == FT_OK)
{
// FT_OpenEx OK, ft_handle not null
printf("FT_OpenEx succeeded\n");
}
else
{
printf("FT_OpenEx failed\n");
}
ft_status = FT_SetBaudRate(ft_handle, baudrate);
if ( ft_status == FT_OK)
{
// FT_SetBaudRate OK
printf("FT_SetBaudRate succeeded\n");
}
else
{
printf("FT_SetBaudRate failed\n");
}
ft_status = FT_SetFlowControl(ft_handle, FT_FLOW_RTS_CTS, 0, 0);
if ( ft_status == FT_OK)
{
// FT_SetFlowControl OK
printf("FT_SetFlowControl succeeded\n");
}
else
{
printf("FT_SetFlowControl failed\n");
}
// Flush the FTDI's buffers
if ((ft_status = FT_Purge(ft_handle, FT_PURGE_RX | FT_PURGE_TX)) != FT_OK)
ft_error_exit("FT_Purge", ft_status);
// Create reader and writer threads.
int pterr;
sigset_t sig_set;
(void)sigfillset(&sig_set);
pthread_attr_t ptattr;
if ((pterr = pthread_attr_init(&ptattr)))
pthread_error_exit("pthread_attr_init", pterr);
if ((pterr = pthread_attr_setdetachstate(&ptattr,
PTHREAD_CREATE_DETACHED)))
pthread_error_exit("pthread_attr_setdetachstate", pterr);
pthread_t reader_id, writer_id;
if ((pterr = pthread_create(&reader_id, &ptattr, reader_func, NULL)))
pthread_error_exit("pthread_create reader", pterr);
// Now wait for a signal to terminate us
int caught_sig;
if (sigwait(&sig_set, &caught_sig))
std_error_exit("sigwait");
exit(0);
}
pthread_cond_wait で常にスタックします。任意の考えをいただければ幸いです。