-1

https://websiteforstudents.com/switch-static-ip-address-ubuntu-17-04-17-10/を使用している参照として、ローカルマシンのエイリアス IP を作成する必要があります。

ネットワークインターフェイスを次のように表示するifconfig:

wlp3s0: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500
        inet 192.168.1.106  netmask 255.255.255.0  broadcast 192.168.1.255
        inet6 fe80::b7c0:76a:d0c0:3a7b  prefixlen 64  scopeid 0x20<link>
        ether 6c:71:d9:21:ff:61  txqueuelen 1000  (Ethernet)
        RX packets 389087  bytes 342937114 (342.9 MB)
        RX errors 0  dropped 0  overruns 0  frame 0
        TX packets 270723  bytes 54566302 (54.5 MB)
        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0

しかしsudo nano /etc/network/interfaces、リファレンスに記載されているように実行すると、別のファイル コンテンツが表示されます。

# interfaces(5) file used by ifup(8) and ifdown(8)
auto lo
iface lo inet loopback

だから私はインターフェースを手動で追加しようとします/etc/network/interfaces:

# The primary network interface
auto wlp3s0
iface wlp3s0 inet dhcp

iface wlp3s0 inet static
address 10.254.254.254/24

しかし、実行しているときは機能しませんsudo ifdown wlp3s0 && sudo ifup wlp3s0

ifdown: interface wlp3s0 not configured
Internet Systems Consortium DHCP Client 4.3.5
Copyright 2004-2016 Internet Systems Consortium.
All rights reserved.
For info, please visit https://www.isc.org/software/dhcp/

Listening on LPF/wlp3s0/6c:71:d9:21:ff:61
Sending on   LPF/wlp3s0/6c:71:d9:21:ff:61
Sending on   Socket/fallback
DHCPREQUEST of 192.168.1.106 on wlp3s0 to 255.255.255.255 port 67 (xid=0x4ec976a9)
DHCPACK of 192.168.1.106 from 192.168.1.1
RTNETLINK answers: File exists
bound to 192.168.1.106 -- renewal in 3106 seconds.
RTNETLINK answers: File exists
Failed to bring up wlp3s0.

私はこれで初心者です、問題を解決するのを手伝ってください、ありがとう!

4

1 に答える 1